[X]Assistant

[Winlocker]

DiscussionHuawei E8372 ( MTS 8211F )

Forewarned is forearmed! (link)

Attention!

It is impossible flashing modems with ALIEXPRESS ZONG / TELENOR without ADB:

Huawei E8372 (MTS 8211F) - Discussion (juster2 Post # 64927491)
Huawei E8372 (MTS 8211F) - Discussion (Post froll-72 # 64955165)
Huawei E8372 (MTS 8211F) - Discussion (Post sert55 # 65020137)

Recommended Modems for Acquisition

Photo device

Specifications

Specifications:

• GSM 850/900/1800/1900 MHz
  
• UMTS 900/2100 MHz
  
• LTE-FDD 800/900/1800/2100/2600 MHz
  
• Wi-Fi 802.11b / g / n
  
• Connect up to 10 devices via Wi-Fi.
  
• Support for microSD memory cards up to 32 GB.
  
• Two TS-9 connectors for connecting an external antenna.

Data transfer rate:

• LTE technology up to 150 Mbps
  
• DC-HSPA + technology up to 43.2 Mbps
  
• EDGE technology up to 236.8 Kbps

Modifications:

• E8372h-153
  
• E8372h-155
  
• E8372h-510
  
• E8372h-511
  
• E8372h-517
  
• E8372h-607
  
• E8372h-608
  
• E8372h-609
  
• E8372h-927

Frequency modifications.

Drivers

• HUAWEI_DataCard_Driver_6.00.08.00_Setup- HUAWEI DataCard Driver ("stick" drivers)
  
  
• FC_Serial_Driver_Setup- Driver for modem ports in HiLink
  
  
• set_hilink_switch_01- Switching control to a secondary, working USB composition in Windows (For HiLink modems and routers with USB, an alternative to MobileBrServ)

Firmware

• E8372h-153_Update_21.318.01.00.00_M_01.10_for_.143- Transitional firmware for MTS 8211F from rust3028
  
  
• Modified firmwareby rust3028
  
  
• Modified firmware for Zong and Telenor modemsby rust3028
  Attention! This firmware is for Zong (.306) and Telenor (.274) modems only.
  Installing these firmwares into regular modems will cause them topermanent lock on camera firmware Zong or Telenor.
  
  
• Modified web interfaces for HUAWEI modems, E8372H firmware and Usefulby jager911
  
  
• Modified firmware for E8372hby anvldko
  
  
• Modified firmware and interface for E8372h ZONG (.306) and Telenor (.274)by anvldko
  
  
• Transient firmwareby anvldko
  
  
• Modified web-interface based on WebUI 17.100.17.00.143by ilya-fedin
  
  
• The Restore button for WEBUI_17.100.18.03.143_HILINK_Mod1.21by jager911
  
  
• A selection of original (non-unbreakable) firmware for Huawei e8372h-153
  
  
• A selection of original (non-banded) WEBUI (WEB User Interface) web interfaces for Huawei e8372h-153
  
  
• The official "retail" firmware is 21.333.63.00.778 and WEBUI 17.100.20.02.778
  
  
• E8372 disc content

Instructions

• Unlocking the modem with a modified firmware (similar to 21.xxx.99.xx.xx.)
  
  
• Universal firmware manual E8372h-153 and E8372h-608
  
  
• Calculation of OEM and NCK codes, Backup, Unlock (UNLOCK), Change IMEI, Change OEM and SIMLOCK modem codes
  with stock firmware 21.180.xx.xx.nx / 21.210.xx.xx.nx, while maintaining the factory firmware, without the "Needle Method"
  
  
• Receiving OEM code and unlock code (SIMLOCK) while maintaining the factory firmware
  
  
• Access to AT commands, DATALOCK and receive OEM code.(similar to the modified firmware)
  
  
• Change IMEI on a modified firmware or official with unlocked AT-commands.
  
  
• Recover, change and dock MACWLAN [MAC address of WLAN] and IMEI [does not depend on the presence of a SIM card in the modem]
  
  
• Installation instructions for a modified web interface from ilya-fedin to Zong and Telenor modems.
  
  
• Instructions for the transition (without needles) to mod. firmware for modems with firmware below and including 21.316 ...(.143 - throughtransitional)
  
  
• Needle method.(If will be usedE8372h-153_Update_21.110.99.05.00it is recommended insteadE8372h-153_Update_21.110.99.05.00_nv01 )
  
  
• A radical option "Restoring a modem by erasing flash partitions via fastboot"
  
  
• Various ways to change IMEI

Useful

• Using Caps and Topic SearchHuawei E3372 (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153)for E8372h

  
  Since E8372h and E3372h are on the same Balong V7R11 platform, some utilities, scripts, drivers, etc. for E3372h from the topic "Discussion Huawei E3372" are applicable for E8372h, only firmware andbootloader (usblsafe_E8372h)need to use for E8372h.
  
  For example:
  
  

  • Modem recovery by erasing flash partitions via fastboot
    If the modem has stopped seeing the network, it has become unknown or an ADB device. Constant Error 21 when flashing to various operating systems and connected modem via USB 2.0 interface
    (Archive to takeE3372h _repair_01.rarKit to use as is - with the loader usblsafe-3372h.bin . Upon completion of the script download usblsafe-8372.bin as with the "needle method", it is not necessary to reload and close the contacts. )
    
    
  • Solving the problem with the emergency modem boot port in Windows 8.1 and Windows 10
    
    
  • How to open ports in HiLink (what to do if the flash driver gives error 10)
    
    
  • Kit for flashing through balong_flash
    
    
  • Sewing kit
    
    ... and much more .., well, if there is a choice: for E3372s or for E3372 h , then choose what is intended for E3372 h
    
    That is, the solution of some questions and problems on the E8372h can be found in the header and search in the topicHuawei E3372 (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153)

  
  
  
  
• Recommendations for choosing Huawei E8372
  
  
• Scripts for fast modem upgrades.
  
  
• ADB Installer
  
  
• VBS script to run the ADB server in the router(Login -root ; The default password is admin .)
  
  
• Setting and removing a password for accessing the Linux console via Telnet.
  Run the ADB server in mod. firmware with a password for accessing the Linux console via Telnet.
  
  
• The ability to access the Linux console, on modified firmware, through the port (not ShallB)
  and entering the modem into boot mode, if the AT ^ GODLOAD command is not supported
  
  
• Change device IP address
  Installing DNS servers sent by the modem via DHCP
  Decoding http://192.168.8.1/api/device/signal
  
  
• Script to execute AT ^ DLOADINFO?
  
  
• The real numbers of energy consumption E8372
  
  
• Photo of the internal modem.
  
  
• Photo of the internals of the E8372 modem in the analysis, with the screen removed
  

Post has been editedctich - 16.05.19, 17:05

Reason for editing: Addition and correction

[DarkStar51]

anvldko
I can not even put any error 19.

[anvldko]

DarkStar51,
Show modem data on dtsunloker

[DarkStar51]

anvldko
Here are the settings. And just going into error 19.
I can only flash this firmware
Update_WEBUI_17.100.20.00.03_HILINK_ISO_only

Post has been editedDarkStar51- Yesterday 22:27

[anvldko]

DarkStar51,
Hmm .. Try basic firstfrom here.
Also install the bush E8372hCUST-B01C00_general_05012PXV.rar
Further what you want. .

Post has been editedanvldko- Yesterday, 23:56

[alexlaz1982]

DarkStar51,
Why not ask for sections?
GodLog accepts?

[anvldko]

DarkStar51 @ 05/18/19, 10:16 PM

_HILINK_

this file for 3372 for E8372 should be _RE5_
lay out if not forget)))

Post has been editedanvldko- Today, 00:46

[alexlaz1982]

anvldko
He was stupid, everything is decided

[SiVeD]

I'm trying to backupof this instruction. Stage 6,I can not install ADB,Commands to activate the Linux console, AT ^ NVWREX command does not work = 50577,0,8,1,0,1,0,0,0,0,0,0,0
Before this stage, everything is done, the OEM code is found.

The modem was purchased in technopoint: characteristics of DC-Unlocker

Found Applications port COM11

Found modem: E8372
Model: Huawei AuthVer 4 modem (New)
IMEI: 8666 ***********
Serial NR. : B7Z ****** 1000586
Firmware: 21.210.03.00.778
Dashboard version: WEBUI_17.100.08.01.778
SIM Lock status: unlocked
Wrong codes entered: 0 (unlock attempts left: 10)

===================================================================
AT ^ DATALOCK = "25240668"


Ok

AT ^ NVWREX = 33,0,4,2,0,0,0

Ok

AT ^ NVWREX = 50577,0,8,1,0,1,0,0,0,0,0,0

ERROR

I ask for advice from respected members of the forum.

[dr_esin]

SiVeD,
Referring to the source
Huawei E8372 (MTS 8211F) - Discussion