[X]Assistant

[fackfack]

Philips Xenium W7555 - Firmware (OS 4.1.2)

Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

ADB driver
Universal adb driver

Instructions

How to repair IMEI
A way to flash recovery via Flashify (not verified)
Manual firmware update instructions
Instructions how to return the internal memory
INSTRUCTIONS FOR PERMANENT DIRECT ACCESS TO THE SECTION WITH FIRMWARE WITH COMPUTER
A possible solution for those who have a phone does not show signs of life.
Restoration from the state of "brick"
Instructions for running Recovery from your phone
Instructions for creating a second section for applications
Instructions how to install ADB driver
Rollback from v_38 firmware to v_33
Programs that will help install init.d
Installer ClockworkMod and Stock Recovery
Solving problems with GAPPS after rolling back to v33a
Creating a second section for applications
WiFi recovery
Instructions for creating a backup and restoring it

Firmware

V33 firmware| Mirrors:1, 2
V38 firmware | Mirror | V_38 firmware flaws
Firmware via FastBoot

Custom firmware

MIUI 13.8.12
MIUI 4.7.18
LEWA OS 5.1

Baidu OS 6 download

Nokia X
Mini PacMan Rom

Recovery

CWM Recovery

miscellanea

Getting Root rights
Getting Root rights without a computer
Instructions for running the built-in recovery
Uninstalling Android system apps
Scripts for Build.prop
Tweaker
Scripts, tweaks, collect them all

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 27.11.16, 13:28

Reason for editing: How to restore IMEI

[Rustam2602]

Hello! Please help me on the question "Restoration of a brick Qualcomm HS-USB QDLoader 9008". Found a postLenovo A760 - Firmwares (post partyhead # 36528402)but everything is empty. Thank you in advance.

[Indestris]

We reached the hands of the device
Found the cause of cutting under loads and without. It was all bonalno simple. There were no thermal pads under the process. Just on top of the sticker with the name. Cool ....
Put a packman. Bye all good

[Indestris]

Started otg on infe from a postPhilips Xenium W7555 - Discussion (Post by GDude # 60948550)
I plan to use in the car as a media player with a 300GB hdisk. I tried, picked up with additional power and USB OTG Assistant.
JetAudio counted and downloaded a list of files from the disk without a hole
It’s better to do it from a tablet, of course, but let's see how the sound will show itself.

[palmer-avia]

I put a packman, the port of yusb (from the functional only charging) and both sims fell off. Before that, there was a very buggy "MIUI v.5 (11.02.14) PRE-stabil_pack_W7555" and there was the same problem with yusb and sim. Earlier, Nokia X was standing, these problems were not observed, but it was different: the phone went into a state of brick, and only by a miracle it was possible to launch it and upload a buggy MIUI with a rolled out port and a sim card.
Does anyone have any thoughts? And are there any stock firmwares that can be stitched through an archive from a flash drive in custom recovery? (The computer stubbornly does not detect the device)

[kurt060970]

SILENT WARRIOR,
thank you
flew this animal
normal flight

[fackfack]

kurt060970,
It has long been removed, the phone is old, the cloud is not rubber, so I apologize)

Post has been editedfackfack - 07.03.19, 14:24

[fackfack]

kurt060970,
Nope

[kurt060970]

kurt060970,
Stock v33 and v38 problem on both firmware, sim card sees but there is no network, tell me who knows the diagnosis and the way to solve?
thanks in advance

[kurt060970]

carcinogenic, carcinogenic,
the same problem, the sim card sees, there is no network, only according to your instructions with the dumps you can solve?

[rastrapovi4]

There was a similar phone. shoveled the whole topic. A lot of balabolov, nowhere found how to remove a full emmc dump in case of getting a brick and the subsequent restoration. There are also a lot of pretentious words written about redevelopment, where you have to sit and calculate addresses in calculators. At the same time, not a single "redesigner" bothered to post fulldamp of the already re-allocated firmware, so that it "flooded and forgotten". In general, a lot of words, but in the case of "take a plane and plane yourself." I do not understand what prevents to make fulldamp and instructions how to pour it all. But since there were a lot of talkers, but I didn’t find anything useful in the topic, I decided to write myself how to merge the full dump for its subsequent pouring.
the means required for this are:
1. emmc software download from the qpst tool kit
2. emmc raw
3. adb run

1. transfer the phone to the recovery via adb run (connect the included phone to the computer, set the adb firewood, start the adb run, select 4. Reboot devices then again 4. Reboot to recovery) After the phone enters the recovery, we distort the usb cable, the phone will be determined in the "COM and LPT ports" the Android ADb interface will also be defined
2. Run the emmc software download, click the Browse button on the main window and select our com-port.
3. Push the button Switch device to DLOAD
4. The phone will detect the Qualcom MMC storage USB device. The system will offer to format the disk - this is not necessary =)))
5. Run EMMCRAW. Press the Read Partition structure button. We get the list of partitions on EMMC.
6. Click Read full image and make EMMC backup ...
The recovery is done via the Write section, using the Browse button we select our .bin file and using the Write full image button we write it.

7. Profit! =)
In the attachment, all the necessary tools are laid out.

Attached files

tools.rar(35.86 MB)

[rastrapovi4]

Can I delete my own messages?

Post has been editedrastrapovi4 - 11.03.19, 10:31