Assistant
| REPLY |
 Google Nexus 5X - Official firmware |
under the messages to which you want to add links. Message#2  24.10.15, 19:30 | |
 [offline] Group: Honorary Gameday Messages 2297 Check in: 29.03.11 Nokia 7 Plus Reputation:  860  | Instructions for working with Fastboot This manual describes all the elementary actions that are performed when working with a smartphone using the official utility for firmware from Google -Fastboot. Standard warning Remember -everything you do - you do at your own peril and risk! The authors of the manuals are not responsible for your actions! I draw your attention that before starting any work with a smartphone, you need to save everything you need, because With many procedures, you may lose data from your smartphone. The basic procedure, which basically allows you to work with a smartphone, is -Unlocking the bootloader, which erases all your data from the smartphone's memory!It is also necessary that the battery charge is at least 30%, preferably 50%, because Many procedures significantly waste battery power. 1. Preparation of software and PC To work you must downloadRequired software (ADB / Fastboot) from the headeron your computer. For those who use Ubuntu Linux - in the standard Ubuntu repositories there are packages with ADB and Fastboot. You can install them by running the commands in the Terminal: sudo apt-get install android-tools-adb android-tools-fastboot All work is performed in the Command Line, to start it - press the Win + R key combination, in the input window type cmd and press "Open" / Enter key, or find the command line in Start - All Programs (Applications) - Standard (System) - Command line. In the command line, go to the directory with the required software command: cd C: \ Nexus Pay your attention if your working folder with the necessary software and firmware is located on another disk, for example,D then the team cd to go to the desired folder should be used with the key / d i.e .: cd / d D: \ Nexus 2. Connecting a smartphone and checking the connection. Teamfastboot devices Put your smartphone in bootloader / fastboot mode by simultaneously holding the buttons: Volume down + Power button (Volume down + Power) and connect it to your computer. Install the drivers, the drivers are in the folderusb_drivers in the archive you downloaded with the necessary software, as well as in the header there is a link to the current Google drivers (Google USB Driver). At the command prompt, run: fastboot devices 3. Work with the loader. Teamsfastboot oem lock / unlock First of all, you must allow unlocking the explorer on the smartphone itself. To do this, activate the menu "For Developers" - "Settings - About phone", 7 times click on the Build number field (located at the very bottom). In the "For Developers" menu, activate the ability to unlock the bootloader (5th item above). Put your smartphone in bootloader / fastboot mode by simultaneously holding the buttons: Volume down + Power button (Volume down + Power) and connect it to your computer. To unlock the bootloader, run the command: fastboot oem unlock After unlocking the bootloaderwithout fail need to restart the smartphone. Now, when loading, a warning will appear on the screen in front of the Google logo, indicating that it is impossible to check the security of a smartphone with an unlocked bootloader and a request to lock the bootloader back. Ignore this warning, it does not interfere with the operation of the device. Read more -https://support.google.com/nexus/answer/6185381 To lock the bootloader, use the command: fastboot oem lock 4. Reboot the smartphone. Teamfastboot reboot In the process of working in fastboot, after some operations, you will need to restart the smartphone. You can reboot the smartphone in the system with the command: fastboot reboot fastboot reboot-bootloader 5. Firmware sections (recovery, core, etc.). Teamfastboot flash With this command, you can flash all sections on your smartphone. The loader for this must be unlocked. The following is a list of sections with the appropriate commands.
Wherefilename.img Is the file name of your .img image of the recovery / kernel / radio module, etc. (for example - fastboot flash recovery twrp-2.8.7.0-bullhead.img) With the help of these commands, you can flash both stock images (stock recovery, kernels, etc.) and custom ones (recovery, kernels, etc.). The required image (.img) must be downloaded to the main working folder (remember, in our caseC: \ Nexus). Images can be downloaded from the caps in the corresponding spoilers. Sew on health :)  Post has been editedAlexUnder (UA) - 26.08.16, 13:08 |
Message#3 02.11.15, 11:03 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | ��������� root-���� downloadA warning To get root, you need to unlock the bootloaderAll your data will be deleted.. All actions with the device you do at your own peril and risk!
Taken fromXDA-developers  Post has been editedAlexUnder (UA) - 26.08.16, 15:52 -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#4 05.11.15, 12:52 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | OTA updates:from MDB08I to MDB08L from MDA89E to MDB08I OTA updates to MMB29K:update from MDB08L; update from MDB08M OTA updateMMB29K to MMB29P OTA updatefrom MMB29P to MMB29Q OTA updateMMB29Q to MHC19J OTA updatebefore Android N developer preview 1 We distribute the Internet from the phone (tethering) A file manager with root rights (Root Explorer, ES Explorer, etc.) and a terminal are required. In principle, it is possible to work with adb, who needs to guess what commands to enter;) 1. Open /system/build.prop for editing and add the line:net.tethering.noprovisioning = true . Save, close 2. Check and make sure that the rights to build.prop 644 (rw-rr--) 3. We start the terminal and command:settings put global tether_dun_required 0 4. Reboot. All is ready.  Post has been editedAlexUnder (UA) - 31.07.16, 18:59 -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#5 10.11.15, 21:10 | |
[offline] Group: Honorary Gameday Messages 2297 Check in: 29.03.11 Nokia 7 Plus Reputation: 860 | Instructions for the firmware of the original image (return to stock firmware) Before flashing, you need to download the latest software from the topic header. Before you start, you need to save everything you need from your smartphone, becauseUnlocking and locking the bootloader erases all data from the smartphone's memory!It is also necessary that the battery charge is at least 30%, preferably 50%. Standard warning Remember -everything you do - you do at your own peril and risk! The authors of the manuals are not responsible for your actions and curves hands! Flashing process 1. Preparation First of all, you need to allow unlocking of the explorer on your smartphone. To do this, activate the menu "For Developers" - "Settings - About phone", 7 times click on the Build number field (located at the very bottom). In the "For Developers" menu, activate the ability to unlock the bootloader (5th item above). To work you must downloadprerequisite software (ADB / Fastboot). Unpack the downloaded archive to any place convenient for you on the computer,in our example we will consider the wayC: \ Nexus that is, suppose the archive was unpacked to the root of the disk WITH and its contents are in the folder Nexus . You also need to download the current stock image of the firmware from the header and unpack the contents of the archivein the same folder as the necessary software (ADB / Fastboot). Read more 1. Download the necessary software (ADB / Fastboot) from the header and unpack it into the Nexus folder on drive C. 2. Download the archive with the firmware (for example, on disk C). 3. Unpack the archive with the firmware. There is one small nuance that sometimes puzzles users. In addition, the latest versions, for example, WinRar behave somewhat strange. In order not to lecture on what istgz, tarand Unix philosophy, explain on fingers: - so, if the downloaded firmware archive has an extension.tar - unzip it should be using WinRAR (or 7-Zip), this forms a folder with the same file - then, click on this file with the right mouse button, select "Open" and select WinRar in the program selection window, and then select "Extract" in the menu of the archiver. Then we actually get the firmware components and the batch file.flash-all.bat that need to be moved to a folder C: \ Nexus . 4. Transfer the contents of the firmware to the desired working folderC: \ Nexus which now looks like this (ADB / Fastboot + firmware content). In the command line, go to the folder with the necessary software command: cd C: \ Nexus Pay your attention if your working folder with the necessary software and firmware is located on another disk, for example,D then the team cd to go to the desired folder should be used with the key / d i.e .: cd / d D: \ Nexus Install the drivers, the drivers are in the folderusb_drivers in the archive you downloaded with the necessary software, as well as in the header there is a link to the current Google drivers (Google USB Driver). Read more
fastboot devices 2. Unlocking the bootloader If your bootloader was not unlocked earlier, or you blocked it back, then you need to unlock it for firmware. Run the command: fastboot oem unlock Now, when loading, a warning will appear on the screen in front of the Google logo, indicating that it is impossible to check the security of a smartphone with an unlocked bootloader and a request to lock the bootloader back. Ignore this warning, it does not interfere with the operation of the device (Android Pay does not work, there may be problems with the operation of banking applications, etc., etc. ) [/ url] 3. Firmware stock image Google images provide the possibility of firmware in two ways: Method number 1 - simple automatic way.
Attention! If after flashing your phone with 32 GB of memory now displays only 16 GB, then you need to make a "wipe data / factory reset" from the stock recovery! To get to the recovery menu, at the sight of a recumbent robot with a vocal sign, hold down the Power button for a short time and press the Power Button down and press the Volume Up button once. Or you can perform a full reset from the menu of the phone itself (Settings - Restore and reset - Reset settings). Ps. When flashing, by launching flash-all.bat, all data will be deleted, but this can be avoided by opening the file flash-all.bat with notepad, removing the key in the last command-w, Save. Method number 2 - manual step-by-step (file-based) method.
Attention!If after flashing your phone with 32 GB of memory now displays only 16 GB, then you need to make a "wipe data / factory reset" from the stock recovery! To get to the recovery menu, at the sight of a recumbent robot with a vocal sign, hold down the Power button for a short time and press the Power Button once and press the Power Up button once to press the Volume Up button. Or you can perform a full reset from the menu of the phone itself (Settings - Restore and reset - Reset settings). Ps. If you do not enter the two penultimate commands (fastboot flash cache cache.img and fastboot flash userdata userdata.img), then the process of the firmware will not completely reformat the partitions, thus the user files will remain.  Post has been editedAlexUnder (UA) - 18.02.18, 11:58 |
Message#6 14.11.15, 12:52 | |
DeathRun Portable [offline] Group: Developers Messages 929 Check in: 16.12.11 Google nexus 5 Reputation: 472 | People like data encryption disable |
Message#7 15.11.15, 20:59 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 222 Check in: 16.12.08 Oneplus 5 6/64 Reputation: 116 | [email protected], 12:52  People like data encryption disable 1. Unlock the bootloader. 2. Put a custom kernel: from Chainfire fromhere(fully stock with encryption disabled) orElementalX(with additional features). 3. Put custom recoveryTWRP. 4. In the recovery, make Format Data -THEREFORE, ALL DATA WILL BE TRANSFERRED. Post has been editedkutaxov - 04.12.15, 18:56 -------------------- Samsung Galaxy Tab 3 SM-T310 | Samsung Galaxy Tab S2 SM-T810 |
Message#8 27.11.15, 09:10 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | shurikelo I support. In the modular money box, which includes a speaker during the main operation (playing music, watching videos, ringing, etc.). 2 options - just turn on the speaker (Nexus_5x_Surround) and turn it on and make it louder (Nexus_5x_Surround_ + 1Loud). Nexus_5x_ReverttoStock.zip to roll back to normal stock status. Sew through the recovery, preferably with a preliminary backup / system. Files  Nexus_5x_Surround.zip(181.66 KB)Nexus_5x_Surround_ + 1Loud.zip(181.66 KB)Nexus_5x_ReverttoStock.zip(181.63 KB)Taken fromhttp: //forum.xda-devel…sound-testers-t3252659 -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#9 07.12.15, 12:10 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2835 Check in: 19.09.11 Google pixel 3 Reputation: 232 | Removing a warning message when downloading an unlocked bootloader (unlocked warning) Flash with custom recovery: visible-BHZ10i-n5x.zip(533.27 KB) Post has been editedAlexUnder (UA) - 31.07.16, 19:11 -------------------- It was: HTC DesireS / One X / One (M7) / (M8) / 10, Iphone 5/7 / Xs, Sony Xperia ZL / Z / Z1 / Z2 / Z3 / Z5 / X / XZ1 / XA2 / XZ2 / XZ3, Lumia 925/830, Samsung GalaxyS4 / S6 / S6 edge / S7 / S7 / S8 / S9 / S10, LG G2 / G3, Sony Tablet Z, Nexus 5 / 5X, OnePlus3 / 5 / 5T, 6, Pixel / 2 Now Pixel 3, Fossil Sport, Xperia Z3 Tablet |
Message#10 08.12.15, 00:15 | |
May the Force be with you [offline] Group: Friendssavagemessiahzine.com Messages 2433 Check in: 14.05.11 Apple iPhone SE Reputation: 593 | Factory Images 6.0.1 (MMB29K): Link MD5 Checksum: b0dc5f572f5ec6cb58aeebef487211a2 SHA-1 Checksum: a5eaf7150ee2dbe78901a2f9c515a8de2cf3a37b A source:http: //www.xda-develop...rity-patches-and-more/ -------------------- Apple iPhone SE 32 GB • AirPods • NVIDIA SHIELD tablet K1 • NOOK Simple Touch • Xiaomi Mi Box S •PC |
Message#11 08.12.15, 10:32 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | Updated to MMB29K without data loss by the following algorithm: 1. Uploaded Factory Image andcore imageon the computer, SuperSU in the phone 2. Connect the phone, boot into the bootloader 3. I flashed the radio module (fastboot flash radio radio-bullhead-m8994f-2.6.30.0.68.img) 4. I patched the modified kernel (fastboot flash boot bullhead-mmb29k-c3k-chainfiresepolicy-disabled-forceencrypt.img) 4. I flashed the system (fastboot flash system system.img) 5. I flashed the vendor (fastboot flash vendor vendor.img) 6. I flashed the cache (fastboot flash cache cache.img) 7. I rebooted into recovery, flashed SuperSU, wiped cache and dalvik 8. Rebut. The first download was slow due to optimization. -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#12 09.12.15, 09:01 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | OTA updates to MMB29K:update from MDB08L; update from MDB08M -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#13 09.12.15, 21:38 | |
Experienced [offline] Group: Banned Messages 424 Check in: 08.09.08 Google Nexus 5X Reputation: 8 | In my opinion, the update is better to put hands! But it can turn out like here.LG Nexus 5X - Discussion (Post by rabbit_ekb # 45146630)At the moment a person has a BRICK ((( And this is not the only such case !!! Post has been editedshurikelo - 09.12.15, 21:39 |
Message#14 11.12.15, 09:19 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1702 Check in: 19.03.10 Samsung Galaxy S7 SM-G930FD Reputation: 128 | zaletniy99, If it's scary to work with fastboot, there is a utility with a graphical interface,Nexus Root Toolkit. To upgrade it is enough to flash the boot (if the kernel is patched then find the appropriate patched on xda), radio, system and cache from Factory Image -------------------- Alcatel OTE ->Siemens A60 ->Motorola C650 ->Siemens CF75 ->Nokia E60 ->HTC Hero ->ASUS PadFone 2 ->LG Nexus 5X ->Samsung Galaxy S7 + Sony SmartWatch 2 |
Message#15 18.12.15, 00:26 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 16.10.11 Nokia 6300 Reputation: 50 | One moment missed clarify. Suppose I unlocked the bootloader, turned off encryption, etc. Is it possible to re-enable data encryption after installing TVRP and Zian? |
Message#16 18.12.15, 06:51 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2835 Check in: 19.09.11 Google pixel 3 Reputation: 232 | [email protected], 00:26 One moment missed clarify. Suppose I unlocked the bootloader, turned off encryption, etc. Is it possible to re-enable data encryption after installing TVRP and Zian? The kernel is responsible for encryption. The stock core must be set. -------------------- It was: HTC DesireS / One X / One (M7) / (M8) / 10, Iphone 5/7 / Xs, Sony Xperia ZL / Z / Z1 / Z2 / Z3 / Z5 / X / XZ1 / XA2 / XZ2 / XZ3, Lumia 925/830, Samsung GalaxyS4 / S6 / S6 edge / S7 / S7 / S8 / S9 / S10, LG G2 / G3, Sony Tablet Z, Nexus 5 / 5X, OnePlus3 / 5 / 5T, 6, Pixel / 2 Now Pixel 3, Fossil Sport, Xperia Z3 Tablet |
Message#17 22.12.15, 11:14 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2835 Check in: 19.09.11 Google pixel 3 Reputation: 232 | Enable digital stabilization like on N6P - need root - find the build.prop file -open it with an editor (for example in ES Explorer) and add lines to it persist.camera.eis.enable = 1 persist.camera.is_mode = 4 -save -reboot -check  Post has been editedAlexUnder (UA) - 02.10.16, 21:43 -------------------- It was: HTC DesireS / One X / One (M7) / (M8) / 10, Iphone 5/7 / Xs, Sony Xperia ZL / Z / Z1 / Z2 / Z3 / Z5 / X / XZ1 / XA2 / XZ2 / XZ3, Lumia 925/830, Samsung GalaxyS4 / S6 / S6 edge / S7 / S7 / S8 / S9 / S10, LG G2 / G3, Sony Tablet Z, Nexus 5 / 5X, OnePlus3 / 5 / 5T, 6, Pixel / 2 Now Pixel 3, Fossil Sport, Xperia Z3 Tablet |
Message#18 05.01.16, 00:58 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1441 Check in: 02.08.12 Google pixel 2 Reputation: 159 | January Security Update: 6.0.1 (MMB29P) https://dl.google.com/...p-factory-b3dae7eb.tgz Ps Will there be a curator here sometime? -------------------- Google pixel 2 | Stock 10.0 Q beta |
Message#19 12.01.16, 19:59 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 237 Check in: 16.10.11 Nokia 6300 Reputation: 50 | Android 6.0.1 Marshmallow (MDB29K) Android 6.0.1 Marshmallow (MDB29P)  Post has been editedAlexUnder (UA) - 31.07.16, 19:51 |
Message#20 12.01.16, 19:59 | ||
cosmo [offline] Group: Friendssavagemessiahzine.com Messages 5003 Check in: 04.07.10 Oneplus 5 8/128 Reputation: 834 | If after connecting the device to the PC, it is displayed but the folders and files are not visible, then it is enough to switch to developer mode and change the protocol type from MTP to PTP, connect usb, after the phone is determined, disconnect the cable, return the MTP protocol and after that all files will start to display, this is a Windows bug
Post has been editedbzz11g - 12.01.16, 19:59 -------------------- Sent via unofficial ForPDA client GoogleNexus 5X,B & NHD nook +B & NNook Simple Touch with GlowLight | |
Message#21 14.01.16, 13:39 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 956 Check in: 23.10.10 Google Pixel 2 XL Reputation: 12 | The people, what does the factory unlock item of the bootloader mean in the developer menu? |
| mobile version | Now: 05/19/19, 20:24 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement