[X]Assistant

[jenova73]

DiscussionBeeline Pro 2
Beeline Pro 2
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

Beeline Smartphone Pro 2

Works on 2G networks (GSM 850/900/1800/1900 MHz)
3G (UMTS 900 / 2100MHz)
Data reception / transmission in 3G mode (HSPA +) up to 21.6 / 5.76 Mbit / s
Processor Quad-core MTK 6582M
1.3 GHz
IPS screen, multitouch, 4.5 inches, 480 * 854; color 16M
Memory 8GB ROM + 1GB RAM,
MicroSD support up to 32 GB
Standby time up to 180 hours
Talk time up to 3 hours
Camera 5 Megapixels (main), front - 0.3 MP
GPS Navigation
Optional FM radio, Bluetooth 4.0, Wi-Fi 802.11 b / g / n,
Charge via microUSB interface connector
3.5 mm headset jack
1700 mAh rechargeable battery
Available colors black, white

Useful information

Review, Beeline Pro 2 smartphone photo
Script remade to 2 sim cards with core
Root rights
Installation \ CWM Installation Instructions
Custom recovery for firmware via flash tool
A brief manual for getting root without a PC.
Unlock option
Recovery tips

Firmware

Flash firmware for Flash_Tool
ExeptionOs + Rebuild
DOOGEE_OS
Nexus_Rom Android Lolipop 5.1.0
ExceptionOS
EXCEPTION OS
ColorOS UI
Star os
AOSP V3
X-Pop for Beeline
NewBootRC1 for Beeline
BLU-ROMK
AOSP5_v3
Official Odex firmware v.006
CyanogenMod 12.1

Useful

Removing Sim Lock for Beeline Pro 2
Unlock code from the operator (per sample)
The script for automatically porting firmware MTK6582 with the kernel 3.10.54 to our device
Recovery TWRP 3.0
Installing a second SIM card in BEELINE PRO 2
Where to order a screen for this device
Restore bricks full system dump!
Brick repair (user experience)
Repair IMEI and MAC directly in NVRAM
Open the "developer mode"

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedRaveboy - 23.09.17, 06:36

Reason for editing: Developer Mode

[jenova73]

Comrades, discuss \ lay out who has what
If anyone can post backup firmware beeline
If someone has any information, links, everything will be useful.
Personally, I need help from those who have this smartphone.
I need a backup in order to revive the phone

[Sergey_Ace]

M

The topic has been moved to subsection “Other brands�
Since your phone is not yet in the DevDB database, you cannot add it to the description and select it in the profile.
You need to fill out an application for adding a device to DevDB at this address:http: //savagemessiahzine.com/ devdb / phones / new /

[322den223]

Please add BackUp Oooooo need)
P.s. When you start hanging logo, CWM Stitched!

Post has been edited322den223 - 30.07.15, 16:48

[Insulin32]

Backup of Beeline Pro stock firmware 2.
Ya disk

Post has been editedcherva70 - 01.08.15, 00:17

Reason for editing: In the header

[nikkov199525]

What is the kernel version of this phone?

[Insulin32]

nikkov199525,
3.10.54

[http999]

Good day, but I also have such a problem, manipulations with the flash tool and I have a brick: sveta: I can not recover from backup, problems with the preloader, help friends how to restore the phone? Or there is someone who can not find the stock firmware as I can, thanks in advance.

Post has been editedhttp999 - 06.08.15, 01:38

[proff26rus]

How to install CWM on Beeline Pro 2

1. Download the archive! CWM_Root_Beeline_Pro_2.rarand unpack into a separate folder.
2. You should get the following contents of the archive:
-

SP_Flash_Tool_exe_Windows_v5.1452.00.000 download

- folder with the correct version of the SP Flash Tool, i.e. flash driver for MTK devices
-mtk_xp_vista_7_8_x32_x64.zip- archive with drivers for the device MT65xx Preloader, PreLoader USB VCOM Port. By the way, all OSes are supported, i.e. I installed the driver data without any problems even on Windows 8.1 x64
-beeline_pro_2_cwm_recovery.img- CWM Recovery image for firmware via SP Flash Tool
-beeline_pro_2_stock_recovery.img- the image of the original (stock) recovery, if you suddenly want to return the stock recovery
-MT6582_Android_scatter.txt- Scatter file for flash driver containing partition markup
-UPDATE-SuperSU-v2.46.zip- ZIP file for installing SuperSU and getting root via CWM
3. As you can see, the archive is quite complete and represents a "repair kit" for all occasions. The first thing we do is run the SP Flash Tool (fileflash_tool.exein the same folder)
4. Immediately after launch, go to the bookmark.Downloadand push the buttonScatter Loadingwhere we choose our MT6582_Android_scatter.txt file. After that set a tick onRECOVERYand choose inLocationCWM image file(beeline_pro_2_cwm_recovery). Then click the Download button with the arrow. The program will go into standby mode to connect the device.
5. Turn off the phone(this is imperative, i.e. the phone must completely shut down). Then we connect it to the PC.
6. At the time of connection, you will determine the unknown device MT65xx PreLoader and the OS will offer you to install drivers for it. In the picture below it is clearly shown. It is better to open the device manager immediately before connecting the phone in order to “catch” the moment the MT65xx PreLoader appears. If the device appears, and the OS does not offer to automatically install drivers, then this must be done manually by clicking the right mouse button on the MT65xx PreLoader device.
7. Choose"Search for drivers on this computer"and specify the folder where the unpacked contents of the archive are locatedmtk_xp_vista_7_8_x32_x64.zip(i.e. by this point you have to unpack the archive somewhere). After the drivers are successfully installed, the picture in the device manager should change.
Those. The unknown device MT65xx PreLoader, after installing the drivers, is defined by the system as PreLoader USB VCOM Port in the "Ports (COM and LPT)" section. To proceed to the next step, you need to make sure that you have a virtual COM port on your system.
8. After that, the SP Flash Tool will go through the process of the Recovery firmware, it takes a few seconds. If the firmware process has not started, for example, if you installed the drivers too long after connecting the phone, disconnect the phone from the PC, re-set all parameters in the SP Flash Tool and click the Download button to wait for the phone to connect. Then connect the phone.
9. When the firmware is successfully completed, you will see the message Download OK.
10. You can disconnect the phone from the PC - CWM is stitched from you.


If instead of CWM you want to flash the original recovery, then insteadbeeline_pro_2_cwm_recovery.imgin the Location in the SP Flash Tool you need to selectbeeline_pro_2_stock_recovery.img.

We stopped at the fact that they asked CWM. Now, to enter it, with the phone turned off, hold the Volume UP button and press the Power button (power button). The volume up button must be held until the Select Boot Mode menu appears. The menu has three items - Recovery Mode, Fastboot Mode, Normal Boot. Navigate through the menu using the Volume UP button, select the menu item - Volume DOWN. Place the cursor on the Recovery Mode and press the Volume Down button. Then you will have the Beeline logo, and then the CWM menu.

Post has been editedproff26rus - 17.08.15, 16:32

[proff26rus]

If you need someone about installing Root I will write

[FaNtA_DDD]

Guys, while the phone flew to Moscow for examination due to glare *, I would like to know how to turn on developer mode, I work at Intellij Idea and debugging would help me a lot in this matter :)
* The light did not notice in the Beeline cabin, where the light in their cabin is so bright that it is simply impossible to notice it, but in the dark when checking the screen, there is such light ...

[proff26rus]

[email protected], 18:01

Guys, while the phone flew to Moscow for examination due to light *, I would like to know how to turn on the developer mode, I work at Intellij Idea and debugging would help me a lot in this matter

There are no USB layouts in this model!

[Manchadal_sparkle]

Has anyone tried to install any custom firmware on our phone? And then I somehow am afraid to put Smart 3 from everyones and what else is similar to pro2

[Insulin32]

[email protected], 17:58

There are no USB layouts in this model!

Everything is there, look bad. Download from the market progDeveloper optionsand you will be happy.

Post has been editedInsulin32 - 23.08.15, 09:45

[FaNtA_DDD]

Insulin32 @ 08/23/2015, 09:37

Download the Developer Options prog from the market

Thank you very much, I will soon pick up a replacement and deal with it all!

Post has been editedFaNtA_DDD - 23.08.15, 17:39

[alex_ssd]

The people at me empty windows on the main screen do not get them already 10

Posted on 08/27/2015 07:44:

Understood, a simple tweak)))

[FaNtA_DDD]

Gone these 20 days and I took the new device, but here's what I want to alert everyone, and it is better to copy and paste into the header as advice.

If you suddenly found a defect and decided to pass it on for examination (say that the state of the phone would be described in detail, just in case), and this is 20 days, then you should know one thing, 60-70% of you may simply not call the last day, and indeed in the following week. What should you do? And you should come to the salon, when the term has already expired and go to a free specialist, give him papers about sending the phone for examination and if you are told that he has not arrived yet, but you can allegedly write a claim, refuse and ask that if they had called those who took the phones for examination and requested a scan of the inspection report, well, Beeline’s experts would send them a scan of one of your three or two papers.

As a result, I bought the phone on August 6, on August 7, I passed it with the defect “Light in the upper right corner”, on August 27 I arrived and did what I described above. I advise you also to read the law "On Protection of Consumer Rights", from 18 to 22 article.

p.s. I heard from the conversation that they gave up the phone in vain, as if they themselves could have carried out an examination, because other people from Moscow do not want to do this, I cannot confirm or deny these words ...

Post has been editedFaNtA_DDD - 27.08.15, 22:38

[FaNtA_DDD]

Guys, no one can make CWM stock firmware?

[dokerdesign]

Horrible sensor, is everyone having a problem?

[vovan_83]

Does not catch satellites, an hour lay on the balcony, generally zero ...

[FaNtA_DDD]

Horrible sensor, is everyone having a problem?

Oh yeah, oh yeah ... What’s more, as I noticed, it’s a hike in the firmware because for me, just holding the finger, the menu is twitching, if it is only spinning up and down, left to the right there’s no such thing. So why is the firmware? Because such garbage does not always happen, it can disappear for a day, and it will appear for an hour, while I can reboot the phone and voila, everything, everything is fine ... Everything is too strange ... I would load Backup, and change it flash drive for 1 GB, and backup weighs 1.1 GB in maximum compression ...

Post has been editedFaNtA_DDD - 17.09.15, 19:56