328 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Huawei E5573 (Beeline E5573, Megaphone MR150-3, MTS 8210FT) - Discussion | [mifi] [ltemodem] Discussion of the LTE mobile router Huawei E5573
unlochka
Message#1
30.08.15, 12:56
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2821
Check in: 08.01.13

Reputation:-  616  +

DiscussionHuawei E5573
Discussion | Firmware

Attached Image


Attention!

Modifications
Differences between versions in addition to frequencies.
E5573Bs-320 (Beeline E5573, Megaphone MR150-3)
A photo
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached ImageAttached Image
Specifications
LTE FDD B1 / B3 / B5 / B7 / B8 / B20 (800/850/900/1800/2100/2600)
UMTS 900/2100
GSM 900/1800
DL - 100 Mbps, UL - 50 Mbps
Connect up to 10 devices via Wi-Fi
Management web page IP address 192.168.8.1, default login and password: admin
Antenna connection - TS9
Battery - 1500 mAh
Dimensions: 97x58x13mm
Weight: 76g.

^ SYSCFGEX :( "00", "01", "02", "03", "99") ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (4280000, "GSM850 / GSM1900 / WCDMA BCV "), (3fffffff," All bands ")), (0-2), (0-4), ((800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 " ), (7ffffffffffffffff, "All bands"))

Beeline version E5573Bs-320

Data about the router from the programDC Unlocker:

Modem found: E5573Bs-320
Model: Huawei E5573 (untested)
IMEI: 8674220ХХХХХХХХХХХХ
Serial No .: NUX7XXXXXXXXXXXX
Firmware Version: 21.200.11.01.161
Dashboard version: WEBUI_17.100.08.03.161

Data on the router based on the results of the execution of AT commands:

AT ^ FHVER
^ FHVER: "E5573Bs-320 21.200.11.01.161, CL1E5573SM10 Ver.A"
Ok

ATI
Manufacturer: huawei
Model: E5573Bs-320
Revision: 21.200.11.01.161
IMEI: 8674220ХХХХХХХХХХХХ
+ GCAP: + CGSM, + DS, + ES
Ok

AT ^ DLOADINFO?
swver: 21.200.11.01.161
isover: WEBUI_17.100.08.03.161
webuiver:
product name: E5573Bs-320
dload type: 0
Ok

AT ^ SETPORT?
^ SETPORT: A1; A3
Ok

AT ^ NVRDEX = 50091,0,60
^ NVRDEX: 50091,0,60,01 00 00 00 A1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ok

AT ^ NVRDEX = 50071,0,8
^ NVRDEX: 50071,0,8,01 00 00 00 01 1F DB 14
Ok

AT ^ VERSION?
^ VERSION: BDT: Jul 07 2015, 17:54:13
^ VERSION: EXTS: 21.200.11.01.161
^ VERSION: INTS:
^ VERSION: EXTD: WEBUI_17.100.08.03.161
^ VERSION: INTD:
^ VERSION: EXTH: CL1E5573SM10 Ver.A
^ VERSION: INTH:
^ VERSION: EXTU: E5573Bs-320
^ VERSION: INTU:
^ VERSION: CFG: 1005
^ VERSION: PRL:
^ VERSION: OEM:
^ VERSION: INI: E5573BsCUST-B00C161
Ok

AT ^ SYSCFGEX?
^ SYSCFGEX: "00", 3FFFFFFF, 1,2,7FFFFFFFFFFFFFFF
Ok

AT ^ SYSCFGEX =?
^ SYSCFGEX :( "00", "01", "02", "03", "99") ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (4280000, "GSM850 / GSM1900 / WCDMA BCV "), (3fffffff," All bands ")), (0-2), (0-4), ((800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 " ), (7ffffffffffffffff, "All bands"))
Ok

Megafon version E5573Bs-320

Data about the router from the programDC Unlocker:

Modem found: E5573Bs-320
Model: Huawei E5573
IMEI: 867422022ХХХХХХ
Serial No: NUX7S15C11XXXXXX
Firmware Version: 21.200.15.01.209
Dashboard version: WEBUI_17.100.11.05.209_MRE5

Data on the router based on the results of the execution of AT commands:

AT ^ FHVER
^ FHVER: "E5573Bs-320 21.200.15.01.209, CL1E5573SM10 Ver.A"
Ok

ATI
Manufacturer: huawei
Model: E5573Bs-320
Revision: 21.200.15.01.209
IMEI: 867422022753303
+ GCAP: + CGSM, + DS, + ES
Ok

AT ^ DLOADINFO?
swver: 21.200.15.01.209
isover: WEBUI_17.100.11.05.209_MRE5
webuiver: WEBUI_17.100.11.05.209_MRE5
product name: E5573Bs-320
dload type: 0
Ok

AT ^ SETPORT?
^ SETPORT: A1; A3
Ok

AT ^ NVRDEX = 50091,0,60
^ NVRDEX: 50091,0,60,01 00 00 00 A1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ok

AT ^ NVRDEX = 50071,0,8
^ NVRDEX: 50071,0,8,01 00 00 00 01 1F DB 14
Ok

AT ^ VERSION?
^ VERSION: BDT: Oct 19 2015, 15:18:39
^ VERSION: EXTS: 21.200.15.01.01.209
^ VERSION: INTS: 21.200.15.01.01.209
^ VERSION: EXTD: WEBUI_17.100.11.05.209_MRE5
^ VERSION: INTD: WEBUI_17.100.11.05.209_MRE5
^ VERSION: EXTH: CL1E5573SM10 Ver.A
^ VERSION: INTH: CL1E5573SM10 Ver.A
^ VERSION: EXTU: E5573Bs-320
^ VERSION: INTU: E5573Bs-320
^ VERSION: CFG: 1005
^ VERSION: PRL:
^ VERSION: OEM:
^ VERSION: INI: E5573BsCUST-B00C209
Ok

AT ^ SYSCFGEX?
^ SYSCFGEX: "00", 3FFFFFFF, 1,2,7FFFFFFFFFFFFFFF
Ok

AT ^ SYSCFGEX =?
^ SYSCFGEX :( "00", "01", "02", "03", "99") ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (4280000, "GSM850 / GSM1900 / WCDMA BCV "), (3fffffff," All bands ")), (0-2), (0-4), ((800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 " ), (7ffffffffffffffff, "All bands"))
Ok
Useful
Drivershere
11.02.2017 - NEW METHOD REVERSE
Instruction (user manual)

How to fix the replaced IMEI so that it is not dropped onto the native
Unlock codes no! But there isA method that allows you to unlock a router from Beeline through a flashing
In the archive, two firmware 1_ transition to unlock, after its installation unlock AT-command
AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0 and after that 2_ working firmware is installed.Attached fileE5573Bs-320_unlock.rar(52.91 MB)
Non-operator web interfaceAttached fileUpdate_WEBUI_17.100.09.01.03_Rndis_V7R2_9x25_V7R11_CPIO.exe(29.08 MB)
Changed version of the WEB interface Update_WEBUI_17.100.09.01.03_Rndis_V7R2_9x25_V7R11_CPIO

The router from Megafon is broken only after its disassemblyusing the "needle method"Receipt of the OEM code and unlock code (SIMLOCK) while maintaining the factory firmware Megaphone
Flash code for flashingany calculator. For the purposes of unlocking the router, the unlock codes for the calculator are not applicable to this router - all you need is a Flash code that the flash driver requests.
Reanimation after unsuccessful firmware
Disaster recovery router firmware ("needle method")
Access to AT commands, DATALOCK and receipt of OEM code
Getting access to the Linux console and installing ADB
Manual Dump router firmware
Save Webmorda router and restore it back
Re-installing (and at the same time unlocking) the MR-150-3_Megafon router by uploading a secure bootloader file through a special router boot port (aka needle method) using Huawei Flescher
Displays phone number in dashboard or webmord
Where are the WiFi antennas and what is responsible for what
The working circuit is an electrical circuit that implements the operation of the device only from a 5V power supply using a “cord” without a battery.
The program for measuring the signal level E5573 (great for tuning the antenna).
Run without battery
Run without battery for dummies
Installing DNS servers sent by the modem via DHCP
What would not turn off WiFi
Script to put the router into Debug_mode or Switch_mode mode
Debug_mode is the working mode of the router, when, in addition to the router's network card available in Windows, 6 more ports are added with the names FC - .... and Switch_mode is a mode with two boot ports, the router's network card is disabled and access to the router by IP address is absent, as well as it is impossible in this mode to access the Internet
Script to put the router into Debug_mode or Switch_mode mode

E5573s-156 (MTS 8210FT)
A photo
Attached Image

Attached Image

Attached Image

Attached Image

Specifications
Supports frequency:
4G - LTE FDD B1 / B3 / B5 / B7 / B8 / B20 (800/850/900/1800/2100/2600)
4G - LTE TDD B38 (2600)
3G-UMTS 900/2100
2G - GSM 900/1800
Wi-Fi: IEEE 802.11a / b / g / n
Wireless connection
Wi-Fi
in LTE networks data download speed up to 150Mbps
LTE data transfer rate up to 50Mbps
in 3G networks using DC-HSPA + data download speed up to 42 Mbit / s
in 3G networks using HSUPA technology data transfer rate up to 5.76 Mbit / s
Wi-Fi 802.11a / b / g / n standard
2.4 GHz, 5 GHz wireless connection frequency
Security
Encryption Support WEP, WPA, WPA2
At the same time can distribute Internet via Wi-Fi technology to 10 users.
Management web page IP address 192.168.8.1, default login and password: admin
Connector for TS9 external antenna
Micro USB connector
Battery Capacity - 1500mAh
Operating Systems
Windows XP, Windows Vista, Windows 7, Win 8, MAC OS X 10.5, 10.6 and 10.7
Height is 96.8 mm
Width 58 mm
Thickness 12.8 mm
Weight 76 g

^ SYSCFGEX :( "00", "01", "02", "03", "99"), ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVII I / WCDMA BCI"), (4-80000, "GSM850 / GSM1900 / WCDMA BCV / WCDMA BCII "), (3fffffff," All ban ds ")), (0-2), (0-4), ((20000800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 / LTE BC38 "), (7fffffffffffffffff," All bands "))

MTS version E5573s-156

Data about the router from the programDC Unlocker:

Modem found: E5573s-156
Model: Huawei E5573
IMEI: 8669580ХХХХХХХХ
Serial No .: N3Y7S159ХХХХХХХХХХ
Firmware version: 21.200.07.01.143
Dashboard Version: WEBUI_17.100.09.03.143

Data on the router based on the results of the execution of AT commands:

AT ^ FHVER
^ FHVER: "E5573S-156 21.200.07.01.143, CL1E5573SM Ver.A"
Ok

ATI
Manufacturer: huawei
Model: E5573s-156
Revision: 21.200.07.01.143
IMEI: 8669580ХХХХХХХХ
+ GCAP: + CGSM, + DS, + ES
Ok

AT ^ DLOADINFO?
swver: 21.200.07.01.143
isover: WEBUI_17.100.09.03.143
webuiver:
product name: E5573s-156
dload type: 0
Ok

AT ^ SETPORT?
^ SETPORT: A1; A3
Ok

AT ^ NVRDEX = 50091,0,60
^ NVRDEX: 50091,0,60,01 00 00 00 A1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ok

AT ^ NVRDEX = 50071,0,8
^ NVRDEX: 50071,0,8,01 00 00 00 01 1F DB 14
Ok

AT ^ VERSION?
^ VERSION: BDT: Jul 16 2015, 14:03:44
^ VERSION: EXTS: 21.200.07.01.143
^ VERSION: INTS:
^ VERSION: EXTD: WEBUI_17.100.09.03.143
^ VERSION: INTD:
^ VERSION: EXTH: CL1E5573SM Ver.A
^ VERSION: INTH:
^ VERSION: EXTU: E5573s-156
^ VERSION: INTU:
^ VERSION: CFG: 1005
^ VERSION: PRL:
^ VERSION: OEM:
^ VERSION: INI: E5573sCUST-B01C143
Ok

AT ^ SYSCFGEX?
^ SYSCFGEX: "00", 3FFFFFFF, 1,2,7FFFFFFFFFFFFFFF
Ok

AT ^ SYSCFGEX =?
^ SYSCFGEX :( "00", "01", "02", "03", "99"), ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (4-80000, "GSM850 / GSM1900 / WCDMA BCV / WCDMA BCII "), (3fffffff," All bands ")), (0-2), (0-4), ((20000800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 / LTE BC38 "), (7fffffffffffffffff," All bands "))
Ok
Useful
Flash code for flashingany calculator. For the purposes of unlocking the router, the unlock codes for the calculator are not applicable to this router - all you need is a Flash code that the flash driver requests.
Unlock and count code of the OEM modem MTS 8210FT (E5573s-156)
Disaster recovery router firmware ("needle method")
Getting access to the Linux console and installing ADB
Save the web interface of the router and restore it back.
Manual on the firmware dump of the router.
Displays phone number in dashboard or webmord
Where are the WiFi antennas and what is responsible for what
The working circuit is an electrical circuit that implements the operation of the device only from a 5V power supply using a “cord” without a battery.
The program for measuring the signal level E5573 (great for tuning the antenna).
Run without battery
Script to put the router into Debug_mode or Switch_mode mode
Debug_mode is the working mode of the router, when, in addition to the router's network card available in Windows, 6 more ports are added with the names FC - .... and Switch_mode is a mode with two boot ports, the router's network card is disabled and access to the router by IP address is absent, as well as it is impossible in this mode to access the Internet
Script to put the router into Debug_mode or Switch_mode mode

E5573s-320 (MTS 8210F)
Specifications
^ SYSCFGEX :( "00", "01", "02", "03", "99"), ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (4280000, "GSM850 / GSM1900 / WCDMA BCV "), (3fffffff," All bands ")), (0-2), (0-4), ((800d5," LTE BC1 / LTE BC3 / LTE BC5 / LTE BC7 / LTE BC8 / LTE BC20 " ), (7fffffffffffffffff, "All bands")) OK

Transition firmware(necessary for unlocking, look at the algorithm under the spoilers of other models above, everything is done in the same way here)
Working firmware
Modified firmware(do not confuse model)

E5573Cs-322(Huawei, MTS 8214F)
Instructions

Useful


Post has been editedAndrewP_1 - 11.09.18, 16:27
Reason for editing: Redesigning the header, executed by aleksgrayvoron
hentrs
Message#42
03.09.15, 00:08
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6110
Check in: 12.08.13

Reputation:-  555  +

I do not really understand these matters

well then it is difficult o.O
then take your time.
the crap is that often the ports need to be locked in front of, and only then stick in yusb.
Yusb "history" ideally show under Windows such programs as USBlyzer and USBDeview.


--------------------
<<-- Born in USSR -->>
-----------------------------------

�� ����� ��� ������ ������� !!! -> � ������ ������ ?!!! download

hentrs
Message#43
03.09.15, 02:57
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6110
Check in: 12.08.13

Reputation:-  555    +

by the way, some router ports are assigned 1 time from a heap of connections

by the way, interesting.
I think, perhaps the routers are not killed directly.
Once the search is in progress, there is an "unknown" device in the device manager.
need to see and show the view-id here.
pbl is probably alive and a flash drive too.
as it is now not to lose the native flash drive, although there is little chance.


--------------------
<<-- Born in USSR -->>
-----------------------------------
Yesterday you were the master of the Empire !!! ->And now an orphan? !!!
rust3028
Message#44
03.09.15, 08:52
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120    +

Hentrs @ 09/02/2015, 23:45*
hang the contacts to the ground through a resistor (resistance) any.

Not any, and Om 100-200.

Well, it is advisable to pre-exclude contact with +5 V (powered by USB).

Post has been editedrust3028 - 03.09.15, 08:57
unlochka
Message#45
03.09.15, 09:36
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2821
Check in: 08.01.13

Reputation:-  616  +

Hentrs @ 09/03/2015 02:57*
Once the search is in progress, there is an "unknown" device in the device manager.
need to see and show the view-id here.


Attached Image

Attached Image
rust3028
Message#46
03.09.15, 10:47
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

What do you think?

Most likely, among these five contacts, you need to look for a "magic point".
By analogy with other modems, it can be assumed that the remaining contacts are +5 V, GND, RX, TX.
rust3028
Message#47
03.09.15, 11:37
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

Hentrs @ 09/02/2015, 23:23*
find and patched usbloader

Why look for him? I asked forth32 patch - done.
M0DDer
Message#48
04.09.15, 13:10
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.02.08

Reputation:-  2  +

Not understood. Is the firmware method checked?

Lay out please
E5573Bs-320TCPU-V200R001B110D99SP01C00_general_05021SQX.zip
E5573Bs-320TCPU-V200R001B200D07SP00C00_null_null_null_null_05012TXY.zip
E5573BsWEBUI-V100R007B100D09SP01C03_null_null_null_null_05012TYA.zip

ps Order for 950rub. Kostroma.

Post has been editedM0DDer - 04.09.15, 13:32
rust3028
Message#49
04.09.15, 13:48
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

* M0DDer
Firmware - in the cap (which is not quite a cap - not fixed).
And I already gave the link to WEBUIhere.
hentrs
Message#50
05.09.15, 06:05
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6110
Check in: 12.08.13

Reputation:-  555  +

rust3028 @ 09/03/2015 11:37*
Why look for him? I asked forth32 patch - done.

And where?
rust3028 @ 09/03/2015 08:52*
Ohms per 100-200

Well, I think, to megaoma, any.
for 100-200 ohms, x. You will find such a resistor just like that.
and it is also interesting, what is the limit of the response to resistance?

Posted 09/05/2015 06:05:

M0DDer @ 09/04/2015, 13:10*
ps Order for 950rub. Kostroma.

What ordered for such nemerenny loot?
router?
you were lucky ...: D


--------------------
<<-- Born in USSR -->>
-----------------------------------
Yesterday you were the master of the Empire !!! ->And now an orphan? !!!
rust3028
Message#51
05.09.15, 09:08
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120    +

And where?

Lay out when the "magic point" will be found.
kkk4
Message#52
05.09.15, 13:07
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 606
Check in: 16.01.09
Apple iPhone SE

Reputation:-  145  +

Well, I think, to megaoma, any.

There usually to "plus" pull up resistors of the order of 5 kOhm. To "throw" to zero, you need a resistance not higher ...
Therefore, who has "all bad with resistors" - the method with pencil lead will not work. There is only one option - incandescent lamp 40-60W. There is just 100-80 Ohm resistance to cold. The method is not just rescued in the garage conditions and the presence of a desk lamp :)
P.S: 5 Gigahertz on Wi-Fi who managed to include in the webmord? What is funny - in the description for the firmware for this model it is. Not otherwise - "by order of Beeline" made, as with the MF90 +. There are places for the transmitter, but they were not sealed, as were the antennas ... "5 old women are already a ruble" :)


--------------------
iPhone 5s (12.1), iPhone SE (10.3.1), Nokia 435 WP 8.1, iPad mini4 9.3.5, iPad Pro 9.7 "9.3.5, Le2 x527, Mlais M4Note
M0DDer
Message#53
07.09.15, 14:39
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.02.08

Reputation:-  2  +

What ordered for such nemerenny loot?
router?
you were lucky ...: D

Well yes.
https: //kostroma.beeli...in-huawei-e5573-black/

I will try to reflash
M0DDer
Message#54
08.09.15, 11:31
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.02.08

Reputation:-  2  +

Thank you, I reflash, unblock, sim megaphone earned, everything is OK!

The muzzle works and is native (without SMS), but the Huaveevskaya E5573Bs_WEBUI_17.100.09.01.03 is an order of magnitude better .. a wi-fi repeater appeared (as a network client), we earned SMS, but there is no USSD.

The connection is very good, where MF823 (with two 10cm antennas) caught a maximum of 1 stick, E5573 (with two 10cm antennas) catches for a maximum or so.

The modem transferred to the flashing mode via sw_mode_E3372_new.rar
True, the driver had to be manually selected. (There were problems on Windows x64, the driver was launched on x86 without problems)

AT commands entered through dc-unlocker_client-1.00.1201.exe

On web login password admin admin

And without installing standard drivers from the built-in CD-ROM beeline, RNDIS itself is not detected.

I put Huawei HiLink on the mobile through the market.
rust3028
Message#55
08.09.15, 11:50
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

M0DDer @ 09/08/2015, 11:31*
The modem transferred to the flashing mode via sw_mode_E3372_new.rar

sw_mode_E3372 is more needed for opening ports on a working firmware to enter AT commands.
And when flashing it is possible to do without it.
M0DDer
Message#56
08.09.15, 11:56
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.02.08

Reputation:-  2  +

rust3028 @ 09/08/2015 11:50*
sw_mode_E3372 is more needed for opening ports on a working firmware to enter AT commands.
And when flashing it is possible to do without it.

Yes, he did not detect the port for flashing

HUAWEI Mobile Connect - Bus Enumerate Device and if you use + Remote NDIS based Internet Sharing Device from the CD-ROM
And FC - Application Interface and FC - PC UI Interface only if translated via sw_mode_E3372

On x64 it was not possible even to enter the face .... not to mention the ports

Well, or I have not yet spotted

More questions:
USSD or how to use? Needed to check the balance and sometimes enable Internet roaming USSD team
RNDIS to automatically turn on without biline cd-rom (as on MF823)
And in general this cd-rom would be disabled

Post has been editedM0DDer - 08.09.15, 12:12
rust3028
Message#57
08.09.15, 12:03
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

* M0DDer
One thing I can say is that the flash driver can switch the device from RNDIS mode to port mode.

Post has been editedrust3028 - 08.09.15, 12:18
M0DDer
Message#58
08.09.15, 12:13
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.02.08

Reputation:-  2  +

It is by default not in RNIS, not in ports one composite and Bus Enumerate Device and that's it.
RNIS from disk
Ports with sw_mode
rust3028
Message#59
08.09.15, 12:22
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

rust3028 @ 09/08/2015, 12:03*
firmware can switch itself

By the word "firmware" I meant the flasher. It does the same thing as sw_project_mode.cmd.
soccer87
Message#60
08.09.15, 13:39
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 301
Check in: 10.06.07
Xiaomi Redmi Note 4 3/32

Reputation:-  15  +

What do you think will be the possibility of changing IMEI? I want to buy for iota.
rust3028
Message#61
08.09.15, 13:43
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

soccer87 @ 09/08/2015, 13:39*
in the future will be the possibility of changing IMEI? I want to buy for iota.

BUThere(under the spoiler) what?
Huawei
 

328 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19 13:42