We restore our "brick", reflash, after unsuccessful firmware (smartphone all the time in reboot).
For the laid out of stock firmware Thank you
Medved_100500 .
1. Download from the header:
Driver USB VCOM (signed, it works with any version of Windows)
SP Flash Tool
Stock Flash 01002.
2. Install the driver for your system from USB_VCOM_DRIVER_SIGNED.
3. Run Flash_Tool.exe from the unpacked SP Flash Tool archive.
4. In the Scatter-Loading File field, select MT6735M_Android_scatter.txt from Stock_01002.
5. Remove the battery out of the phone, close the lid.
6. In FlashTool click on download.
7. Hold the Vol + and Power on the phone.
8. Connect to the USB port of the computer cable.
9. When the Sound is connected to the computer and in the flashtool, a red band appears, immediately release the buttons, the firmware process will go:
10. The firmware is completed:
Further turn off the phone from the port, insert the battery, turn on. Reboot 2 times, on the second the green robot with the removal icon.
The first time you will load 10-15 minutes.
Post has been editedolegusss - 27.09.15, 11:21Reason for editing: p. 3.8. Section Rules - Picture under the spoiler.