2. VERY NOT CONVENIENT STANDARD FIRMWARE. I WANT A CAST, BUT DELIVERY TO ME IS NOT POSSIBLE, BECAUSE I DON'T UNDERSTAND ANYTHING IN THIS. I AM NO KGB KEEPER NOR SOOFSNIK AND FBI. GIVE SOMEONE CAST TO I FILL IT AND JUST ALL WORKED.
Does this AI Mac make you caps?
Are you sure you made the right choice when buying a device that is not officially supported in Russia?
1. Preparation
A) Register on Xiaomi:
http://account.xiaomi.com/B) Download the archive
https://yadi.sk/d/s9GZRQ6_gxxkM(in the archive firmware Miwifi and PandoraBox relevant on 06/09/2015, programs for controlling the router from the phone and computer under the stock firmware, programs under windows for manipulating ssh)
B) install the application from the archive on the phone, tablet;
D) install WinSCP and copy Putty
2. Install the developer firmware:
2.1. Download miwifi.bin and copy it to a USB flash drive (FAT32); if you downloaded a new firmware from a site, then we rename it to miwifi.bin
2.2. Turning off the power of the router
2.3. We insert the USB flash drive, we clamp the reset, with something thin;
2.4. Turn on the router, wait until the light flashes in front, release the reset, if the red light is on: a) the firmware is not correct, b) the flash drive is not correctly selected (preferably up to 4GB));
2.5. Rest until the blue light comes on;
You can also install via the web interface.
3. Establish a Wifi connection;
4. Go to the MiWiFi application (use the data from the Xiaomi account);
5. We bind the router to the account;
6. Go to
http://d.miwifi.com/rom/sshuse login / password for Xiaomi;
7. Download miwifi_ssh and write the password (root еЇ†з Ѓ password);
8. Copy miwifi_ssh to the USB flash drive and p. 2.3.-2.5 (removing or renaming miwifi)
9. On the computer, open WinSCP and configure the connection:
9.1. SCP transmission protocol;
9.2. Host Name: 192.168.31.1;
9.3. Root username;
9.4. Password: Password obtained in paragraph 7;
9.5. Save (do not touch anything else);
10. It will give a warning, agree, a window will open with the contents of the router (or a table depending on what you chose during installation);
11. Pandora file or the latest
http: //downloads.openw...aomi-Mini-R1CM/stable/Copy to the tmp folder on the router (I recommend renaming it to something shorter. bin, for example, Panda.bin or p.bin;
12. Run Putty (installation is not required);
12.1. Host name 192.168.31.1;
12.2. Open;
13. Enter: root
14. Enter the Password received in section 7 (the characters are not displayed, simply poke the buttons in the desired order and press Enter or copy and paste - press the right mouse button (insert) and enter);
15. Flash Pandora with mtd -r write /tmp/Pandora.bin OS1
16. We wait until the router is loaded for about 5 -10 minutes (the blue light comes on) (the ssh connection will fall off)
17. Clean the browser cache
17. Go to the web interface 192.168.1.1. Login root Password admin
Everything, Pandora is installed
In order to at least understand something we are looking for hieroglyphs
In the left column
there is 3 tab and instead of chinese you can choose Anglicon language, which is native and familiar from childhood
Further optional
can russify
For this, read the header about the Russification and installation of packages
Post has been editedWolfling83 - 14.07.15, 23:43Reason for editing: Fixed ochepyatki