Supports F / I / S / K / L / T / W8 variants of 920 AND 925 devices
- Supports 920FS, ID and SD Dual SIM devices
- All edge devices working
- Built from official Samsung BOFJ / COF8 / BOG8 Sources
- Interactive governor as default
- CFQ I / O scheduler as default
- VM memory optimisations
- Full init.d scripting support
- SE Linux set to permissive (will prevent private mode from working)
- Stock Clocks
- FHA tweaks added to build.prop on flash
- Fully working Auto-Root for all 5.1.1 roms
- BusyBox injection if not detected in ROM
- Supports engineering bootloaders- including Call Audio
- Optimized Inputbooster head / tail times for responsiveness
- And More .....

Unikernel v5-0002
- Patchup to full BOG8
- Completely overhauled Unification
- Updated Touchscreen firmware for all models
- Fixes "Backwards screen" scenario on some 925 models
- Completely reworked Cypress / FTS Touchkey unification code
- Supports engineering bootloaders- including Call Audio
- Added variant detection to Thermister (temp sensor) values ​​in universal device tree
- Optimized Inputbooster head / tail times for responsiveness
- Reduced some WakeLocks
- Added Google apps power management tweaks
- Re-added lz4 zswap compressor and set as default
- Inreased swap size
- Removed faulty memory management tweaks (lag fix)
- Entropy deletion fix
- Added more support for Korean (K) variants
- Removed all possible kernel debugging, logging and statistics gathering, except Android Logger

1 we throw archive with a kernel on the device
2 install TWRP Recovery
3 go to TWRP and go to the Install item
4 find the archive with the kernel
5 poke a finger through the archive with the core
6 there will be a window in it below we do a swipe for installation
7 at the end there will be three items click on wipe cache and dalvik cache and do the svayp
8 go out and enjoy

-COF8 Source Based
-Universal Kernel! (Thanks to G.lewarne and Ktoonsez patchset!)
-VControl Kernel Control Script (Loosely Based On lkconfig by imoseyon)
-Compiled With Graphite, Loop Nest Optimizations And Many Others.
-Various Other Build Optimizations
-WLAN_RX & WLAN_CTRL Wakelocks Reduced
-VMA Caching
-Interactive Governor Patches / Mods
-A53 UnderClockable To 200Mhz
-A57 UnderClockable To 200Mhz
-Slub Allocator Updated To Linux 3.18
-Memory Management Updates
-Arm Efficient Unaligned Access Enabled
-Reduced Scheduler Wakeups
-Updated The Tickless Kernel System
-Nvidia Power Efficiency Patches
-Encrypted Performance Improvements
-Deep sleep fix
-Disabled MMC-CRC For Better Speed
-Disabled IO Stats For Faster IO
-Memory Leak Patches
-Sleep / Suspend Patches
-3X Faster Integer Square Root Operations
-HRTimer Optimizations
-Avoid load Average Moire
-Scheduler Optimizations
-Memcopy and String Optimizations
-Use Compile Time Constants For Jiffies Conversion When Possible (Reduces CPU Overhead)
-Workqueue Updated To Linux 3.18
-Optional Power Efficient Workqueues (Expanded to more modules than normal as well)
-Moto QuickWakeup Driver
-Frandom (Efficient Random Number Generator)
-Cruft Free
-Slimmed Down
-Tons Of Debugging and Tracers Removed
-Many Misc. Optimizations
-Added Fiops IO Scheduler
-Tons Of IO Fixes / Performance Boosts
-Voltage Control
-Entropy Optimizations / Tweaks
-Optimized RWSEM
-Many Parts Pulled From Upstream
-Init.D Support
-Installs SU
-Installs busybox
-Updated From Linux 3.10.61 To 3.10.83
-Updated Memory Management Tweaks
-Update interactive tunings
-Fix App Installing
-Fix Random Reboots
-Removed Overclocking For Now (Caused reboots)
-Removed Fsync Toggle (Caused app installs to fail)
-Added Asynchronous Fsync (Faster Fsync)
-Fixed Frandom Permissions
-Additional Entropy Optimizations
-Added Interactive Patches
-Trimmed more stuff
-Interactive No Longer Scales Up The Frequency Below 5% Load (Better Battery)
-Potentially Something I Forgot ...

# Based on latest G925FXXU2BOFJ
# Pre-Rooted
# Compiled with AARCH64-Android-4.8 toolchain - Google Kudos, this is one is awesome
# Replaced CPU_FREQ_RELATION_L with C for Interactive ->eqlidean distance to target freq, should be more efficient
# MDNIE ColorControl
# VoltageControl (CPU, GPU, HPM, BUS)
# Underclocking by default
# Full Synapse Support
# SELinux mode set to Permissive
# Governors added: powersave, intellidemand, ondemand, bluactive and intelliactive
# busybox and init.d

R5u
- Unified Build
- Pre-rooted
- simplgov added
- Custom govs temporarily disabled
- Based on BOFJ 5.1.1
- Some Synapse derps fixed up

-BOG8 Source Based
-Universal Kernel! (Thanks to G.lewarne and Ktoonsez patchset!)
-VControl Kernel Control Script (Loosely Based On lkconfig by imoseyon)
-Compiled With Graphite, Loop Nest Optimizations And Many Others.
-Various Other Build Optimizations
-WLAN_RX & WLAN_CTRL Wakelocks Reduced
-TouchBoost Removed
-VMA Caching
-Google's Snappy Compression Algorithm
-Interactive Governor Patches / Mods
-Interactive Screen Off Max Frequency Configurable
-SensorHub Wakelock Toggle To Remove
-A53 UnderClockable To 200Mhz
-A57 UnderClockable To 200Mhz
-Slub Allocator Updated To Linux 3.18
-Memory Management Updates
-Arm Efficient Unaligned Access Enabled
-Reduced Scheduler Wakeups
-Updated The Tickless Kernel System
-Nvidia Power Efficiency Patches
-Encrypted Performance Improvements
-Deep sleep fix
-Disabled MMC-CRC For Better Speed
-Disabled IO Stats For Faster IO
-Memory Leak Patches
-Sleep / Suspend Patches
-3X Faster Integer Square Root Operations
-HRTimer Optimizations
-Avoid load Average Moire
-Scheduler Optimizations
-Memcopy and String Optimizations
-Use Compile Time Constants For Jiffies Conversion When Possible (Reduces CPU Overhead)
-Workqueue Updated To Linux 3.18
-Optional Power Efficient Workqueues (Expanded to more modules than normal as well)
-Moto QuickWakeup Driver
-Frandom (Efficient Random Number Generator)
-Cruft Free
-Slimmed Down
-Tons Of Debugging and Tracers Removed
-Many Misc. Optimizations
-Added Fiops IO Scheduler
-Tons Of IO Fixes / Performance Boosts
-Voltage Control
-Entropy Optimizations / Tweaks
-Optimized RWSEM
-Many Parts Pulled From Upstream
-Init.D Support
-Installs SU
-Installs busybox
-Potentially Something I Forgot ...

R3:
-Lag Free Interactive Tweaks (Glewarne)
-Interactive Screen Off Max Frequency = (InteractiveX)
-InputBooster Removed (Touchboost)
-BOG8 Source Update
-Memory Management Update
-Better Frequency Selecting By Interactive
-Numerous Interactive Code Optimizations / Patches
-Added A Toggle To Remove SensorHub Wakelock In VControl
-Remove Task Packing
-Trimmed More Things / Debugging
-Removed Forced Full screen Updates
-Some Power Efficient Related Tweaks
-Additional Optimizations
-Many Misc Things.

1 we throw archive with a kernel on the device
2 install TWRP Recovery
3 go to TWRP and go to the Install item
4 find the archive with the kernel
5 poke a finger through the archive with the core
6 there will be a window in it below we do a swipe for installation
7 at the end there will be three items click on wipe cache and dalvik cache and do the svayp
8 go out and enjoy

Supports F / I / S / K / L / T / W8 variants of 920 AND 925 devices
- Supports 920FS, ID and SD Dual SIM devices
- All edge devices working
- Built from official Samsung BOFJ / COF8 / BOG8 Sources
- Interactive governor as default
- CFQ I / O scheduler as default
- VM memory optimisations
- Full init.d scripting support
- SE Linux set to permissive (will prevent private mode from working)
- Stock Clocks
- FHA tweaks added to build.prop on flash
- Fully working Auto-Root for all 5.1.1 roms
- BusyBox injection if not detected in ROM
- Supports engineering bootloaders- including Call Audio
- Optimized Inputbooster head / tail times for responsiveness
- DriveDroid support
- And More .....

1 we throw archive with a kernel on the device
2 install TWRP Recovery
3 go to TWRP and go to the Install item
4 find the archive with the kernel
5 poke a finger through the archive with the core
6 there will be a window in it below we do a swipe for installation
7 at the end there will be three items click on wipe cache and dalvik cache and do the svayp
8 go out and enjoy