Translated stable firmware V6.7.11.0 for Redmi Note 2 miuisu_v5.0.2_hermes_V6.7.11.0.LHMCNCH_mssff.zip (Russian and Ukrainian)
Odeksirovana firmware (not deodeksirovalas - The Code is factory).
As close as possible to the drain of the installed patches only in T9 dialer (Russian and Ukrainian) and services (deleted MiMarket, can be removed and Updater)
Root is not installed.
gapps installed (Play Market and services - the latest version).
The Google LatinIME keyboard and the MiPult infrared app are installed.
Translation from MIUI.SU (Russian and Ukrainian) was kindly provided by DriffeX.
Downloadmiuisu_v5.0.2_hermes_V6.7.11.0.LHMCNCH_mssff.zip708 MB (743,278,333 bytes)
Patches and firmware install via TWRP.

Once again convinced of the "stability" stabilok, and it is in this - the vibration as in 5.10.8 :)

Post has been edited666999666 - 17.10.15, 09:50

In general, I decided to write a response to one of the most pressing issues:

If the call does not display the caller's name from the phone book and a number:

1. Rooms in the phone book dozhny be written in the international format, for example 7 or 38 (your country code), but not with 8 or 0. This is the most common mistake.
2. You have the same number recorded by different users.
3. The number is recorded on the SIM card.
4. In the dialer settings or contacts in the filter is not selected contacts storage with your number.
5. And the last hit from the Beeline, they often Unknown number in walking and outgoing calls.

If that still remember - added post.



Post has been editeddevserg - 28.10.15, 20:06

Patch for the CPU frequency when the screen is touched

Chinese in the firmware originally made it so that when you touch the screen anywhere processor is switched to maximum frequency and mercilessly eats battery. Patch processor corrects the frequency to the touch. Subjectively, it does not affect the phone's responsiveness. But reduces battery Jordania.
Corrections are made in /system/etc/perfservscntbl.txt
It is made only through a custom rekaveri (TWRP). Works with all known firmware MIUI6, MIUI7

Download:
Patch_v1 (when touched on the core 2 includes 1183MGts):
touchfreq1183.zip(144.38 KB)

Patch_v2 (when touching turns on one core 806MGts):
touchfreq806.zip(144.39 KB)

Patch_v3 (frequency increase when touching off):
touchfreq403.zip(144.39 KB)


P.S. Android If deemed necessary, the processor frequency is higher than these values
P.P.S. The latest firmware versions this bug has already been fixed



Post has been editedChed666 - 11.11.15, 14:30

Maximum Frequency Cores

Universal modification script to nuclei
The script is suitable for all piercings (and most likely to other phones based on the MTK6795)
To create a patch under the update.zip rekaveri need to have theJava. Without it creates only the bare boot-patched.img

Options to choose from:
1. Limiting the maximum frequency of the processor for better autonomy
2. Limit the maximum number of processor cores working for a better autonomy
3. Limiting the maximum videoyader frequency for better autonomy
4. Tweek Memory Killer for better multitasking - to change values ​​on 2048,3072,6144,15360,17920,20480 (equivalent 8,12,24,60,70,80 MB)
5. Changing SELinux Mode for Permissive for programs such ViperFX and Paragon NTFS & HFS +
6. Change the TTL to 63 for distribution on the Internet yota
7. Adding init.d support to run custom scripts in /etc/init.d folder

Instruction:
1. Unpack the archive script_v3.zip, the resulting script folder is copied from the boot.img its firmware
2. Run start.cmd and answer the questions of the program
3. sews the resulting file update.zip from TWRP rekaveri or boot-patched.img with PC
script_v3.zip(4.03 MB)






It is also recommended to installthis patch



Post has been editedChed666 - 13.01.16, 22:54

I added a small video in the post (maybe someone will be interested):
Russification TWRP 2.8.7.0
Many screenshots:


Post has been editedferhad.necef - 17.10.15, 20:36

Since no frills theme, I write here. Applicable on any firmware. An application that rounds off the edges of the screen, before it was a trick miui. While wsm not working 7.
Who missed, please. Do not forget to add to the startup.
Lime rounding



Post has been editeddevserg - 03.11.15, 13:05

The easiest way to recover from scratch or install TWRP, flash it through
Flashify (for root users)(Set flashify / run program / grant Root / push recovery image / choose a file / select recovery.img / agree to reboot / get into TWRP) ...
Just do not archive, and the recovery.imghttps://cloud.mail.ru/public/24tt/dyvjyXXGg
It is desirable that recovery.img lying in the phone memory is fundamentally ...



Post has been editeddevserg - 28.10.15, 20:12

In a personal talk with him, I knew he could not change the firmware after upgrading to 10/5/15.
For beginners to write, if you upgraded to 5.10.15 and suddenly want to roll back to an older version of firmware for them it will not make a simple manner.
You will need to:
1. Install TWRP through Flash Tool(From version 5.10.15 through native rekaveri no longer install TWRP).
2. Prepared archive firmwarecleaned by native rekaveri.
3. Harvested firmware file to put on the memory card or the phone memory.
4. Sew on the phoneof this instruction
After such manipulations can bet any firmware p.2,3,4 enough.



Post has been editeddevserg - 28.10.15, 20:17

Oleksiy316,
sxeMonster,

Who patch message in the list of wifi - "nvram warning err 0x10 .." method of caps and was not working wifi 5GHz has the solution:
https: //drive.google.c...1LWmdJN2EzLXBfMUU/view
Or
info.ankuch.mt6752_5ghz_enable.apk(26.1 KB)

info.ankuch.mt6752_5ghz_enable.apk oprelennye utility replaces the bytes in the nvram wifi.
The program requires Root.
Moderator pliz add to his cap.

Post has been editedvvsprog - 19.10.15, 20:26

Because the instructions written by all and sundry, and cap are added without checking.

You just need to decide before the firmware that you want to process on the firmware - update and save changes or install a clean firmware.

Again, all wipes are to do only to, but not after flashing.

And so, let's be clear:

1. If you want to insert an empty firmware without saving the data, then you need to do and Wipe Cache Wipe Data (aka Factory Reset) before flashing. Wipe Dalvik Cache do not need to, because it is located in the Data and erased when the Wipe Data.

2. If you want to upgrade with preservation of all data before firmware you have to do only and Wipe Cache Wipe Dalvik Cache. Do they must be in order to avoid glitches.
Wipe Data do not need, since this would entail the loss of all your data.



Add to the cap.

Post has been editedfrost_ua - 19.10.15, 22:29

Pysy. Attention! Helpful information!
If you made a backup in rekaveri and want to restore (restore), is better to remove a tick from the boot and nvram. Frequent flashing harmful to their phone. A full restore of all ticks do only if flied imei, or other serious problems (heated, off, etc ...).

Translated firmware for the Redmi Note 2 MIUI.SU miuisu_v5.0.2_hermes_5.10.22_mssff (Russian and Ukrainian) .
Firmware odeksirovana (deodeksirovalas partly for patches) - fast.
Radio works SMS come.
As close as possible to the drain of the installed patches only in T9 dialer (Russian and Ukrainian) Security Center (so only once asked about Ruth), recording on an external SD-card enabled.
MiMarket removed and added the ability to remove Updater-a.
Including resolution recording on SD-card applications.
gapps installed (Play Market and services - the latest version).
Factory rekaveri of firmware deleted, as well as its mechanism of self-healing.
The Google LatinIME keyboard and the MiPult infrared app are installed.
Translation from MIUI.SU (Russian and Ukrainian) was kindly provided byDriffex.
Downloadmiuisu_v5.0.2_hermes_5.10.22_mssff.zip738 MB (773,976,012 bytes) MD5: 9B6249904839E30E51B6733F0D2952A7

Patches and firmware install via TWRP.
In view of the transition Xiaomei to the private key to sign the firmware via custom bikes zavodki rekaveri not installed.
For normal operation of the firmware, it is strongly recommended to make a factory reset after installation (wipe data / wipe cache)
When you upgrade enough wipe cache / dalvik-cache

P.S. Finally repaired formation flying titles SIM cards when you reboot and corrected loss of GPS satellites.
If it is not loaded data into the application threads (when updating from previous firmware wipe does not) make the settings-all application data Clear-Threads



Post has been editedmasslakoff - 24.10.15, 08:59

Correction GPS works on firmware 5.10.15 or higher (before GPS worked fine, the last insertions observed satellites dumps).



Here's Patch replaces only libmnl.so, sew through twrp. Wipes are not needed.



Thank you to those who have unsubscribed GPS. And so, someone tripped replacement libmnl.so, after applying the patch, someone left an unstable job. I also tested it on two phones at fdd was all excellent, really friezes on the td (and firmware is the same).
Did not understand what was wrong will melt in the system, but simply
Made universal patch to replace all the files responsible for GPS, on any firmware (firmware files are taken from 05.09.24).
Fix_GPS_XRN2_FULL_SuperDuse.zip(2.23 MB)



Mirror on the cloudhttps://cloud.mail.ru/public/6WuG/b4MGVHGUw



Post has been editeddevserg - 28.10.15, 20:22

Yesterday, there was nothing, and had no access to BB, and would like to upgrade. To replace spent rekaveri 7 minutes (including downloading).

EVERYTHING YOU DO, YOU DO AT YOUR OWN RISK



Post has been editeddevserg - 24.10.15, 16:29

who have problems with the activation, I did so, not quite in detail, I do not remember that there was: poke in the message, it attempts to activate, wait, can not again, poking again proposes a number entered in the international format, ie. e. 7 xxx xxx xxxx, and activates all
Upgrade the firmware 3 times, nothing else pops
with money I do not have it and Tele2 iota in Veliky Novgorod, would like you - I can not guarantee to remove some

Post has been editedsDemonik - 24.10.15, 19:44

Hello everyone, I decided for myself the problem of deep sleep on miuipro 5.10.22, by adding a single line to build. Specifically pm.sleep.mode = 0 at the end we prescribe bildpropa maintain and reboot


Post has been editeddevserg - 30.10.15, 16:24

This guide, which controls the power when we extinguish the device screen. Installed in a set_cmd pm.mode_sleep = 1

Value 0: Pause power ARM11.
Meaning 1: Completely shutting down the ARM11.
Meaning 2: Software sleep (ARM11 remains on, but is switched to low power mode).
Meaning 3: The frequency of the ARM11 drops to 20 megahertz. Voltage will also be reduced.
Meaning 4: When you sleep, no action will occur (May lead to increased power consumption!).



Post has been editeddevserg - 30.10.15, 16:24

And it is not easier to read the cap (as there are all the answers to any questions for a beginner in this case or with this model of the phone) to put a normal human recovery on the phone. Put any firmware from the header to configure and use. And if you want to try another backup copy of your already tuned firmware and try something new one please, the other, the third ... and so while you do not get bored or until the firmware will end))) And if you understand that your previous one is better, calm And painlessly return to your previous one with all the settings from the copy you can do in a normal custom reccavier. Or stay on another more famous for you. All copies of the data and settings from the previous firmware can be taken through the built-in means or titanium for example.
Since everyone here has its own preferences in firmware. Each firmware with its advantages and its shoals. Depending on whom what priorities are to use this device. I don't know, I often use Naviegol and nor on a multi-meter and on the Deer that I don't use it. Since he is good and honored with the mind. Or ask questions in a personal any of the users whose opinion will be wondering what would not clog the topic. Most I think you will answer.
I do not understand the masochists with the stock recovery. If there is a root, this is the norms, but the custom recacking is bad where logic. What kind of sensing the modified firmware of the stock recovery. Or my skis do not go well or do not understand something. Well, is it really difficult to put firewood on the computer and attract 5 minutes to flash a normal human recovery from the header from the fastbut or to make 6 minutes and flash recovery through the flash station. The same five minutes plus a minute for pulling the battery during the firmware of the recloctery)). And sew any firmware from the cap without bothering with different grades.
Litter for many bukaff)

If your computer DOES NOT SEE TELEPHONE guide (and driver installed) :
View Computer Management \ Manager ..tam devices find portable devices \ redmi note2 ..udalit redmi note2 and once again connect the phone to a computer.
We go in and enjoy conductor)

Already helped many



Post has been editedferhad.necef - 31.10.15, 02:41