Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Philips Xenium W7555 - Firmware (OS 4.1.2) |
Message#2 30.01.14, 20:43 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 68 Check in: 26.12.10 Xiaomi Redmi Note 5 3/32 Reputation: 2 | You can get root usingKingo root Data is not lost, everything remains in its place. Post has been editedtvrsh - 30.01.14, 20:46 -------------------- Sony Ericsson U20i Philips W7555 Microsoft Lumia 640 3G DS Xiaomi Redmi Note 5 3/32 Global |
Message#3 14.05.14, 12:19 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Instructions for updating the firmware manually)))) I recommend using a different way to install the final version of the software.V38using a memory card (in case the update is not performed viawi-fi / 3G) you must perform the following steps: 1) Download firmware byreference. 2) Copy the file to the root of the memory card (SDUPGRADE.zip) 3) Enter the combination on the screen* # * # 0620 # * # * wait about 1 ~ 2 minutes 4) This window will appear))) 5 ) Click " Upgrade ", wait, this will be an automatic update, after completion, the device will restart. Post has been editedCusco - 10.02.16, 17:30 Reason for editing: Replaced firmware link -------------------- |
Message#4 14.05.14, 23:01 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | |
Message#5 30.05.14, 15:38 | |
Consumer Man [offline] Group: Friendssavagemessiahzine.com Messages 683 Check in: 09.02.10 AGM A9 4/32 Reputation: 86 | Here's a FAK from me for launching the built-in recovery:DO NOT FORGET THAT EVERYTHING IS DONE AT YOUR OWN RISK! If you are not sure, do not go poke! In case if nothing happened at all and the phone does not want to turn back on, open the SIM card cover and press and hold the reset button for 5-7 seconds and release. After that, the phone turns on as usual with a button. 1) Completely turn off the phone (to be sure, in the off state, you can hold the reset for 5-6 seconds) 2) Hold Vol + Vol-, then press Power and hold it without releasing until PHILIPS appears. The inscription PHILIPS stupidly hangs on the screen and will remain so. The main thing is not to let go before the appearance of the inscription (otherwise the phone will turn on) 3) Connect the phone to the computer (on my Win7) and wait for the drivers to get up. They will be installed very much, about 6-7 devices. Vinda7 usually in the internet almost all the firewood finds automatically and puts them. Perhaps the ADB interface will not stand. You can try one of those that rushed here before (in the spoiler for the root) 4) When all the firewood got up (maybe not all, but it will not hurt to start the recovery) download Adb_Run_v_3.24.35 (download not only Google Chrome, otherwise it will block you as malware) 5) Run ADB Run, it looks like a white cmd window, in order to make sure that it sees the phone, press 1 - Device attached? and press Enter, in the next menu again 1 - Device attached? and Enter. For about a second, an inscription will appear, if our processor "msm8225q" is written, it means everything has connected, but if the Device Device List is writing, then most likely not all the firewood is standing, or you can try the body to re-load gr + gr and Pover 6) If the percent is defined, go to 4 - Reboot Devices and select 4 - Reboot Recovery. 7) If everything worked out, the PHILIPS message goes out and the phone is loaded into rekoveri (quite similar to CWM but almost without features) 8) Use the volume buttons to move up or down, use the Power button to select what we need. Amendment: Judging by the reviews and opinions of experienced soforumchan, this method of launching the recovery only works with USB debugging enabled There I chose backup and restore and backed up. But I can not say for sure whether everything can otbakapit this recove, since the entire backup (appeared on a flash drive) weighs in the zip archive only ~ 150MB How to run a native recovery without dancing with tambourines and the ADB run did not find (( Post has been editedSILENT WARRIOR - 23.06.17, 10:04 |
Message#6 02.06.14, 11:28 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Getting Root rights without a computer. Here is the program I got root-rights without a computer. Keep can someone come in handy. Kingroot -------------------- |
Message#7 04.06.14, 21:51 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | scripts for Build.prop scripts 1. Forced launcher memorization ro.HOME_APP_ADJ = 1 2. Increase the quality of pictures to 100% ro.media.enc.jpeg.quality = 100 3. Increasing the size of HeapSize (Dalvik-Cache?) Figure depends on the power of your phone (more powerful - more) dalvik.vm.heapsize = 48m 4. Acceleration of the video chip for drawing the system (thanks to the user UT36104 for clarification) debug.sf.hw = 1 five*. Reducing the "lag" when dialing a number (numbers sometimes do not immediately appear, if you do not feel that, then do not add it) ro.telephony.call_ring.delay = 0 6. Increase speed / responsiveness when scrolling windowsmgr.max_events_per_sec = 150 7. Battery saving wifi.supplicant_scan_interval = 180 pm.sleep_mode = 1 ro.ril.disable.power.collapse = 0 eight*. Remove debug icon on statusbar (?) persist.adb.notify = 0 9. Acceleration of touch reaction (Requires more charge) debug.performance.tuning = 1 video.accelerate.hw = 1 10. Increasing Video Capture / Photo Shooting ro.media.dec.jpeg.memcap = 8000000 ro.media.enc.hprof.vid.bps = 8000000 11. Improving network speed net.tcp.buffersize.default = 4096,87380,256960,4096,16384,256960 net.tcp.buffersize.wifi = 4096,87380,256960,4096,16384,256960 net.tcp.buffersize.umts = 4096,87380,256960,4096,16384,256960 net.tcp.buffersize.gprs = 4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge = 4096,87380,256960,4096,16384,256960 12. Removing the black screen after the call (not all devices) ro.lge.proximity.delay = 25 mot.proximity.delay = 25 13. Fixing some bugs in applications ro.kernel.android.checkjni = 0 14. Turning off the phone's wakeup by pressing the volume buttons ro.config.hwfeature_wakeupkey = 0 15. Turning off butanimation for a faster boot, ideal for those who often reload their device debug.sf.nobootanimation = 1 sixteen*. Different flags (?) ro.config.hw_menu_unlockscreen = false persist.sys.use_dithering = 0 persist.sys.purgeable_assets = 1 dalvik.vm.dexopt-flags = m = y ro.mot.eri.losalert.delay = 1000 Lag Nullifier by ZeppelinRox Nullifier by ZeppelinRox. Allegedly, the lag killer, the author claims that "Some are ready to swear that it is wonderful, some say that there is no difference" # DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE! ENFORCE_PROCESS_LIMIT = false MAX_SERVICE_INACTIVITY = MIN_HIDDEN_APPS = MAX_HIDDEN_APPS = CONTENT_APP_IDLE_OFFSET = EMPTY_APP_IDLE_OFFSET = MAX_ACTIVITIES = ACTIVITY_INACTIVE_RESET_TIME = MAX_RECENT_TASKS = MIN_RECENT_TASKS = APP_SWITCH_DELAY_TIME = MAX_PROCESSES = # End of Nullified Entries 17. debug.composition.type = gpu - gpu gives more smoothness and improves responsiveness of the wheelbarrow, improves the quality of the video being played, but drives the battery more actively. 18. debug.composition.type = dyn - gives the system the right to dynamically decide what to use gpu or software tools for drawing graphics (and sometimes both). For a launcher, this may be suitable, but troubles (artifacts) may happen with some programs. 19. ro.ril.enable.amr.wideband = 1 - improves the quality of the transmitted and received speech during a conversation, that is, removes noise (4-5 people unsubscribed, they say it became better audible). To save battery # #Save battary fix # pm.sleep_mode = 1 ro.ril.disable.power.collapse = 0 Posted 04/06/2014 21:51: Anyone interested can test .... on my one android everything works it) Post has been editedgekas1994 - 07.06.14, 19:12 Reason for editing: In the header -------------------- |
Message#8 07.06.14, 00:38 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | |
Message#9 07.06.14, 22:02 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Who cares you yourself something to stir up tweaker. ® Android Tweaker And who wants more charge from the phone? what would keep longer. Edit build.prop -------------------- |
Message#10 08.06.14, 01:51 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Scripts, tweaks, collect them all (Post # 9231901) Post has been editedvladigor - 08.06.14, 02:01 Reason for editing: in the header -------------------- |
Message#11 12.06.14, 22:25 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | The people, for those who have a battery after upgrading to firmware v_38, quickly discharge, posting the initial firmware v_33 (given in the official Philips group). In the firmware v_33 there are no bugs that are present in the updated v_38. He returned to it yesterday (at v_33) and everything became normal. How to install software using a PC, for this you need: 1) Download the firmware. Download link:http://yadi.sk/d/tjduOx7CJ3oBX 2) Copy the file to the root of the memory card (SDUPGRADE.zip) 3) Enter the combination * # * # 0620 # * # * on the screen, wait about 1 ~ 2 minutes 4) Click the "Update" button, wait, it will be an automatic update, after completion, the device will restart. Post has been editedEnlightened grandfather - 15.06.14, 20:59 Reason for editing: In the header -------------------- |
Message#12 12.06.14, 23:55 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Disadvantages of v38A firmware Posted on 06/12/2014 23:55: 1. The battery was discharged for 6 hours, in active mode. Now day 2 holds. 2. The proximity sensor is buggy when calling. 3. Player n7 constantly crashed with an error. 4. There were arbitrary phone reboots. -------------------- |
Message#13 30.06.14, 11:53 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Programs that will help install init.d support http: //savagemessiahzine.com/forum/d…91241/initdtoggler.apk I got the 1st program. Posted on 06/30/2014 11:53: http: //savagemessiahzine.com/forum/d..al.init.d_src_sign.apk For installation requires busybox® BusyBox Installer Post has been editedgekas1994 - 31.08.14, 17:49 Reason for editing: In the header -------------------- |
Message#14 03.07.14, 12:27 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Instructions for running Recovery from your phone. 1. We put root rights.http: //savagemessiahzine.com/forum/d…/kingroot_3.0.0_en.apk 2. Reboot. 3. Download this terminal.http: //savagemessiahzine.com/forum/d...E8%ED%E0%EB_1.0.62.apk 4. Give the root terminal rights with the su command. 5. We write reboot recovery. And all the phone restarts in Recovery. -------------------- |
Message#15 03.07.14, 13:48 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Instructions for creating a second section for applications Huawei Ascend Y200-Firmware (Post # 23194149) -------------------- |
Message#16 03.07.14, 19:10 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Instructions for solving problems with Google applications after rolling back to v33a. Yes, and who after the rollback of the firmware, errors in Google applications take off. A full total reset is desirable. Otherwise, errors will always crash unless hard reset. -------------------- |
Message#17 05.07.14, 22:34 | |
vacation status [offline] Group: Friendssavagemessiahzine.com Messages 3809 Check in: 02.11.12 Honor 5A L21 Reputation: 88 | Instructions how to install ADB driver. 1. Download the driverPhilips Xenium W7555 (Post # 32497748)and unpack it. 2. Connect the phone to the USB drive. 3. We are waiting for the drivers to become. In addition to Android. 4. Start>>>Control Panel>>>Administration>>>Device Manager. 5. Find Android he will be with such a sign ! 6. Right-click on Android and select update drivers. There will be such a window We choose to search for drivers on this computer. Next, click to select a driver from the list of already installed. This window will be displayed Click all the devices as in the screenshot Then install from disk We indicate the way as on the screen. And it should be like this Then click next and the driver will be installed. I think everything is thoroughly described. There will be questions write. Post has been editedvelikashkin - 26.07.15, 10:03 Reason for editing: spoiler, hat -------------------- |
Message#18 13.08.14, 13:27 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 101 Check in: 26.02.14 Xiaomi Redmi Note 5 Pro Reputation: 9 | Made the second section for applications ... It turned out much easier than previously written here. I did not use the computer - everything is on the phone (I don’t even need to do any resetting and resetting) I used two programs: AParted and Link2SD. (Immediately install) The instruction is as follows: 1. Prepare an empty as flash drive (so as not to lose data from it) 2. Format on the phone and disable it in the memory settings (well, there is such a "disable sd card) 3. Open AParted, we confirm everything 4. Open the second Tools tab, put a check mark on the first section (they will all be the same there but put on the first one) 5. Below in the drop-down list, select delete (delete section), p. s. if you get an error, do not disable the card in the settings. We press apply, everything should turn out. 6. Go to the first tab of the CREATE program, press the green plus, and cancel the place FOR SIMPLE FILES - BALANCE ALREADY ON APPLICATIONS. FAT32 do not touch it should be, do not remove the tick in format. Click the menu button on the phone - apply the changes. Everything should go smoothly. 7. Go back to the second tab of the Tools program, put a tick in the second section (its size will be the remainder of what was left) in the drop-down list, let it be CREATE, click apply, then select EXT3 (YES YES EXT3 with ext2 It turns out), somehow we confirm it all again, here is the section for applications ready. Then we work in another program, NOW SD CARD CONNECT. 1. Open link2sd, at the first start it seems he himself suggested creating a partition (if not, push the left panel - - re-create the mount script, select ext3, click ok. 2. Asks to reboot - reboot tel. 3. After rebooting, we open this program again, click the three dots in the upper right corner - - memory, look. then you did wrong. 4. Well, if everything turned out - you are happy ... Now, through this program, you can link applications to the card .. P. S. In the settings of link2sd, set automatically link applications (new installed applications themselves will link to the card) The card can be formatted in the body as usual, it will not affect the second section) It seems to be all the rules said censorship M 5.3. Implicit or explicit extortion of raising a reputation is forbidden, for example: “I helped you, and you didn’t even say thanks!” Or “You could have raised your reputation!” If you deserve a raise of reputation, you will be raised without reminders. Check outForum Rules! Post has been editedNoreg - 14.08.14, 11:47 |
Message#19 13.08.14, 14:21 | |
Consumer Man [offline] Group: Friendssavagemessiahzine.com Messages 683 Check in: 09.02.10 AGM A9 4/32 Reputation: 86 | A possible solution for those who have a phone does not show signs of life and when the USB is connected and charging, the keyboard backlight flashes. Duma would not be bad to share the experience of 8 disassemblies and assemblies of your phone)))) My hobby for mikrozvuku, dismantled and assembled after each installation of the other! Speakers! So, I found a small weak spot in the power system of our beast, but rather in the battery! Once again, having disassembled the phone to replace the installed speakers with others, I discovered a strange phenomenon. The phone just turned off and stopped turning on! Symptoms of behavior are very simple (someone in the subject wrote what it was), When charging is connected, the backlight, home, menu button lights just blink, but the phone no longer responds. So, the reason was that the controller "protection against short circuit" in the battery board died. In short, the power supply did not go with the battery, that is, we cling to charging as if with Akum taken out, so he does not react. BTW, having studied the literature on this chip, I realized that it may be buggy due to a strong overdischarge or any manipulations with the power of the phone! The solution to the problem is very simple, but only for those who can work as a soldering iron! 1) Remove the battery cover (3 screws, and then a guitar pick can be) Screws 2) As soon as we see the battery, pay attention to the board (controller) sealed in white protective paper. We need it. More do not need to disassemble. It is only necessary to remove the film and bumgu in the place marked in red (see the drawing below). 3) In this picture, two diagnostic heels are marked (green) (visible through the film and paper), a jumper is soldered to them. 4) Turn on the phone and enjoy the saved phone. Post has been editedSILENT WARRIOR - 29.05.15, 10:56 |
Message#20 21.12.14, 19:45 | |
Visitor [offline] Group: Users Messages 11 Check in: 26.10.14 HTC 10 Reputation: 1 | |
Message#21 25.01.15, 19:10 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1105 Check in: 03.11.14 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 248 | working link to v38 firmware I recommend using another way to install the final version of the V38 software using a memory card (in case the update is not performed via wi-fi / 3G), you must perform the following steps: 1) Download the firmware by the link:V38 2) Copy the file to the root of the memory card (SDUPGRADE.zip) 3) Enter the combination * # * # 0620 # * # * on the screen, wait about 1 ~ 2 minutes 4) Click the "Update" button, wait, it will be an automatic update, after completion, the device will restart. Post has been editedLeonid28 - 10.02.16, 05:37 -------------------- |
mobile version | Now: 04/30/19/07: 07 |