[X]Assistant

[Winlocker]

DiscussionHuawei E8372 ( MTS 8211F )

Forewarned is forearmed! (link)

Attention!

It is impossibleflashing modems with ALIEXPRESS ZONG / TELENOR without ADB:

Huawei E8372 (MTS 8211F) - Discussion (juster2 Post # 64927491)
Huawei E8372 (MTS 8211F) - Discussion (Post froll-72 # 64955165)
Huawei E8372 (MTS 8211F) - Discussion (Post sert55 # 65020137)

Modems recommended for purchase.

Photo device

Specifications

Specifications:

• GSM 850/900/1800/1900 MHz
  
• UMTS 900/2100 MHz
  
• LTE-FDD 800/900/1800/2100/2600 MHz
  
• Wi-Fi 802.11b / g / n
  
• Connect up to 10 devices via Wi-Fi.
  
• Support for microSD memory cards up to 32 GB.
  
• Two TS-9 connectors for connecting an external antenna.

Data transfer rate:

• LTE technology up to 150 Mbps
  
• DC-HSPA + technology up to 43.2 Mbps
  
• EDGE technology up to 236.8 Kbps

Modifications:

• E8372h-153
  
• E8372h-510
  
• E8372h-607
  
• E8372h-608
  
• E8372h-927

Frequency modifications.

Drivers

• HUAWEI_DataCard_Driver_6.00.08.00_Setup- HUAWEI DataCard Driver ("stick" drivers)
  
• FC_Serial_Driver_Setup- Driver for modem ports in HiLink
  
• set_hilink_switch_01- Switching control to a secondary, working USB composition in Windows (For HiLink modems and routers with USB, an alternative to MobileBrServ)

Firmware

• E8372h-153_21.180.07.00.00.
  
• E8372h-153_21.313.11.00.00_Universal.zip(50.81 MB)
  
• E8372h-153_WEBUI_17.100.08.00.03.
  
• E8372h-153_WEBUI_17.100.12.00.03_Universal.zip(27.14 MB)
  
  
• E8372h-153_Update_21.318.01.00.00_M_01.10_for_.143- Transitional firmware for MTS 8211F from rust3028
  
• Modified firmwareby rust3028
  
• Modified firmware for Zong and Telenor modemsby rust3028
  Attention!This firmware is for Zong (.306) and Telenor (.274) modems only.
  Installing these firmwares into regular modems will cause them topermanent lockon camera firmware Zong or Telenor.
  
• Modified web interfaces for HUAWEI modems, E8372H firmware and Usefulby jager911
  
• Modified firmware for E8372hby anvldko
  
• Modified firmware and interface for E8372h ZONG (.306) and Telenor (.274)by anvldko
  
• Modified web-interface based on WebUI 17.100.17.00.143by ilya-fedin
  
• The Restore button for WEBUI_17.100.18.03.143_HILINK_Mod1.21by jager911
  
• A selection of original (non-unbreakable) firmware for Huawei e8372h-153
  
• A selection of original (non-banded) WEBUI (WEB User Interface) web interfaces for Huawei e8372h-153
  
• E8372 disc content
  

Instructions

• Unlocking the modem with a modified firmware (similar to 21.xxx.99.xx.xx.)
  
• Universal firmware manual E8372h-153 and E8372h-608
  
• Calculation of OEM and NCK codes, Backup, Unlock (UNLOCK), Change IMEI, Change OEM and SIMLOCK modem codes
  with stock firmware 21.180.xx.xx.nx / 21.210.xx.xx.nx, while maintaining the factory firmware, without the "Needle Method"
  
• Receiving OEM code and unlock code (SIMLOCK) while maintaining the factory firmware
  
• Access to AT commands, DATALOCK and receive OEM code.(similar to the modified firmware)
  
• Change IMEI on a modified firmware or official with unlocked AT-commands.
  
• Recover, change and dock MACWLAN [MAC address of WLAN] and IMEI [does not depend on the presence of a SIM card in the modem]
  
• Installation instructions for a modified web interface from ilya-fedin to Zong and Telenor modems.
  
• Instructions for the transition (without needles) to mod. firmware for modems with firmware below and including 21.316 ...(.143 - throughtransitional)
  
• Needle method.(If will be usedE8372h-153_Update_21.110.99.05.00it is recommended insteadE8372h-153_Update_21.110.99.05.00_nv01 )
  
• A radical option "Restoring a modem by erasing flash partitions via fastboot"

Useful

• Using Caps and Topic SearchHuawei E3372 (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153)for E8372h

  
  Since E8372h and E3372h are on the same Balong V7R11 platform, some utilities, scripts, drivers, etc. for E3372h from the topic "Discussion Huawei E3372" are applicable for E8372h, only firmware andbootloader (usblsafe_E8372h)need to use for E8372h.
  For example:
  

  • Modem recovery by erasing flash partitions via fastboot
    If the modem has stopped seeing the network, it has become unknown or an ADB device. Constant Error 21 when flashing to various operating systems and connected modem via USB 2.0 interface
    (Archive to takeE3372h _repair_01.rarKit to use as is - with the loader usblsafe-3372h.bin . Upon completion of the script download usblsafe-8372.bin as with the "needle method", it is not necessary to reload and close the contacts. )
    
  • Solving the problem with the emergency modem boot port in Windows 8.1 and Windows 10
    
  • How to open ports in HiLink (what to do if the flash driver gives error 10)
    
  • Kit for flashing through balong_flash
    
  • Sewing kit
    ... and much more .., well, if there is a choice: for E3372s or for E3372 h , then choose what is intended for E3372 h
    
    That is, the solution of some questions and problems on the E8372h can be found in the header and search in the topicHuawei E3372 (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153)

  
  
  
  
  
• Recommendations for choosing Huawei E8372
  
• Scripts for fast modem upgrades.
  
• ADB Installer
  
• VBS script to run the ADB server in the router(Login -root ; The default password is admin .)
  
• Setting and removing a password for accessing the Linux console via Telnet.
  Run the ADB server in mod. firmware with a password for accessing the Linux console via Telnet.
  
• The ability to access the Linux console, on modified firmware, through the port (not ShallB)
  and entering the modem into boot mode, if the AT ^ GODLOAD command is not supported
  
• Change device IP address
  Installing DNS servers sent by the modem via DHCP
  Decoding http://192.168.8.1/api/device/signal
  
• Script to execute AT ^ DLOADINFO?
  
• The real numbers of energy consumption E8372
  
• Photo of the internal modem.
  
• Photo of the internals of the E8372 modem in the analysis, with the screen removed
  

The possibility of using frequencies E8372h-153 in E8372h- 608

Post has been editedctich - 10.04.19, 18:39

[t300t]

By the way
AT ^ DATALOCK = "OEM code"
also ERROR

[rust3028]

t300t,
Thank you, but everything turned out.

Team
AT ^ DATALOCK = "OEM code"
it works, and after it, the rest of the AT commands begin to work.

The OEM code is selected by a calculator and should consist of 8 digits.

[t300t]

rust3028 @ 08.28.2015, 21:48

The OEM code is selected by a calculator and should consist of 8 digits.

I picked up the code with this calculator:Huawei E3372s and E3372h (MTS 827F, Megaphone M150-2, Beeline E3372s) - Discussion
But the result is zero. Just in case, I tried all the codes that the calculator issued, although I only need v201, if I understood correctly. Maybe the calculator is wrong? What else to try?

[rust3028]

t300t,
Wrong. Thiscalculatorneed
But you have to change to the 99th firmware and enter the command
AT ^ NVRDEX = 50502,0,128
And not dc-unlocker, but this oneterminal, eg.

[tihonovs37]

Great comrades! As I did not fight with this modem, I don’t want to connect 4g in the megaphone. There is a suspicion that the frequency is blocked or MegaFon broadcasts in TDD. Although I see in manual search. Smart people tell me how to beat this crap. I will try to make a screen with huawei terminal.

[t300t]

Tihonovs37 @ 08.29.2015, 07:43

As I did not fight with this modem, I don’t want to connect 4g in the megaphone.

Which city is this?
Just checked with Megaphone (Moscow)
Speedtest 38 Mbit / 25 Mbit

[tihonovs37]

t300t @ 08.29.2015, 08:32

Which city is this?

Ivanovo.

[tihonovs37]

that's what the Recieve terminal gave me: ^ PLMNSELEINFO: 1.1
Recieve: ^ SYSCFGEX :( "00", "01", "02", "03", "99"), ((2000000400380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (280,000, "GSM850 / GSM1900 "), (3fffffff," All bands ")), (0-2), (0-4), ((800c5," LTE BC1 / LTE BC3 / LTE BC7 / LTE BC8 / LTE BC20 "), (7fffffffffffffffff , "All bands") can jamb in firmware. T300t what firmware do you have?

Post has been editedtihonovs37 - 29.08.15, 18:12

[t300t]

Tihonovs37 @ 08.29.2015, 19:10

t300t you have what firmware?

I have 21.180.07.00.00
I did not find a new one, though I didn’t look very much :)
Link to the firmware here in this post is:Huawei 8372h (MTS 8211F) (Post t300t # 42538018)

[nik_33]

rust3028 @ 08.28.2015, 20:48

Team
AT ^ DATALOCK = "OEM code"
it works, and after it, the rest of the AT commands begin to work.

not working all the timeterminalgives out
AT ^ DATALOCK = "OEM code"
ERROR
How to change imei?

Manufacturer: huawei
Model: E8372h
Revision: 21.110.99.04.00
IMEI:
+ GCAP: + CGSM, + DS, + ES

Post has been editednik_33 - 30.08.15, 10:41

[rust3028]

[email protected], 10:35

AT ^ DATALOCK = "OEM code"
ERROR

Did you consider the code itself a calculator?

[rust3028]

[email protected], 10:35

How to change imei?

As usual, the command AT ^ CIMEI.

[Loud_swir]

Unlocked is on sale? If so, what is the price?

[rust3028]

Access to AT commands, DATALOCK and receipt of OEM code

As many have probably understood, most of the AT-commands in the working firmware is blocked.
To unlock them, enter the command

AT ^ DATALOCK = "OEM code"

OEM code can be obtained usingCalculator for E3372h.
You can simply change this code in the modem to 00000000 in the manner describedhere.

The selection (or change) of the OEM code is performed on firmware 21.xxx.99.xx.xx. Therefore, it is advisable to do it simultaneously with the unlock.

This code may also be needed for the AT ^ SPWORD command, as well as a password for accessing the Linux console through the port.

It is also possible to remove the DATALOCK lock permanently.

Read more ...

To do this, read the contents of cell 50502 NVRAM,

AT ^ NVRDEX = 50502,0,128
^ NVRDEX: 50502,0,128,63 A7 19 93 3F 65 CF 07 1B AC 18 0A C8 C2 4B 0C 9C 4D 28 34 73 E1 15 6B 79 12 EB 1D 84 15 58 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A6 22 61 59 4B AD BF 74 AA FD 02 6C BA 22 C3 F8 78 EC 9F A2 3D D1 EF F0 D8 A8 C0 D5 63 36 C3 07 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Ok

(your modem codes will be different)
replace the last nonzero value (01) with 00 and write everything back.

AT ^ NVWREX = 50502,0,128,63 A7 19 93 3F 65 CF 07 1B AC 18 0A C8 C2 4B 0C 9C 4D 28 34 73 E1 15 6B 79 12 EB 1D 84 15 58 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A6 22 61 59 4B AD BF 74 AA FD 02 6C BA 22 C3 F8 78 EC 9F A2 3D D1 EF F0 D8 A8 C0 D5 63 36 C3 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Or you can do it simultaneously with setting the OEM code to 00000000:

AT ^ NVWREX = 50502,0,128,8F 29 FF 8E A8 CA 34 89 78 73 18 BA 9E F5 9C 64 B A4 DB 81 DC 3 45 6E 72 DA EC 6A C 7C 90 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 8B 8C F4 B5 AF C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 5 7F 84 AB A9 F2 92 89 33 3C 12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Post has been editedrust3028 - 24.11.15, 10:43

[nik_33]

rust3028 @ 08/30/2015 10:42

Did you consider the code itself a calculator?

YesAT ^ DATALOCK
ERROR
And imei does not change writes
+ CME ERROR: 50 means that the SIM card for some reason is not registered on the network, or it works in a limited mode. I tried another SIM card on firmware 21.110.99.04.00

Posted 08/30/2015 12:39 PM:

Loud_Swir @ 08/30/2015 11:07

Unlocked is on sale? If so, what is the price?

http: //www.dns-shop.ru…515/modem-huawei-e8278
http://www.mvideo.ru/p…i-e8278-white-30019899

Post has been editednik_33 - 30.08.15, 12:59

[rust3028]

nik_33,
So the AT ^ DATALOCK command didn’t work? Probably you are not trying to slip the code to her. Or maybe on the firmware 21.110.99.04.00 it somehow does not work that way.

You can still trymethod of changing the IMEI command AT ^ NVWREX = 0,0,16.

In general, save all the answers to the commands AT ^ NVRDEX = 50502,0,128 and AT ^ NVRDEX = 50503,0,128, go back to 21.180.07.00.00, and understand further.

Post has been editedrust3028 - 30.08.15, 15:37

[alexey2121]

Faced a problem - it does not work on win10, there is a network, but when I try to open any page, there is silence. I tried on another PC with win7, the same thing plus a crash to BSOD. Modem from MTS 8211F (Version AO CL1E8372HM, Software Version 21.210.03.00.143, Web Interface Version 17.100.09.01.143)

[nik_33]

[email protected], 13:17

go back to 21.180.07.00.00, and sort it out further.

and on 21.180.07.00.00 the team work? ports open only on 21.110.99.04.00

Post has been editednik_33 - 30.08.15, 21:01

[Spimenov]

Loud_Swir @ 08/30/2015 11:07

Unlocked is on sale? If so, what is the price?

http://www.nix.ru/auto…8372-White_209699.html
http: //www.shopcarry.r...-4g-lte-mod-wi-router/

[rust3028]

[email protected], 19:34

and on 21.180.07.00.00 the team work?

AT ^ DATALOCK works on any firmware.
After entering it with the correct code, all other commands will work.