[X]Assistant

[LOWRIDER333]

DiscussionZTE Axon Mini
ZTE Axon Mini
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

Class: flagship
Form factor: monoblock
Body Material: Aviation Aluminum
Operating system: Android 5.1.1 + own shell
Network: two SIM cards, one radio module, GSM / EDGE, WCDMA, LTE (SIM / microSIM) supported
Platform: Qualcomm Snapdragon 615
Processor: eight-core 1.5 GHz
RAM: 3 GB
Memory for data storage: 32 GB, slot for microSD memory card (128 GB cards are supported)
Interfaces: Wi-Fi (a / b / g / n | ac), dual-band, Bluetooth 4.0 (A2DP, EDR), microUSB (USB 2.0) connector for charge / sync, 3.5 mm for headset, fingerprint sensor
Screen: 5.2 ’’, capacitive, SuperAMOLED matrix, 1920x1080 pixels (FHD), 2.5D glass, automatic backlight level adjustment, oleophobic coating
Camera: 13 MP, 1080p video recording (1920x1080 pixels), LED flash
Front camera: 8 MP
Navigation: GPS / Glonass (support A-GPS)
Sensors: accelerometer, position sensor in space,
gyroscope, light sensor
Battery: non-removable, with a capacity of 2800 mAh
Dimensions: 145.3 x 70 x 7.9 mm
Weight: 132 grams

Reviews and Reviews

Review onsavagemessiahzine.com
Review on mobile-review.com
Review on overclockers.ru
Review on hi-tech.mail.ru
Review on cnews.ru
Review on raxxl.com

Useful

Mirror on the YaDisk with firmware
Firmware for zte 2015 c Russian (Android 5.1.1)
CyanogenMod 13.0
How to make b2015 as close as possible to b2016
TWRP recovery (updateable)
Setting superuser rights and TWRP recovery
Modified stock firmware for B2015 / B2016
MIUI 8 v7.3.23
Kali Linux NetHunter ZTE Axon mini B2015 / B2016Android 5.x.x, Lollipop, Mifavor v3.2
Reset Google account (FRP) on b2016
Russification firmware B14
Russification without lace
Brick Rebuild with MEDUSA JTAG PRO via USB

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedvelikashkin - 06.03.19, 08:27

Reason for editing: Rebuilding bricks with MEDUSA JTAG PRO via USB

[Pro100Sata]

neroni,[center]
Aah I have a rekvesi stock ... and the firmware is not stock ... now I can not flash it ...

[neroni]

And with the stock does not work?

[zkauba]

Hello! Model B2016, when you try to turn on, the vibrik works, the ZTE logo appears, the inscription below is "powered by android" and everything, after a few seconds, the cycle repeats and so endlessly. He took off the back cover, recharged the battery in the source (not drowned), nothing has changed. I can not go into the recovery, when I press the volume + and on. MiFavor appears after the splash screen and reboots again cyclically (MiFavor appears every time). When set to charge after a couple of reboots, it hangs on the ZTE screensaver, and this happens even when the battery is turned off. Has anyone come across a similar, dear? What is it - a flash at the device with a copper basin covered with something else?

[sana6904]

zkauba, It is not clear, any manipulations were made? (Firmware, etc. what kind of recovery stood.) Tel. completely included? (Clamp the power, after the third vibro release, the body is turned off.)

[zkauba]

Sana6904 @ 07.02.19, 02:27

It is not clear, what kind of manipulations were made? (Firmware, etc. what kind of recovery stood.) Tel. completely included? (Clamp the power, after the third vibro release, the body is turned off.)

There were no manipulations, stock recovery, firmware also drain. It worked normally for two years, then it happened ... Even if the firmware flashed, it must enter the recovery ... The phone completely disconnected by pressing the button on, trying to enter the recovery did not give anything after that, checked after disconnecting as if the battery had been reconnected and without. Nothing changes, a cyclic reboot continues with the vibric trigger at the beginning ...

It also turned out that the device froze twice on the street in the pocket before disconnecting. After the second time, a cyclic reboot started when turned on.

Post has been editedzkauba - 07.02.19, 08:22

[sana6904]

[b] zkauba [/ b. Thank! Now everything is detailed. In this case, I think to give in for repair. By itself, no one in this branch could restore a brick. Such a case as you have on the forum can not remember. My memory died on lenovo, but it was loaded in recovery, it just gave an error when flashing.

[neroni]

[email protected], 14:55

shashok2Stock + Rut.

I do not have stock and root and through ACR

[aga75]

[email protected], 22:04

Can anyone advise a program to record calls, tried a bunch of programs. none work (Call_Recorder .ACR)

So the firmware embedded recorded there

[ilnaz93.93]

that there is no news about any new slick rom from any device

[vkomesar]

Tell me what is now the android is official and not official (firmware) on this phone?

[MishaChehov]

vkomesar
All in a hat a young man

[Vlaaaad]

Brick Rebuild with MEDUSA JTAG PRO via USB

Logs

Welcome to Octoplus Pro JTAG Software version 1.7.3. Started. Reader # 0: Generic EMV Smartcard Reader 0 Model Settings: Interface: USB Core: Qualcomm MSM8939 Loader: QLoader_v1 Connecting ... Sending loader ... OK. Loader successfully initialized. Device: CoreID_0090B0E1 Core: Qualcomm MSM8939 Page size: 512 B Block size: 512 B Block count: 61071360 Size: 29.12 GB (29820.00 MB) Connect successful. -------------------------------------------------- ------------- SW: 1.7.3; Fw: P00: GPT (00000000, 00020000) 64 MB P01: modem (00020000, 00028000) 80 MB P02: fsc (00060000, 00000002) 1024 b P03: ssd (00060002, 00000010) 8 KB P04: DDR (00080000, 00000040) 32 KB P05: sbl1 (000A0000, 00000400) 512 KB P06: rpm (000A0400, 00000400) 512 KB P07: tz (000A0800, 00000400) 512 KB P08: hyp (000A0C00, 00000400) 512 KB P09: sec (000C0000, 00000020) 16 KB P10: fsg (000C0020, 00000C00) 1536 KB P11: modemst1 (000E0000, 00000C00) 1536 KB P12: modemst2 (000E0C00, 00000C00) 1536 KB P13: aboot (00100000, 00000800) 1024 KB P14: boot (00100800, 00014000000) P15: recovery (00114800, 00014000) 40 MB P16: devinfo (00128800, 00000800) 1024 KB P17: system (00129000, 00600000) 3072 MB P18: cache (00740000, 00096000) 300 MB P19: persist (007D6000, 00010000) 32 MB P20: misc (007E6000, 00000800) 1024 KB P21: keystore (007E6800, 00000400) 512 KB P22: config (007E6C00, 00000400) 512 KB P23: oem (007E7000, 00020000) 64 MB P24: splash (00807000, 0000A000) 20 MB P25: logs (00811000, 00040000) 128 MB P26: userdata (00860000, 031DDFDF) 24.93 GB Selected file: F: / _ FlashTMP / FIRMWARES / ZTE / AxonMini2016 / zte b2016 dump good root without userdata / rawprogram0.xml. Backuping. Please wait ... Reading partition modemst1 ... Done. Reading partition modemst2 ... Done. Backuping finished. #grenWriting Please wait ... Write data verification is enabled. Writing partition recovery ... Done. Writing finished. SW: 1.7.3; Fw: Disconnected.

Pictures

Restored the native Recovery from Backup`a and flashed the stock
If you need someone, I can help remotely;)

Post has been editedvelikashkin - 06.03.19, 08:27

Reason for editing: In the header

[Lenis Ilya]

Hello! Can I give you detailed instructions? Please. I need the phone urgently ((

Posted 05/03/2019 at 21:24:

Vlaaaad
Hello! Can I give you detailed instructions? Please. I need the phone urgently ((

[smartlinux]

Vlaaaad
upload files from the folder with dump / firmware here that are similar to these:

crclist.txt elf_path.txt gpt_backup0.bin gpt_both0.bin gpt_main0.bin partition.xml patch0.xml prog_emmc_firehose_8939.mbn rawprogram0.xml sparsecrclist.txt

.
With their help, it will be possible to restore free software - such as QFIL, MiFlash, etc. For buying a jellyfish, which costs more than the smartphone itself, is impractical.

[Vlaaaad]

smartlinuxI took all the files from the backup in the subject. Medusa does not need to buy, I can help remotely.

[Bytefun]

I am looking for backup of all sections for TWRP.
Accidentally screwed up the sections by writing the firmware from another TA.
Out of the bootlap, for now a new problem: D