Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Xiaomi Mi4c - MIUI firmware |
Message#1 27.09.15, 15:44 | |
music lover [offline] Topics Curator Group: Curators Messages 5177 Check in: 26.11.11 Xiaomi Mi Mix 2 Reputation: 868 | Xiaomi Mi4c - MIUI firmware Mi4c, Mi4 C, libra Description | Discussion � | Purchase � | Marriage � | Accessories � | Firmware � | Bootloader unlocking � | Custom firmware � | Power consumption (autonomy) � | Xiaomi club � | Modification and decorations � | Mi Account � | Configure Notifications � | Important information FAQ >>>FAQ<<< Mini FAQ on frequently asked questions Troubleshooting- solving common problems FAQ on the locked bootloader Newbie Questions Questions beginner root user What is ADB (Android Debug Bridge). ADB commands. FastBoot commands TeamWin FAQ (TWRP) All about MIUI versions What is WIPE in recovery and how to do it Firmware from xiaomi.eu (MIUI 9/10) to install only on the unlocked bootloader. Otherwise, get an infinite Mi
Before any of your actions, you should carefully deal with all the instructions and drivers! ����� �������� ����� ����������, ������ ������ �����, ������ �����������? downloadDrivers and Utilities Before installing drivers, it is strongly recommended to disable the digital signature verification of Windows drivers. For Windows 7 When the computer is turned on, after the BIOS boot up stage, often press “F8”. The Advanced Boot Options menu appears. Choose "Disable Mandatory Signer Drivers". F8 does not always work the first time, so if it does not work out, you can either repeat it 2-3 times, or resort to an alternative method. Alternative way: Open the Start menu, in the search bar we write: cmd.exe right-click on it and click "run as administrator". A command prompt will open. Enter 2 commands in turn: bcdedit.exe / set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit.exe / set TESTSIGNING ON Then restart the computer, if everything turned out, then in the lower corner of the desktop you will see an inscription about the test mode. P.S: so that you can put everything back into place again, open the console again and enter bcdedit.exe / set TESTSIGNING OFF and reboot. The inscription will disappear. For Windows 8
For Windows 10 Hold down the "Shift" button and click "Start" ->"Shutdown" ->Reboot. After the reboot, the "Select Action" window appears. Selecting "Troubleshooting" ->"Extra options" ->“Boot Options” ->Reboot. After the reboot, we will see the “Reboot Settings” window, press “F7” and wait for the Windows to reboot. MiPhone Manager Specialized software for Xiaomi devices. What can be done with this application? It installs drivers on the computer. You can flash a new firmware (installation of OTA packages - i.e. it is useless for translated firmware, only for official Kit / Eng) You can make a backup on the computer You can take a screenshot from the screen Much more MiPhone Manager Eng http://en.miui.com savagemessiahzine.com- there is Russification MiFlash A set of utilities and drivers for Xiaomi devices, as well as a flash driver. MiFlashPro- universal flasher for Xiaomi devices MiFlash 201612220 MiFlash 6.8.30 new XiaoMiFlash (MIUI8 support) - download MiFlash 2016.04.01.0 (64bit) MiFlash 2016.03.30 (64bit) Xiaomi usb drivers Mi Cloud Photo Manager- manage photos in the cloud XiaoMiTool- utility for installing firmware, TRWP, root, loader locking. Firmware OTA only works on official firmware. There is no official global firmware. Starting with version 7.2.9 (beta) firmware go on Android 7 "nougat". Stable, starting with 8.2.3.0, go on Android 7 "nougat". When switching from Android 5.1 to 7, the bootloader crashes (even if it was officially unlocked). Need to unlock again. If unlocking a particular device is not the first, then everything happens quickly, 10 seconds - and you're done. Official English-Chinese firmware Official Chinese firmware (Russian translation is missing, there is English):
It is better to do the transition from localized firmware to official via fastboot (miflash). Through TWRP, not intended for official, get a bootlap. It is also better to go through the fastboot from the “prostavanny” firmware to the official ones. When the boot loader is locked, the firmware is installed only through the system update. Latest official Chinese firmware with unblockable bootloader on the cloud Unofficial localized (translated) firmware Stable 8.5.1.0/9.5.2.0 from MultiRom, 8.9.6 Miuipro, 8.9.13 xiaomi.euin the format for MiFlash (localized firmware for MiFlash). MiuiPro 8.7.26(localized firmware for MiFlash) Firmware from xiaomi.eu (MIUI 9/10) to install only on the unlocked bootloader. Otherwise, get an infinite Mi If after installing the firmware, without leaving TWRP, immediately putMagisk, then it patches the boot, then it does not matter for which bootloader the firmware was. They are put only through TWRP Revolution Localized byMi-room Localized bymiui pro (remove% 20 in the address) MIUI 10 by Miui Pro Localized bymultirom.me Mirror Localized byxiaomi.eu (download file * libra *. Macro has changed now - multi (M4c)) Localized bymiui.su . Fresh firmware search through the news section. MIUI AM Localized bymi-globe Old firmware from the sun boy Firmware (android 7) from the teamEU for any loader. thank bestsmak xiaomi.eu 8.8.9 for any bootloader. Miui Pro 8.9.13 Miui.su firmware on the cloud mail.ru. thank fam323 Mirror to stable xiaomi.eu firmware from STISHOK Mirror on MultiRom firmware from arxangel-serg Mirror on mail.ru: miui.su, multirom, miui pro - from Begetter Mirror on mail.ru: miui pro, xiaomi.eu - thank you ffold Unofficial user firmware They are put only through TWRP EPIC ROM (DX MIUI project) Greek XTRV-7.5.25 FirmwareMasik MIUI Build from respectedahmadilvas MIUI 8 firmware by Rendix Build from a respectedgreatslon MIUI 7 / MIUI 8 by gkalen Build from respectedmasslakoff Firmware buildersMIUI based on xiaomi.eu. The sMIUI project is closed, instead of it now mi-globe Build from respectedLepi based on multirom.me Build from respectedLepi based on invalid link Build from a respectedButsch based on multirom.me (cut loader loader) Build from a respectedButsch based on invalid link AssemblySlimMiUI from the French forum based on xiaomi.eu Build from a respectedmichfood based on multirom.me and off the anglo-chinese firmware (cut loader loader) Build from a respectedterron66 based on multirom.me (cut loader loader) Build from a respectedQ.Hard Build from a respectedRaproid Mod firmware from xiaomi.eu WITHOUT Xiaomi servicesfrom dearButsch Why are unofficial firmware in the subject of official firmware? Poll results Recovery If after loading in twrp the touch doesn't work, wait 1-2 minutes and the touch will work. ZCX TWRP after installation run in Chinese, switch languageSo. Multi TWRP 3.1.1 (Cozzmy). Works on both 5 and 7 android, it is convenient when moving from 5 to 7. ZCX TWRP 3.0.2-X LP-N. Multi Recovery for any bootloader.Source code.
Instructions All for Android 7 "nougat", the transition from 5 to 7. This is where the nougat is located and works only on the nougat. Universal instructions, video instructions and instructions for the 5.1 Android, are still under the "Instructions" spoiler. All recovery (for both 5.1 and 7) are under the "Recovery" spoiler.
Device Firmware Instructions Pay attention to the date instructions. Many of them were written when there was only android 5.1 and an unlocked bootloader.
Video instructions
Other
miscellanea Discussion of topics and other decorations in the theme of firmware is prohibited. Stock apps from MIUI8
SuperSU - Advanced access control for superuser rights to applications on the device that need root. Xposed - Modified for MIUI.
8.9.13 - the last official developer. Stable 10.1.1.0 - the last official one. Support for the device is terminated. On the nougat, the bootloader does not officially unlock. The curator of the topic is scsichnik Post has been editedscsichnik - 22.04.19, 08:16 |
Message#2 29.09.15, 11:12 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 850 Check in: 26.09.11 Xiaomi Mi 5 Reputation: 173 | FAQ
Post has been editedscsichnik - 29.05.17, 08:29 -------------------- Xiaomi Mi5 Xiaomi.eu |
Message#3 02.10.15, 21:04 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 476 Check in: 08.12.10 Xiaomi Redmi Note 3 Pro Prime Reputation: 77 | Official EN-CN + firmware Localized in the cloud to mail Post has been editedBegetter - 28.02.16, 23:24 -------------------- |
Message#4 05.10.15, 09:44 | |
Visitor [offline] Group: Users Messages 14 Check in: 04.06.13 Reputation: 1 | Procedure . 1 First, sew the office. The miui_MI4c_V7.0.6.0.LXKCNCI_325cee8a44_5.1 firmware is in the header. 2 copy the firmware you want to install for example this miuipro_v5.1.1_libra_5.9.24. 3 flush tvrp and flush firmware (yes, after flashing tvrp, immediately flush the firmware you like and then the sensor will not work in tvrp) so far only this way. good luck .... |
Message#5 05.10.15, 22:23 | |
OPTIMIST [offline] Group: Curators Messages 5461 Check in: 08.08.06 Xiaomi Mi Note 3 4/64 Reputation: 796 | Bought a phone. When installing local firmware, through regular recovery or update displays the error "install update.zip failled" I tried different firmware, one result ... 1. Preparation: 1.1 On the phone, turn on the developer mode: Settings>About the device>5 times we tap on the version of MIUI. 1.2 Turn on debugging: Settings>Other ...>Down - For Developers>Developer Mode + USB Debugging. 1.3 Connect the phone to the PC. 1.4 Install drivers on a new device / device. (The drivers should be on an automountable disk when the phone is connected. Or they will be installed when installing miFlash / miPhone) 1.5 Download the attached file. Unpack it in C: \ Test 2. Check TWRP operation 2.1 Launch C: \ Test \ TestTWRP.bat 2.2 If the drivers are installed normally, the phone will ask you to authorize this PC. Allow. 2.3 Push any button. 2.4 The phone will reboot into fastboot - "the hare is repairing the android." Do not worry - all according to plan. 2.5 Once again in bat any button. 2.6 The phone will reboot into TWRP. 3. TWRP firmware 3.1 Run C: \ Test \ FlashTWRP.bat 3.2 If the drivers are installed normally, the phone will ask you to authorize this PC. Allow. 3.3 Push any button. 3.4 The phone will reboot into fastboot - "the hare is repairing the android." Do not worry - all according to plan. 3.5 Once again in bat any button. 3.6 The TWRP firmware process has gone. Do not interrupt it! Attached files TWRP Mi4C_adb_PC_install.zip(19.21 MB) Post has been editedFidelich - 07.10.15, 19:53 -------------------- 小蜜:Mi Note 3MiRoom 10.2.3 stab, miPad 4 MiRoom 10.2.1 stab |
Message#6 06.10.15, 15:02 | |
Soldering iron [offline] Group: Friendssavagemessiahzine.com Messages 1811 Check in: 19.11.09 Huawei P20 Pro CLT-L29 Reputation: 178 | |
Message#7 07.10.15, 19:54 | |
OPTIMIST [offline] Group: Curators Messages 5461 Check in: 08.08.06 Xiaomi Mi Note 3 4/64 Reputation: 796 | In connection with the receipt of several positive responses, I add a batch file forinstallationsTWRP recovery. -------------------- 小蜜:Mi Note 3MiRoom 10.2.3 stab, miPad 4 MiRoom 10.2.1 stab |
Message#8 08.10.15, 19:45 | |
Soldering iron [offline] Group: Friendssavagemessiahzine.com Messages 1811 Check in: 19.11.09 Huawei P20 Pro CLT-L29 Reputation: 178 | The Chinese have made a new TWRP I have a normal flight so far. http://en.miui.com/thread-169401-1-1.html Yandex drive: Download TWRP 2.8.7.1 For MI4C ENhttps://yadi.sk/d/1MPb34CDjcFKx UPD: after several reboots, the touch in recovery also began to fall off: ( Post has been editedkavabunga6 - 08.10.15, 20:44 -------------------- |
Message#9 09.10.15, 15:08 | |
Soldering iron [offline] Group: Friendssavagemessiahzine.com Messages 1811 Check in: 19.11.09 Huawei P20 Pro CLT-L29 Reputation: 178 | |
Message#10 10.10.15, 13:31 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 169 Check in: 07.02.14 Xiaomi Mi 4c Prime Reputation: 19 | can someone come in handy. On the original Chinese firmware there is no google market, but it can be delivered through the app store. If you type "google" in the Appstore's search engine, it will not find anything, but will offer to use the search engines canoe and "peas", select a canoe, and there google_instuler 163 kb, put it, after which this installer installs the necessary programs (frameworks, etc.) . The installer is in Chinese, but it's easy to figure out (poke in circles and wait). |
Message#11 10.10.15, 16:42 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 522 Check in: 29.12.13 Xiaomi Mi 4c Prime Reputation: 31 | TWRP Recovery 2.8.7.1 v2 -fix touch stop by 油炸 包子 downloaded from the miui forum. TWRP_2.8.7.1_For_MI4C_EN_v2.zip(18.18 MB) Post has been editedAssItch - 10.10.15, 16:43 -------------------- Xiaomi Mi4C 3 \ 32 sharp \ imx258: LOS 14.1 HnT 05.11 Jiayu G4S Black (AUO): CM 12.1 by vova.vafin Nexus 7 2013 Wi-fi (FLO) |
Message#12 11.10.15, 11:43 | |
Visitor [offline] Group: Active users Messages 28 Check in: 20.08.13 Xiaomi Redmi 4 Prime Reputation: 3 | About 800 free, before the firmware from xiaomi.eu was about 1000. I have version 2. Shil through trwp (which crookedly rose). The firmware itself was flooded without problems. But today, in the morning, when I try to reload normal trwp with a fixed phone, it chopped off and shows no signs of life. Even the diode does not burn and does not migrate. Now I will try to revive, there is an opinion that the boot has flown down. When connected to a PC, zero emotion, except for the system sound, that something is connected. |
Message#13 11.10.15, 12:09 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1550 Check in: 08.11.12 Redmi Note 7 Pro 6/128 Reputation: 2425 | Can anyone come across a similar one and tell you what to do in this situation? Phone just in the black screen, does not react to anything. See on the PC in the "Device Manager" that a new one appears, it may be a QHSUSB_BULK device or something in COM ports ... If so, then everything is solved by a similar instruction.Xiaomi Redmi 2 - Official MIUI firmware (OS 4.4.x) Only the firmware for the fastboot download yourDeveloper 5.10.8orStable ROM V7.0.6.0.LXKCNCI -------------------- 4 Xiaomi Redmi 2 | Redmi 4 Prime| Redmi 5 Plus 4/64 |Redmi Note 7 Pro 6/128 Zidoo X9S (2.1.22) |
Message#14 11.10.15, 12:12 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 406 Check in: 17.08.15 Xiaomi Mi 4c Prime Reputation: 36 | Unsubscribe. Can anyone come across a similar one and tell you what to do in this situation? Phone just in the black screen, does not react to anything. There are few owners for Mi4c. By the way .. like var, download Mi PC Suite in the new version, it seems like there is firewood and functionality for flashing and restoring. Posted 10/11/2015 12:12 PM: anton.shumilin, Only the firmware for the fastboot download your Developer 5.10.8 or Stable ROM V7.0.6.0.LXKCNCI in the subject advised .. first put Off. CT version .. and then later on top stitch TWRP and localized. |
Message#15 11.10.15, 12:57 | |
Visitor [offline] Group: Active users Messages 28 Check in: 20.08.13 Xiaomi Redmi 4 Prime Reputation: 3 | See on the PC in the "Device Manager" that a new one appears, it may be a QHSUSB_BULK device or something in COM ports ... If so, then everything can be solved by a similar instruction Xiaomi Redmi 2 - Official firmware MIUI (OS 4.4.x) Only the firmware for the fastboot download your Developer 5.10.8 or Stable ROM V7.0.6.0.LXKCNCI I did everything - it seemed to load ok, but the phone did not turn on after the firmware was completed. I repeated the procedure again from the point of restarting the PC OS in the mode with driver checking disabled. Now, when you try to flash any of the firmware, almost immediately the message "End of file reached. (0x80070026: Receiving hello packet) Tel is defined in the Ports tab as Qualcomm HS-USB QDLoader9008 (COM3) Post has been editedanton.shumilin - 11.10.15, 12:59 |
Message#16 11.10.15, 13:12 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1550 Check in: 08.11.12 Redmi Note 7 Pro 6/128 Reputation: 2425 | anton.shumilin,it may not have waited just, it takes a long time to load after such firmware, for about 5-8 minutes it can ... Okay, now turn off the phone (pull out the battery), plug it in to the pc and turn it on. If it is defined as a COM port, then just run MiFlash, click Refresh and, if a device with a com port appears, then start the batch fileflash_all.bat, which lies in the folder with the firmware .... and wait ... download the phone. -------------------- 4 Xiaomi Redmi 2 | Redmi 4 Prime| Redmi 5 Plus 4/64 |Redmi Note 7 Pro 6/128 Zidoo X9S (2.1.22) |
Message#17 11.10.15, 13:21 | |
Visitor [offline] Group: Active users Messages 28 Check in: 20.08.13 Xiaomi Redmi 4 Prime Reputation: 3 | it may not have waited just, it takes a long time to load after such firmware, for about 5-8 minutes it can ... so nothing absolutely did not happen - the bodies as lay with a black screen, and lay ... how to pull it out? In mi4c, it seems that there is no provision for removing the back cover without surgery, no? And why now MiFlash refuses to upload firmware there? The phone is still defined as COM3 ... |
Message#18 11.10.15, 13:28 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1550 Check in: 08.11.12 Redmi Note 7 Pro 6/128 Reputation: 2425 | In mi4c, it seems that there is no provision for removing the back cover without surgery, no? I did not know that the battery is built in ... Then run the batch file (run as Administrator), the firmware will go with a preliminary cleaning of the partitions, and, in fact, the phone will load clean. -------------------- 4 Xiaomi Redmi 2 | Redmi 4 Prime| Redmi 5 Plus 4/64 |Redmi Note 7 Pro 6/128 Zidoo X9S (2.1.22) |
Message#19 11.10.15, 13:38 | |
Visitor [offline] Group: Active users Messages 28 Check in: 20.08.13 Xiaomi Redmi 4 Prime Reputation: 3 | When you run a batch file on behalf of adm. Nothing happens at all ... Through MiFlash now it seems that I managed to download the firmware, that is, MiFlash itself wrote that everything turned out and everything was good. But the screen as it was extinct, did not rise. That is, the Mi logo does not appear, the download does not happen ... Post has been editedanton.shumilin - 11.10.15, 13:51 |
Message#20 11.10.15, 13:52 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 406 Check in: 17.08.15 Xiaomi Mi 4c Prime Reputation: 36 | [email protected], 12:21 how to pull it out? In mi4c, it seems that there is no provision for removing the back cover without surgery, no? https://www.youtube.com/watch?v=I15VHfeShUwhere's your allowance. I read somewhere ... either by Mi4c or by Mi4i, it was necessary to reset the battery there, it seems you can reach the battery contact without disassembling the whole body .. and not digging far. |
Message#21 11.10.15, 13:53 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1565 Check in: 08.09.13 Reputation: 1164 | anton.shumilin, Here on my ski thereinstruction, apparently flew bout. But to mi4c it will not work. I advise you to search for Qualcomm HS-Usb QDLoader9008 or write to the author of this manual, it may help -------------------- Do not be afraid to make a mistake, you need to be afraid so do nothing. |
mobile version | Now: 06/17/19 09:17 |