740 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Huawei E8372 (MTS 8211F) - Discussion | 4G-modem with Wi-Fi function
Winlocker
Message#1
22.07.15, 12:42
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1551
Check in: 07.09.13

Reputation:-  295  +

DiscussionHuawei E8372 ( MTS 8211F )


Attached Image


Attention!
Photo device
Attached Image

Specifications

Specifications:
  • GSM 850/900/1800/1900 MHz
  • UMTS 900/2100 MHz
  • LTE-FDD 800/900/1800/2100/2600 MHz
  • Wi-Fi 802.11b / g / n
  • Connect up to 10 devices via Wi-Fi.
  • Support for microSD memory cards up to 32 GB.
  • Two TS-9 connectors for connecting an external antenna.
Data transfer rate:
  • LTE technology up to 150 Mbps
  • DC-HSPA + technology up to 43.2 Mbps
  • EDGE technology up to 236.8 Kbps
Modifications:
  • E8372h-153
  • E8372h-510
  • E8372h-607
  • E8372h-608
  • E8372h-927

Frequency modifications.

Drivers

Firmware
Instructions
Useful




The possibility of using frequencies E8372h-153 in E8372h- 608

Post has been editedctich - 10.04.19, 18:39
Kazanecc
Message#22
22.08.15, 10:16
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 67
Check in: 25.08.07
Oneplus 5T 8/128

Reputation:-  4  +

Avcnet @ 08.21.2015, 21:39*
Exactly, I had an E392 modem connected to the same antenna and this one, the connectors are the same there.

Thank you, and then embarrassed the data on the official site.

Hentrs @ 08.21.2015, 23:09*
Well, I do not know, the huavei always hung, the CRC9 connectors on their models.


TS-9 Compatible with the following models: Huawei: E392

CRC-9 Compatible with the following models: E3276 (M150-1), E352, E353, E355, E3131, E367, E156, E160G, E160, E169, E169G, K3520, K3806, E176G, E3272 (M 100-4) and others .

Let's hope that the TS-9 will do, although I don’t want to make a mistake, the pigtail is 500r. worth it :)

Post has been editedKazanecc - 22.08.15, 11:07
-SP-
Message#23
22.08.15, 22:36
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 99
Check in: 15.11.11

Reputation:-  7  +

Kazanecc @ 08.22.2015, 10:16*
Let's hope that the TS-9 will do, although I don’t want to make a mistake, the pigtail is 500r. worth it

And how to reliably clarify? There is no pigtail, there are 392 and this 8372h. Nests look the same. The caliper is also there, although they still have to get into that problem ((
Spencer
Message#24
23.08.15, 23:13
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 57
Check in: 23.12.06
Apple iPhone Xs Max for China

Reputation:-  4  +

I bought an antenna in Mitino and TS-9 tails to it. By 8372h come.

Post has been editedSpencer - 23.08.15, 23:14
Johnyg87
Message#25
26.08.15, 06:14
a guest
*
[offline]

Group: Users
Messages 2
Check in: 21.08.15
Nokia Lumia 1520

Reputation:-  0  +

Also in 8372 I stuck the antenna ts-9. Altelovsky modem (Kazakhstan 4g) with native altel firmware and ui, how to send ussd commands from it?
t300t
Message#26
26.08.15, 20:38
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

People, is there news on the unlock? Or while dsunloker only?
rust3028
Message#27
27.08.15, 10:53
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

t300t @ 08.26.2015, 20:38*
People, is there news on the unlock? Or while dsunloker only?

And what prevents to flash 21.110.99.04.00 and do one of two things:

1. Unlock AT Command
AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0

2. Get unlock codethis calculator.

Post has been editedrust3028 - 29.08.15, 11:18
Nimezis13
Message#28
27.08.15, 22:29
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 116
Check in: 07.05.09

Reputation:-  3  +

at commands do not seem to perceive

Post has been editedNimezis13 - 27.08.15, 22:30


--------------------
witu 8Gb + 16GbMicroSd + WM 6.5 with Manila (XIP / SYS 23017) (from 09/21/2009)
i9100 white ->CM 11
galaxy win stock root
iMeedo
Message#29
28.08.15, 01:19
a guest
*
[offline]

Group: Users
Messages 1
Check in: 12.08.09
Apple iPhone 6

Reputation:-  0  +

Option 2 is working, verified.
nik_33
Message#30
28.08.15, 09:48
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 475
Check in: 03.04.11

Reputation:-  15  +

iMeedo @ 08.28.2015, 01:19*
Option 2 is working, verified.

How does he work? if a
Enter the codes from the result of the AT command:
AT ^ NVRDEX-50502.0.128 - for obtaining the OEM Code
AT ^ NVRDEX = 50503.0.128 - to obtain the NCK code

commands do not work.

Post has been editednik_33 - 28.08.15, 09:52


--------------------
KI Pro DVB-S2 / T2 / C
t300t
Message#31
28.08.15, 10:33
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

* rust3028,
Thank you so much, option 1 worked :)

* nik_33,
How are you doing with firewood? I had the same symptoms (the green LED and dc-unlocker did not detect the modem), until I tusk manager didn't knock out the remnants of the software that flooded the previous firmware. After that, the dc-unlocker saw the modem and gave to enter the at-command
AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0
rust3028
Message#32
28.08.15, 10:48
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

ALL
Calculate the same calculator as well as the OEM code, it may be necessary to unlock AT commands on the working firmware.
t300t
Message#33
28.08.15, 10:55
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

rust3028 @ 08.28.2015, 11:48*
need to unlock AT commands on the working firmware

And why is it necessary? Otherwise, I am not quite in the subject line, the modem is unlocked, but something else interesting can be done. As I understand it, the next step is MTU and IMEI for receiving Yota. But this is not relevant to me, purely sporting interest.
rust3028
Message#34
28.08.15, 11:00
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

* t300t,
Well, before changing IMEI you will probably have to enter a command
AT ^ DATALOCK = "OEM code"
rust3028
Message#35
28.08.15, 11:29
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

iMeedo @ 08.28.2015, 01:19*
Option 2 is working, verified.
t300t @ 08.28.2015, 10:33*
Thank you so much, option 1 worked

Well, the possibility of free unlocking and tested. True, again, at the cost of losing stock firmware.

And the third option, perhaps, is superfluous ...
t300t
Message#36
28.08.15, 12:25
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

rust3028 @ 08.28.2015, 12:29*
True, again, at the cost of losing stock firmware.

Well, after the unlock, I installed a new firmware from here:https://3ginfo.ru/page245.html
Visually, it is no different from stock, most likely, this is the stock.
t300t
Message#37
28.08.15, 12:43
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

Here is a brief manual on how to free up the modem.

1. First of all, flashing the modem with firmware: Huawei E8372h-153 21.110.99.04.00 GeneralAttached fileHuawei_E8372h-153_Firmware_21.110.99.04.00_general_3Ginfo.ru.7z(43.83 MB)
(download and unpack to folder)
During the firmware you will need a flash code, you can get itin this program. Drive in IMEI and press the button.
We get something like this:
Your codes:
Unlock 12345678
Flash 87654321
We will need the latest Flash code.
Do not forget that during the firmware in the modem should not be a sim card. We take out the SIM card and insert the modem into the computer. Go to the folder with the downloaded firmware and run a single file with the extension .exe
We press the button further (nothing complicated, everything is done by itself) and flashing the modem.

2. After the firmware is completed, without removing the modem from the computer, go to the Device Manager, and check whether the drivers for the new hardware are installed.
If not, then install the driver from this archive.Attached fileFcSerialDrv_3Ginfo.RU.7z(437.03 KB)

or from this archiveAttached fileHUAWEI_Driver_5.05.01.00_3Ginfo.ru.7z(3.85 MB)

and there should be new devices in the COM ports section. It seems to have worked with the wood from the last file.

3. Then I downloaded the dc-unlocker, it was more convenient for me, I used it to enter terminal commands.
Downloading DC-unlocker client from here:https://www.dc-unlocker.com/downloads

Run the DC-unlocker client and click the Find Modem button. If the modem is not found, first restart the computer (or you can kill the process of the program by the task manager, because of it the modem may not be located).
If the modem is found, the DC-unlocker client will report this and at the end you can enter the command:
AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0

and press Enter.
Here ishereThere are other unlock options from rust3028

After that, the modem was unlocked. Now we fill in a fresh firmware by analogy with p.1
Attached fileHuawei_E8372h-153_Firmware_21.180.07.00.00_general_3Ginfo.ru.7z(66.05 MB)


We pull out the modem from the computer, insert the SIM card of another operator and insert the modem into the computer. Everything should work :)

Forgot nothing?

Post has been editedsvm - 10.03.16, 20:47
rust3028
Message#38
28.08.15, 13:04
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

t300t @ 08.28.2015, 12:25*
most likely, this is the stock

The drain is 21.210.03.00.143, and the firmware is 21.180.07.00.00, which is sewn after the unlock, is obviously older.

By the way, can anyone say - do the AT ^ NVRDEX / AT ^ NVWREX commands work on 21.180.07.00.00 or not?
t300t
Message#39
28.08.15, 13:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

rust3028 @ 08.28.2015, 14:04*
By the way, can anyone say - do the AT ^ NVRDEX / AT ^ NVWREX commands work on 21.180.07.00.00 or not?

What does the team do? I can check, but only tomorrow.
rust3028
Message#40
28.08.15, 13:26
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6650
Check in: 06.01.14

Reputation:-  2120  +

* t300t,
Reads and writes in NVRAM devices.
As I understood, in 21.210.03.00.143 many teams are blocked. Maybe in 21.180.07.00.00 differently?
t300t
Message#41
28.08.15, 20:05
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 07.02.08

Reputation:-  23  +

rust3028 @ 08.28.2015, 14:04*
By the way, can anyone say - do the AT ^ NVRDEX / AT ^ NVWREX commands work on 21.180.07.00.00 or not?

at
Ok

AT ^ NVRDEX
ERROR

at
Ok

AT ^ NVRDEX
ERROR

AT NVRDEX
ERROR
Huawei
 

740 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19, 05:35