[X]Assistant

[tlt_dk]

DiscussionBeeline Tab Pro
Beeline Tab Pro, Beeline Tab Pro
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

Screen:S-IPS, 7 ", 1024x600, touch, capacitive, multitouch
The Internet:HSDPA 21.1 Mbps, HSUPA 5.76 Mbps, EDGE
Wi-Fi:b / g / n, 2.4 GHz
OS:Android 5.0 Lollipop
Iron:1.3 GHz, MediaTek MT8382, 4 core Cortex-A7, Mali-400MP2
Memory:RAM 1 GB, ROM 8 GB, microSD up to 32 GB
Battery:Li-Ion, 3000 mAh
Weight:260 gr
Dimensions: ?
A photo:3.2 MP, no flash, no autofocus, front: 0.3 MP
Music:MP3 player, 3.5 mm audio output
Bluetooth:v4.0, A2DP
Navigation:GPS, A-GPS

A photo

Useful information

The first more or less decent tablet from Beeline. The previous two were frankly weak. There is at least an iron filling - a good average level. Plus built-in 3G and GPS modules. The camera, as is usually the case with tablets, happens no. The battery is average. Fresh Android. 3490 rubles + 1600 rubles (communication services) at the time of the start of sales. Gray and black colors.
Announcement: 2015, June

useful links

Test Recovery TWRP 2.8.7.0
Carliv CWM Recovery
Affordable tablet and something else
Tablet new line of branded devices from Beeline.
The first carrier tablet with Android 5.0
Unlock in a simpler way, without root and third-party programs, based on data from hscc

Instructions

Change have
How to become a developer
One way to get Root
Engineering menu
both FREE and UNIVERSAL unlock from BEELINE.

Firmware

Beeline-Tab-Pro_150611_ForFlashtoolFromRea
Beeline Tab Pro Firmware 2015.04.22 MT6522 under SP_FLASH_Tool

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedMgalex - 05.06.17, 18:43

Reason for editing: Unlock easier way, without root and third-party programs, based on data from hscc

[VolanD_vlz]

Yes, we read. Only here on what you advise swears and chrome and Casper. Because it is not sure about this method.

[juho.iloinen999]

I can’t do anything with screw tricks, the root is even obtained when flashing from a virtual machine from under Mac

here is the topicwhere the same url appears
therefore, without fear you can go and rant

Post has been editedvsm778 - 21.07.15, 18:27

[VolanD_vlz]

Will root from this site work normally link2sd?

[evgeniyvik]

Bought recently. Good tablet. RTH GOT FOR 5 MINUTES -KINGROOT (ohm). REQUIRED AIR UPDATE.
I can not take out the recovery. Has anyone tried it?
Yeah ... when you work, kinggut needs internet!
KingRoot (Post by maksnogin # 41273255)

Post has been editedevgeniyvik - 25.09.15, 08:59

[evgeniyvik]

Be sure to do an update on the air.
Next, go to the settings, o phone, and at the lowest graph we tap many times, until the message that you are a developer appears. You can stick it on the build number :)
A line of development will appear, and you can turn it on.
So on most androids. I turned it on right away.
--
Developer menu, you can enable only after the air update.
In the cap.

Post has been editedevgeniyvik - 25.09.15, 08:58

[HEKTO with phone]

Does Ruth work for him normally? Well, are all root features available (link2sd)?

[evgeniyvik]

HEKTO with phone @ 07/31/2015, 13:28

Does Ruth work for him normally? Well, are all root features available (link2sd)?

Ruth is almost normal. The Lolipo 5.0 system is self-terminating. Therefore, after a drip in the system, the root disappears and kinggut re-gives a rut.
I changed the buildprop, so after the reboot the changes were restored, the root disappeared, but you run kinggut and all the rules.
I pulled out the recovery turned out the image of 200mb! Unpacked looked like all the rules, packed without changes received 4.75mb! I stitched and repacked it because mtdroidtools does not see the tab and the adb also does not see the festbu sees vi7.!
Who wants to dig, I can lay out the recovery.
Yeah link2sd I think it will work. I’m a lacipatcher, he does the same thing he takes by default to the application - it works.

Post has been editedevgeniyvik - 31.07.15, 17:43

[vaigor]

How to enter the engineering menu?

[evgeniyvik]

[email protected], 20:28

How to enter the engineering menu?

Ing menu * # * # 3646633 # * # * in the call dialer dial.

Post has been editedevgeniyvik - 01.08.15, 13:55

[vaigor]

evgeniyvik,
Pasib but about cwm for our device can not hear anything?

[evgeniyvik]

Here is the above unsubscribed. I can collect but who dares to install? Drivers are needed or only my mtdroid does not see it! Who sees it, then it is possible to reinstall recovery try! [Left]

[xoma949]

Tell people where to look for the firmware for this device?

[evgeniyvik]

Congratulate me! Bootlogo hung. But cwm is posting. URGENTLY MAKE A BACKUP AND PUT UP I REQUEST. It is worth on mt6582 (mt8382 is fake!). The same as tab 2, only the sections are redistributed. Recover flash flash tool (ohm) from beeline tab2
Beeline Tab 2 - Discussion (Post AVG_SAS # 38080192)
Drivers that tab 2. Tick only on the recovery leave. Cwm set myself after the hang on the boot. I rum so downloaded unsuccessfully. Scatter file lay out. Save.

[vaigor]

[email protected], 03:08

URGENTLY MAKE A BACKUP AND PUT UP I REQUEST

Something does not work, I set firewood from tab2, but the device is not defined

[evgeniyvik]

That's what I put.
It is better to remove others before installing. Then I opened mtk droid tools 2.5.3 and opened a com line in it. He entered adb devices, he determined the body by writing a number, then entered the adb shell and a request appeared on the tablet to allow debugging? - clicked yes! And the body was determined. Created a file scanner by clicking on the block map in the mcdroid. Next, I downloaded the firmware from tab 2 under the flash drive and in it replaced the rekameri on the km by renaming it. Turned off the body, launched the flash tool, chose the scanner from the tab about the firmware, and put the firmware in the flash drive folder, from the downloaded firmware, removed all the jackdaws except for the recovery, pressed the daunlod, connected the tab and waited for minutes3, and everything appeared ok. Entered the recovery and here he is. But before that I’ve read the backflash in the flashout he did Rom and after that the tab hung on the logo. He checked the recovery, he unzipped the zip tinium. But in the system there is some kind of failure, and the back-up for the KVM is needed.
I did not begin to repack kvm because mcdroid defines our percents as well as theirs and our system as deceptive. And 512imb ozu out of 1000 as a swap.!

Attached files

driver -tab-pro.zip(24.76 MB)


Post has been editedevgeniyvik - 02.08.15, 10:00

[vaigor]

evgeniyvik,
PPC, nothing happens neither so nor that brain already boiled in the evening I will try again

[evgeniyvik]

[email protected], 11:02

evgeniyvik,
PPC, nothing happens neither so nor that brain already boiled in the evening I will try again

Usb debugging is on, right? Of course yes?!
Okay ... already a brick :) Akum sat down and does not charge. I will try to sew from tab 2 a full firmware via flash drive ...... in general, I have two win7 ones. So, on one fig and on the second one, everything went wrong, but I regret what went on (or rather decided to merge the rum).

[dovgalev77]

Hello, tell me, but on the sd card in this tablet applications are not installed?

[vaigor]

dovgalev77,
No, you need to mount the partition on sd or do a memory substitution, read in the topic tab2, but so far we have nothing to do with it

[evgeniyvik]

Better to do nothing with him at all. I have a brick full. I carry on the guarantee :) there is a flash recovery-boot (like so), it restores the recovery of the stock machine. And my now even on the connection to the computer zero reaction. These are my pens :)