Thank you, the procedure simply ....

Posted on 23/12/2016, 22:18:

And there is one who can finish Mui ????? all I made as described was on hda. always some sort of error with a window to send the report or cancel ..... o.O

Sanya, tell me please how this file shivanut :)

Prompt in what side? ported on the instructions:Porting firmware 4.2 / 4.4 on the MTK 6592/6582 (Post bars749 # 38802150)insertion port onoppo n3 color osI just lost hopethe normal operation of the network and Wifitook not want to start up due Warning NVRAM err: 0x10 Dump that finishes the novel P2 is not a ride that is I not solved the problem.not one fix did not help. even bear and vayfay. and on this video: https://youtu.be/PNSZWOCtxqsported Prosha gives a start. but as always one"BUT"speaks hoarsely errors Process of troubles with the core !? Calls do not go the media does not plow, etc. and etc.

: Thank_you: ----- VoTH CWM recoveryhttps://yadi.sk/d/z7FCl_ZV35oM3y And if not patched startonet Bout That: rolleyes:https://yadi.sk/d/KHqzZpxM35oNbpUse Booth with firmware runoff ----GSmart Roma RX_V1.13.07Here's more on website


Roma-RX_boot_patched.img(5.49 MB)
Roma-RX_CWM4__recovery.img(6.15 MB)

The first port SM12.1 only the beginning of the test start normalnС–y .... only the phone's memory was gone ... I'm not the author !!!! just pereportiroval chtobС– bС–l start he only started learning .... no more SMS client and the Internet .....

https://yadi.sk/d/rqr6WtJV3AUDKo

Jaycobe Someone flashed already normal or not there is some sort of port?

Stock firmware under fleshtul + nvram under fleshtul

Version 1.13.07, all native

https://yadi.sk/d/eEtGvGnj3H8YZp

Hey. Can somebody explain on fingers how to install CWM? It is desirable in detail, for those who are in the tank.

Poor ogre,
koreche as follows: 1 Set during these 2 tools. smart - Root + Zhushou + [1.5.1] .apk and checkmark on busyBoxneizvesno sourcesput on yusb enable debugging and developer mode ...

3 further set cleaved,
4, restart the computer,
5 go to the phone to a new poyavivscheesya application and give ADB program root.
6 Turn off the phone.
7 Then konekt --------

podsoedenyame phone while holding the key on and the sound (-), and so a few times DownloadMTC droid TULZyou open a program and plug the device into nomralnom turned on. left NIDA will ulu status konektviolet color. and it says you should probably get rootsheel vremmenny Rutt. press Yes. and get Ruth. then make bikam bear nvram. and Zaitov the tab - Recovery AND BOOT and choose to use the phone, it will compile and ask you rekaveri sew his consent .... --- bottles too patched and throw in a folder with prog ---- Bikapo rekaveri and HB frames .. . Good luck !!! So I did exactly 25 times and is always normal !!!!


Root + Zhushou + [1.5.1] .apk(11.36 MB)
BusyBox_ Pro _v25-spaces.ru.apk(2.61 MB)
MtkDroidTools_v253.zip(9.14 MB)


Post has been editedJaycobe - 30.05.17, 13:00