[X]Assistant

[O_dinochka]

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ MTK 6582 пїЅ OS Lollipop ( пїЅпїЅпїЅпїЅ 3.10.54) download

Device or OS, firmware:All smartphones based on MTK 6582 and kernel 3.10.54 (except sprout).

Good afternoon friends. Today I want to tell you how to port firmware based on the 3.10.54 kernel and the MTK 6582 processor.
There are many instructions on the network for porting firmware based on Android 4.4 and the kernel 3.4.67, but there is no way to port based on Lollipop and the kernel 3.10.54.
I want to tell you how I do it.
First you need to have your (stock) unzipped system folder.
In order to unpack the system.img I useExt4xtractor.
After you unpacked system.img, you need to transfer the following files from the drain to the port:
1) Etc:

-etc / firmware / modem_1_wg_n.img
-etc / apns-conf, spn-conf, virtual-spn-conf-by-efgid1, virtual-spn-conf-by-efpnn, virtual-spn-conf-by-efspn, virtual-spn-conf-by-imsi

2) Lib:

-lib / hw / gralloc.default, gralloc.mt6582, hwcomposer.mt6582

3) Use your stock boot.img (3.10.54)
In rare cases, it is sometimes not enough to use your stock boot, in this case it is necessary to transfer from stock boot.img to the boot kernel of the ported firmware.

All of the above is enough to run the firmware on the 3.10.54 kernel and the MTK 6582 processor
But with 80% confidence I can say that certain functions of the phone will not work for you. To solve these problems, I usually use:
-No sound:
lib / hw / audio.primary.default.so audio.primary.mt6582.so
-Camera does not work:
lib / libcameracustom.so libcamdrv.so
- The flashlight doesn't work:
lib / libfeatureio.so
- Fix LED (if replacing the lights.default.so file and editing services.jar did not help)
-Inverted screen:
With notepad ++ open build.prop
Find the line ro.sf.hwrotation = 180 and change the value 180 to 0 (or vice versa).
To change the screen resolution with notepad ++ open build.prop and find ro.sf.lcd_density = 220 and change the value 220 to any other.
If there are questions, we write in the answers under the topic. You can always find the firmware for the MTK 6582 processor and the kernel 3.10.54 here:

DEXP Ixion ES2 5 "- Discussion

I want to thank for the help in creating instructionsqwertyTom
How to unpack and pack system.new.dat

Assembly instructions for ANDROID from sources

Donors

Donor CyanogenMOD 12.1 for the kernel 3.10.54+

Post has been editedRu4kin - 01.12.16, 09:27

Reason for editing: Fix LED

[Roman36Liman]

It's useless, it hangs on bootanimation and everything, later, when I put my stock boot through the patch, and all the necessary ones, an "Android Update" happens, and later "Running applications" and that's it.
P.S. I tried even stupidly stock bottles - hangs on butanimation.

Post has been editedRoman36Liman - 26.10.15, 16:35

[Vladik.nosikov]

Do not tell me what is the reason for the hang of the phone, when entering any application, there is nothing in the logs, on almost all the firmware that I ported
It starts normally, without errors, etc., and even in the menu everything is fine, and if you enter any application, the phone hangs

Post has been editedVladik.nosikov - 26.10.15, 20:32

[djperya]

Who can look at the log, already broke his head, hangs on the boot animation.
log_1_281015.txt(2.31 MB)

[qwertyTom]

djperya,what are you porting from where and where?

[djperya]

Exception OS from Smart Rom Team for Zera F Rev.S20 on LG Spirit H422
in parallel I ask in the branchPorting firmware from device to device with MT6582 processor
I will be glad to any help :)

Post has been editeddjperya - 29.10.15, 21:37

[qwertyTom]

djperya,Mutki with skis are not understandable, your firmware by our method also hangs on the animation

[Acid_Witch]

qwertyTom,
Rumor has it that the skis are more close to Qualcomsk.

[qwertyTom]

vlad.masti,According to Google standards, like a sprint, more precisely

Post has been editedqwertyTom - 30.10.15, 17:59

[vandal79]

Roman36Liman @ 10.26.2015, 15:40

It's useless, it hangs on bootanimation and everything, later, when I put my stock boot through the patch, and all the necessary ones, an "Android Update" happens, and later "Running applications" and that's it.
P.S. I tried even stupidly stock bottles - hangs on butanimation.

What are you talking about?

[l33tn00b]

vlad.masti @ 10/30/2015, 20:43

Rumor has it that the skis are more close to Qualcomsk.

Yes, there is a hole there, as on ordinary mtk. Only still their crutches pushed

[fx-mod]

Vandal79 @ 10/30/2015, 18:21

What are you talking about?

This is his after porting. I have the way too.

It interferes with this

So hangs on the launch of applications and logcat swears on

F / libc (839): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x24 in tid 839 (mediaserver)

I / ServiceManager (134): service 'media.audio_flinger' died
I / ServiceManager (134): service 'media.player' died
I / ServiceManager (134): service 'memory_dumper' died

[Ruzil1990]

Has anyone tried to launch the LG Magna firmware? There is a percentage of 6582, I'm picking up the second day, the maximum I achieved so this is boot animation, but the animation lasts for 10 minutes and then the brightness decreases a little, the vibration and the body goes to a constant reboot ..... Can anyone advise what? Booth stock, tried to pick it up, with the slightest changes in the stock boot, the firmware does not start at all.

[qwertyTom]

Ruzil1990,With Mikhoy, various manipulations were carried out, any request from LG hangs on the animation, xs what happens to them

[fx-mod]

qwertyTom @ 11/06/2015, 23:03

With Mikhoy, various manipulations were carried out, any request from LG hangs on the animation, xs what happens to them

Try to throw 20 cameras

[fx-mod]

Yura990 @ 11/03/2015, 21:32

fx-mod,
Try libandroid_runtime.so replace

My camera is to blame for everything) Replaced all the cameras, everything is normal.

[blackeangel]

O_dinochka @ 10/22/2015, 09:51

Good afternoon friends. Today I want to tell you how to port the firmware ...

Why not? Yes, because the development is not all update on on their devices.
From here, immediately the question is, where can I get the stock boot.img with the kernel 3.10.54, if it's not officially available?
And what is the probability, if you take a very similar device and stupidly steal the firmware from it, will it start?

Post has been editedblackeangel - 20.11.15, 00:35

[qwertyTom]

blackeangel @ Today, 01:33

far from all developed by

An example of this is HS Zera F Rev.S

blackeangel @ Today, 01:33

stock boot.img with kernel 3.10.54

5.0.2 there are collected by enthusiasts on it, but conditionally stock stock

blackeangel @ Today, 01:33

awl if you take a very similar apparatus

if the clone starts, then the probability of 10% if there is only one firewood

[obsvg216]

blackeangel
Attempt not torture, you will not check, you will not learn

[blackeangel]

[email protected], 13:38

blackeangel
Attempt not torture, you will not check, you will not learn

I tried-loads logo.bin then a white screen for a couple of seconds, then a reboot, and so on in a circle. Where to dig?

[qwertyTom]

blackeangelbuild the core for your smartphone