[X]Assistant

[weider.03]

DiscussionOysters T102MR 3G
Oysters T102MR 3G,
Description" | Discussion пїЅ | Purchase пїЅ |

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

Android platform
Android operating system: 4.4 KitKat
Processor frequency: 1.3 GHz
The number of processor cores: 2 - (MTK8312)
Memory
RAM: 1GB
Built-in memory: 8 GB
Memory Card Slot: Yes
Memory Card Type: microSD (TransFlash)
Maximum memory card capacity: 32 GB
Display
Touch Screen: Yes
Touch screen type: capacitive
Multitouch: Yes
Screen Type: TFT
Screen diagonal: 10.1 "
Automatic screen rotation: Yes
Screen resolution: 1024 x 600 pixels
Interface
USB connector type: microUSB
SIM card slot: Yes (standard)
Dual SIM support: Yes
Built-in microphone: Yes
Headphone output: 3.5 mm
Network
Wi-Fi support: Yes
Wi-Fi IEEE 802.11n
3G (UMTS) support: Yes
Bluetooth: yes
GSM ranges: 850, 900, 1800, 1900
Navigation
GPS module: Yes
Multimedia
FM radio: Yes
Camera
Rear camera: Yes
Front camera: Yes
Rear camera resolution: 0.3 megapixels
Front camera resolution: 2 megapixels
Sensors
Display orientation sensor: Yes
Advanced Sensors: Accelerometer
Nutrition
Battery capacity 6000 mAh

Images

Firmware

Build number (SA001_SA003_20150130-20150314) (weider.03)
Firmware T102MR SB001 (weider.03)
T102MR-3G_fw_20150415-SB001 (snzuev)
Video instruction full firmware

Recovery

Recovery

Drivers, utilities

Main driver
Driver for MTK Droid Tool (used after firmware)
SP_Flash_Tool (firmware utility)
Video instruction full firmware

Useful

Delete trash permanently
How to disable digital signature driver on windows 7-8-10
Cold Start GPS Calibration
Google account sync issue
Touchscreen calibration
Login to the recovery and reset to factory settings
How to repair IMEI
Recovery method imei if there is no backup
How to restore a brick
Another option for the restoration of bricks
Update time zones
problems with cd card

How to create backup

1. Option (with photo)
2. Option (video)

getting ruut rights

Kingo Android Root

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedweider.03 - 25.12.17, 18:11

Reason for editing: Brick repair

[dimilian80]

All so. In this tablet, a cheap TFT matrix with poor viewing angles.

Dima Sorokin, and you, by the way, not our personal savior with a tablet version SB001? ;)

Post has been editeddimilian80 - 07.11.15, 17:25

[dimilian80]

Here is the version on Android 4.4 -whale cat
It works sound, wi-fi, the correct orientation of the screen.

Does not work:
- camera
- the built-in storage device (SD-1) is not available
- the touch panel is at least inverted.

Two days killed on the "revitalization" of the tablet; (
Probably enough. Take over the baton. And so you can buy a memory card and a case with a built-in keyboard - the output is a finished netbook.

Perhaps, for those who did not use Format for firmware, the touch will work normally, as the nvram is preserved. To use this firmware, I recommend activating the display of touch points in the developer’s settings, which will allow collecting nerves in the bundle to work without a mouse.

Post has been editeddimilian80 - 09.11.15, 17:56

Reason for editing: whale cat

[Dima Sorokin]

dimilian80,Noo, I have a SA001 ..

[alexku69]

I am an arrogant moron! Thrice ...

I did not backup. I did not read the forum (although I know about the precedents). I hoped to the manufacturer's website.
In the end - in the hands of a merry winking backlit piece of glass framed with plastic.

[kostik6551]

[email protected], 22:24

Get almost running firmware - i-drive

Perezaley, please, firmware. The link is not true!

[alexku69]

Here is the version on android 4.4 - whale

Posted 11/09/2015 at 15:28:

With the saint oysters sent a link in the mail -Here is such
With it, the tablet does not turn on at all.

[dimilian80]

Kostik6551 @ 11/09/2015, 15:38

Perezaley, please, firmware. The link is not true!

I refused Android 4.2.2. It makes no sense. Try 4.4.2 - link above.

alexku69
Do not be nervous. No one of us could have thought that the company would throw everyone. Even with the initial firmware I noticed that the blocks are different in the flash are sewn ... but clicked on "update" without any ulterior motive.


Py.Sy. Proposed by the prosh does not suit us. It turned out to run it "with crutches", but the result is the same as in my "kit-kat." And generally speaking! There, the preloader is left: after flashing it, the flash will no longer see the tablet in the usual way. Here's how can SUCH offer ?!

Please everyone: write to the soap in support! Let them give you a normal one. He himself wrote them several times ... We must all.

Post has been editeddimilian80 - 09.11.15, 22:38

[kostik6551]

[email protected], 19:01

Please everyone: write to the soap in support!

I wrote several times, sent the answer the same ... contact the service center or visit the off. site!

[konsulll]

So no one won the burning highlight on sb01?

[dimilian80]

Kostik6551
You can add specifics: ask for the firmware version of the assembly Oysters_T102MR_3G_SB001_23042015

I assume that this set of numbers is a date.

Konsulll
And just read 2 (!!!) pages of posts, apparently, not destiny?

[alexku69]

Maybe a little to the side, but ...
Somehow, at the dawn of cardsharing ntv +, some programs were introduced into the firmware of some routers, after which the flash was rewritten from the memory of the router itself.
The question arose - is there also a way in the android to access the tablet via telnet, fasten the correct display module and save the configuration?

PS: To dimilian80 - I ask pardon. This I wrote to myself exclusively that three times.

Post has been editedalexku69 - 10.11.15, 11:10

[kostik6551]

Dimilian80 @ 11/10/2015, 07:28

You can add specifics: ask for the firmware version of the assembly Oysters_T102MR_3G_SB001_23042015

I will try to knock on, I will unsubscribe from the result!

[konsulll]

dimilian80,
The fact of the matter is that I read it, but I did not find anything. Maybe I missed something and therefore I ask again

[dimilian80]

Alexku69
You can remove the log of the loading process and determine what is loaded. Through ADB.
But lately, it seems to me that the key drivers are protected in the kernel kernel. You can't get in there. If there were source codes, then it would be possible to build a new kernel. Oisters source is unlikely to give.
There are a couple more ideas. I will sort this out.

Konsulll
Prosha in post 24

[alexku69]

With the help of the latest (in the list) firmware, the tablet came to life again. Everything is working. Only writes - have the wrong one. Correctable?

[dimilian80]

alexku69

Thank you, kind man! And then I did not answer the support.

Yes, exactly - the last earned. Only thing had to be replacedsystem.img. For some reason, the basic request for 10 minutes hung on the logo and not in any.
Who will also hang, after the firmware, run Flash Toole again, remove all the checkmarks, then double-click on ANDROID and specify the path to the file. Download mode.
This is the native section, from the original Oyster flash from their site. These are programs (mostly).

Yes, fixable. Read here -droid thuls

By the way, check which version of the build (about the tablet).

Post has been editeddimilian80 - 10.11.15, 16:25

[alexku69]

I also hung for a long time when turned on, but still turned on.

Build number Oysters_T102MR_3G_SA001_15042015

[dimilian80]

For sure. I waited - and the "native" prose earned.
But now I know how to deal with the virus, if there is one (for this, I reflash it).

IMEI is restored in a couple of minutes.

And here is our screen. Compatible display matrix - LCD Driver IC: 0-MFP0070126_1024X600 (if someone comes in handy).
And, of course, another scarecrow:
"ATTENTION! Fake Hardware is written in the kernel or the firmware does not match the phone!"

I wonder why, having so many firmware, Oysters did not post them on the site? What was the work of service centers? But let's not talk about sad things .... The tablet is alive!

[alexku69]

Yes. IMEI restored. Just from the service menu by sending an AT command for each of the simholders.
AT + EGMR = 1.7, ”IMEI"

After the plus space, otherwise the error

[tuchka11]

All the buzz turned out to be flashed with the latest versionhttp: //savagemessiahzine.com/pages/g…-3G_fw_20150415_AL.zip

imei 2 things ok
sensor works well
communication at height
ATP alexku69