Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
ZTE Blade L3 - Firmware |
Message#2 02.06.15, 14:50 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 140 Check in: 18.08.09 Reputation: 11 | Backup dev / nvram section to nvram.img file Very important moment !! If your device does not see the SIM card, does not see IMEI, or there are other problems with radio communication, most likely when flashing through FlashTools or when using CWM, the dev / nvram partition was damaged. It is unique for each device, and therefore it is important to remove this section from the new (working) device !! In the future, this will greatly facilitate the recovery of your device. Yes, you can resort to donor data, but the data will be donor. Creating a file nvram.img (it stores your personal phone data: IMEI, MAC address and other important information) The device must have a patched boot. 1. The driver must be installed on the phone, patched boot.img 2. Launch MTK DroidTools - all parameters should be displayed 3. Click ADB Terminal and write adb devices key adb shell - enter key dd if = / dev / nvram of = / sdcard / nvram.img bs = 5242880 count = 1 - enter key On the PC screen, the process is displayed as follows: D: \ 4 \ MtkDroidTools_v245>adb devices List of devices attached 0123456789ABCDEF device D: \ 4 \ MtkDroidTools_v245>adb shell root @ android: / # dd if = / dev / nvram of = / sdcard / nvram.img bs = 5242880 count = 1 dd if = / dev / nvram of = / sdcard / nvram.img bs = 5242880 count = 1 1 + 0 records in 1 + 0 records out 5242880 bytes transferred in 0.144 secs (36408888 bytes / sec) root @ android: / # Everything, the nvram.img file is saved on your internal phone memory. We got it and hid it. In case of problems with the device, fill it back in the same way: we put nvram.img in the root of the internal memory of the phone .. adb devices key adb shell - enter key dd if = / sdcard / nvram.img of = / dev / nvram After the recovery procedure, do not forget to do wipe data in TWRP or CWM recovery We restore IMEI in case of a meeting with wipe data / (we look at the spoiler) №2 In MtkDroidTools 1. Click on the button to dial the number and enter * # * # 3646633 # * # * 2. Get into the engineering menu and select: "CDS Information", "Radio Information", "Phone1" 3. In the topmost field, where it says AT +, we add EGMR = 1.7, "your_imei1", in the end, we get the string AT + EGMR = 1.7, "your_imei1" and press the "SEND AT COMMAND" button where your_imei1 is your imei for the first sim card 4. If you need to register imei for the second SIM card, then in the same line type AT + EGMR = 1.10, "your_imei2" and again press the "SEND AT COMMAND" button 5. Exit the engineering menu and reboot the smartphone 6. Check your imei by dialing the code * # 06 # in the dialing string The method can be said essentially one-time. If you have problems with IMEI after wipes, this method is no good !!! But, since you are a very prudent person, and you have merged nvram.img in advance, then restoring IMEI is not difficult :) How to make a firmware dump, and create firmware for the SP Flash Tool when the device is restored. Removing the firmware dump, and the firmware of the phone itself. Install drivers from the header on the computer. Download programs and files from the spoiler "Drivers and Programs" How to remove the firmware dump 1. For example: in the CWM recovery folder, we put the boot.img file from the archive. 2. Run SP_Flash_Tool and select scatter from the CWM recovery folder. There will be 2 points, recovery and boot. 3. Click Download and connect the TURN-OFF TELEPHONE WITHOUT BATTERY to the computer. On the successful firmware will be the message "OK" Recovery and patched boot stitched. (You can only sew boot.img, but the recovery will not be superfluous) 4. Run MtkDroidTools and connect the included phone with debugging via USB. All parameters in the main window of the program should be displayed. 5. Go to the root, backup, recovery tab and click Save userdata and cache, then Backup. The process is 15-20 minutes. When finished, the backup will be saved in the MtkDroidTools folder. Preparing firmware from dump 1. Run MtkDroidTools, in the root, backup, recovery tab, click the button "Prepare blocks for the Flash Tool" and select the file files.md5 from the folder with the dump. Another folder Files_to_FlashTool will appear in the folder with the dump. It is the finished firmware for SP_Flash_Tool in case of recovery of the device. With the firmware, select the scatter from the Files_to_FlashTool folder, click Firmware-Upgrade and connect the device without a battery to the computer. If you have a brick that doesn’t react to anything at all, nor to the connection to the PC, nor the light bulbs, then we connect with the volume button held down "+". TakenHERE Posted 06/02/2015 14:50: How to make a copy of NVRAM? Ruth RutExplorer / data / nvram / md / NVRAM / NVD_IMEI / merge from there mp0b_001 and you will be happy with your IMEI Post has been editedEnlightened grandfather - 05.06.15, 08:47 Reason for editing: In the header |
Message#3 04.06.15, 22:44 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1045 Check in: 23.04.08 Reputation: 153 | |
Message#4 27.06.15, 18:15 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 86 Check in: 18.03.10 Reputation: 45 | vitalysters, here's a CWM for KitKat. It seems everything works. Sew through SP_Flash_Tool. recovery_cwm_6044.img(7.14 MB) Post has been edited111skynow - 27.06.15, 18:19 |
Message#5 05.07.15, 01:10 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 78 Check in: 03.01.11 Huawei P8 Reputation: 2 | Collected TWRP Recovery v2.7.1.1. Maybe someone will come in handy. Attached files TWRP_v2.7.1.1_Blade_L3_KK.zip(8.33 MB) Post has been editedwin4ester - 05.07.15, 01:11 -------------------- Huawei P8 GRA-UL00, Android 6.0, EMUI 4.1 |
Message#6 06.07.15, 16:11 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | Gathered fresher TWRP. Both ways work, where emmc is the internal memory of the phone, where sdcard is a flash Download:TWRP2.8.1.0.zip(8.26 MB) -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
Message#7 09.07.15, 22:40 | |
TWRP [offline] Group: Curators Messages 3707 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: 4082 | TWRP 2.8.7.0 ��� ZTE Blade L3 downloadIn the recovery, by default, the theme "Play" fromz31s1g, and the additional two themes "Dark" and "Light" can be downloaded from the author's site:Materialized theme How to install an alternative theme Version ChangesREAD MANDATORY! This TWRP assembly as the name of the folder for storing backups will use the device model name - “ZTE_Blade_L3â€, which is specified in the configuration file. Consider this circumstance if you work with copies made by previous versions of the program, where the folder could have been called differently. At the same time, you may have to transfer the old backups to the new folder "ZTE_Blade_L3", which TWRP itself will create when you first use the "Backup" function. In addition, in the new version were corrected various, having a place to be, errors. It displays the remaining battery charge, the temperature of the processor, as well as the ability to work directly from the recovery with an SD card and the phone's internal memory via USB connection to a computer. Download 1. As an image, for installation fromSP Flash ToolorMobileuncle MTK Tools : recovery.img(10.55 MB) (Substitute your scatter file) 2. In the form of a patch, for installation from mod-recovery:TWRP_2870_ZTE_Blade_L3.zip(10.65 MB) Installation Recovery is distributed as an image recovery.img and can be installed in various ways. I leave the firmware on your discretion ... Features unlock with swipe When the phone comes out of sleep mode with TWRP running, TWRP is blocked, which is normal and planned by the developers. To unlock, it is proposed to make a “swipe†to the right across the screen (eng. Swipe - to carry out without lifting) - “Swipe right to Unlockâ€. However, this does not work in the usual way, and many are faced with the problem of inability to unlock. It turns out that the “swipe†should be done in a special way. Try this and you should be able to: "Tap on any place on the screen and hold your finger for at least two seconds, then, without lifting your finger, you begin to" pull "to the right rather slowly. You need to start closer to the left edge of the screen, because if you start from the middle, you will not have enough width. Learn About the work of the swipe, you can use the inscription "Swipe right to Unlock" with a lock icon: when the action is triggered, the inscription and the lock begin to "shade" from left to right. " In order not to snoop on the screen at random, in the main menu, through the icon "palette", check the last but one line "Use alternative lock screen", this will help to overcome this problem ... Also, I draw your attention that in the settings there is an opportunity to increase or completely disable the idle time for falling asleep. Problems with an alternative theme from previous versions of TWRP Case from this postCube U65GT Talk 9X - Firmware (OS 4.4.2) (Tarwan Post # 41048653)deserves to be brought here, because the problem is not obvious and it was necessary to break the head, until it was understood why there are no items in the recovery, or separate elements of the menu that slid aside, and similar "miracles." Be careful if you used an alternative theme in the previous version of recovery. In this case, the new version of the recovery, among other settings, will try to use the same theme. However, for each version of TWRP its own theme, and they are not interchangeable. So, in the case of using an alternative theme and changing the version of TWRP, you have two options: either replace the theme on the SD card with the corresponding version of TWRP being installed, or delete the alternative theme using the palette icon. Acknowledgments vitalystersMany thanks for the tests conducted by the new version of the recovery! Post has been editedjemmini - 23.10.16, 00:43 -------------------- Xiaomi Redmi 4X 3/32 |
Message#8 14.08.15, 11:36 | |
Guru [offline] Group: Honorary Gameday Messages 3401 Check in: 07.01.12 Apple iPhone Xs Reputation: 1783 | M We move to subsection |
Message#9 14.08.15, 15:42 | |
║▌║█║▌│║▌║▌█ [offline] Group: Friendssavagemessiahzine.com Messages 2705 Check in: 20.11.14 Xiaomi Redmi 6A Reputation: 451 | ZTE has a very similar hardwareZTE Blade V993W maybe it will be easier to port. : blush: -------------------- Read seven times, ask once ... |
Message#10 14.08.15, 21:53 | |
║▌║█║▌│║▌║▌█ [offline] Group: Friendssavagemessiahzine.com Messages 2705 Check in: 20.11.14 Xiaomi Redmi 6A Reputation: 451 | [email protected], 10:40 TWRP 2.8.7.0 For this, the recovery has made a theme translated into Russian.Link to the author of the translation and the topic itself: derisive: -------------------- Read seven times, ask once ... |
Message#11 15.08.15, 03:49 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | Updates add: secret :. (Reason speed indicator) If anyone remembers, there was a patch for the deodex firmware. It was done: 1. Added a battery item, look at the settings ----->screen. A large number of batteries are downloaded via and-no, right from there. You can change the size. 2. And most importantly, the i-net speed indicator is finished to the mind. Now shows the correct speed, added a shadow to the indicator, it looks pretty nice. And he added an item to it, now in the settings you can turn off, change the update frequency. Screenshots Download, flashBattery_mod_Internet_speed.zip(20.53 MB) PS ... someone was asked to do this Network from the left. If many vote, then you can do. Do not hurt anyone: happy: PSs ... and for newbies, if you are going to bet, read this postZTE Blade L3 - Firmwares (Fast vitalysters # 41902396)where "important note". Post has been editedvitalysters - 15.08.15, 05:07 -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
Message#12 15.08.15, 11:52 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | |
Message#13 15.08.15, 13:11 | |
______________________ [offline] Group: Friendssavagemessiahzine.com Messages 604 Check in: 29.11.12 Xiaomi Mi A1 4/64 Reputation: 21 | [email protected], 11:52 [attachment = "6668196: PicsArt_1439628654004.jpg"] Curtain style lollipop, in repair mode. I do not know whether to take further Maybe it's better to fight with lolipop itself? In the discussions, someone tested lolifox from fly, saying that she got up pretty well. Or it is possible to port cyan, but a lot of fuss is always with cyan |
Message#14 15.08.15, 14:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 243 Check in: 12.03.14 Xiaomi Redmi 5 Plus 3/32 Reputation: 6 | Better with fly! She is stable !! There's only a camera fix! |
Message#15 15.08.15, 23:14 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 09.04.11 Reputation: 7 | [email protected], 03:49 Download, flash Battery_mod_Internet_speed.zip (20.53 MB) I asked, the indicator is gone Post has been editedsnekt @ - 20.08.15, 01:42 Reason for editing: The rules of the section "Android - Firmware" p.3.8. -------------------- ZTE Blade L3, Android?.?.? |
Message#16 15.08.15, 23:23 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | neoborgTurns on in the settings Posted 08/15/2015 23:19: neoborgand you can throw out your prog :-) Posted 08/15/2015 23:23: alexeyTIH,there is no desire, they are jerking me right now somewhere here :-) If anyone is porting, I can take a look, remove the jambs -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
Message#17 15.08.15, 23:25 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 09.04.11 Reputation: 7 | [email protected], 23:19 Turns on in the settings And, tochnyak) thanks. [email protected], 23:19 and you can throw out your prog I will not throw out until 0.5 seconds you do)) By the way, the indicator is only 1, and works the same when downloading / uploading. Is it a type of stack if at the same time? PS: I liked it better when there are 2 of them, red and green. It feels like you did something cool, then thought it was too perfect, and made it worse) the color indicator of the clock is not very beautiful Post has been editedneoborg - 15.08.15, 23:31 -------------------- ZTE Blade L3, Android?.?.? |
Message#18 15.08.15, 23:34 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | neoborgApparently yes, I stole the source code from Sony, I think the indicator is accurate, all the same factory. It is necessary to pick smali to make 0.5, so I’ll say in secret that this figure is terrible for the eye, my brain did not have time to catch the speed normally. Probably night shift affected Posted 08/15/2015 23:32: Red and green, they are not accurate, I only later saw Posted 08/15/2015 23:33: neoborgsay color :-D redo for you Posted 08/15/2015 23:34: neoborg http://www.color-hex.comcode came -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
Message#19 15.08.15, 23:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 09.04.11 Reputation: 7 | [email protected], 23:34 Red and green, they are not accurate, I only later saw I certainly don’t know exactly how it is done in the OS, but I think it was possible to peep the code and the program I was throwing and install it in the firmware. well, for example, or make a prog built-in, but place the coordinates of the indicators where appropriate, and repaint. [email protected], 23:34 say color will alter for you Yes, this is not a dandy with its 52 colors ... # a200ff :-) or better tell me where in the archive color to edit, I'll indulge myself Post has been editedneoborg - 15.08.15, 23:42 -------------------- ZTE Blade L3, Android?.?.? |
Message#20 15.08.15, 23:50 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | neoborgI do not even know what kind of prog you are talking about. Here, for example, you want to drive a program into the firmware, it probably does not weigh shit :-) but it’s not in the memory, the android has it enough, but the fact is that these traffic without any garbage stuffed, are mounted in the firmware and their full weight does not exceed 500 kilobyte :-). SchA can throw you a patch, with your favorite color, if you do not fall asleep Posted 08/15/2015 23:50: neoborg <com.android.systemui.statusbar.NetworkSpeedView android: textSize = "15.0dip" android: textstyle = "italic" android: textColor = "# ff66ffff" android: gravity = "center" android: layout_width = "wrap_content" android: layout_height = "fill_parent" android: shadowColor = "# ff000000" android: shadowDx = "3.0" android: shadowDy = "3.0" android: shadowRadius = "2.0" android: layout_alignParentRight = "true" /> Here :-) -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
Message#21 16.08.15, 00:00 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1687 Check in: 09.01.14 General Mobile GM 5 Reputation: 424 | -------------------- It is better to make a mod on the phone than not to make a mod on the phone |
mobile version | Now: 04/30/19, 14:23 |