TP-LINK TL-WR842ND - Discussion | [wifirouter] Discussion, firmware, problem solving



Rep: (15)
TP-LINK TL-WR842N / ND- Discussion
Attached Image
The forum decided to post images under the spoiler Attached Image

A photo:
Attached Image
Attached Image

Description:
TL-WR842ND is a multi-function wireless N Router with data transfer rates up to 300 Mbit / s, which ensures trouble-free streaming of HD-video, online gaming, Skype calls and fast transfer of files over the LAN. Multifunction USB port provides convenient work with the printer over a wireless connection and the ability to FTP-server configuration. Guest network with its own private access to your network for guest users, and VPN-tunnel function can ensure the security in data transmission between several local networks.
Specifications:
  • Wi-Fi speed - up to 300 Mbps
  • Wireless Standards - IEEE 802.11n / g / b
  • Frequency range - 2,400 - 2,4835 GHz
  • Interfaces - 4 10/100 Mbps LAN ports, 1 10/100 Mbps WAN port, 1 USB 2.0 port
  • Buttons Button - WPS / Reset (WPS function / reset), Wi-Fi ON / OFF button (on / off wireless broadcast)
  • Antennas - 2 removable omnidirectional antennas with 5 dBi gain
  • USB functions - Data storage / FTP / Media / Print server / 3G / 4G connection
  • Wireless Network Security - WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Encryption, MAC Address Filtering
  • Additional functions - NAT (network address translation), VPN traffic transmission (PPTP / L2TP / IPSec), SPI firewall, access control, 5 IPsec VPN tunnels, guest network
  • Food - 12 V post. current / 1 A
  • Dimensions - 192 x 130 x 33 mm
Firmware
Instructions:
Complete User Guide:
Restore or replace the router software:
  • 1. If there are no problems for users when switching from official to alternative firmware, an attempt to replace one alternative firmware with another may cause difficulties. For example, if you want to replace OpenWRT with DD-WRT (and other combinations), you will need to roll back to the factory software from the web interface and then upgrade to the desired one.
  • 2. This router is practically not killed (in terms of experiments with software), but a situation may arise when it is necessary to recover, but there is no access to the web interface. Then we do this (an example for revision v2, therefore the files are substituted for the revision corresponding to yours):time, two, three. Firmware for recovery via tftpd revision 3.
  • 3. Ways to replace the router software

3G / 4G USB Modem Compatibility Chart(stock software).
3G Backup Channel Setup(OpenWRT).
Examplerestore and configure the router (ver.1) with Gargoyle, NDIS modem (3372) + unlimited bonuses ;-)
Replacing the radiator in the TL-WR842ND v1
Connect OpenWrt / LEDE as a wifi client
DD-Wrt connection as a wifi client
We raise 4G connection on Openwrt
Differences from the team building ofmodemsandmen from openwrt
Collection of tips

The curator of the topic isN.o.F.a.c.e.


Post has been editedstp101 - 17.03.20, 17:25



Rep: (51)
guys, is it possible to carry out the task of Internet on the router through my usb-modem, as a matter of tplinke connect to the vpn?
If this is not possible at the factory firmware, advise how to be able to sew.
There used to be a router asus firmware padavan, there vpn connected for a couple of seconds, and is found only connection to wan port.

Version of the TL-WR842N (RU) v3

Post has been editedStickman - 23.08.19, 11:40



Rep: (74)
* Stickman , All have been described in the configuration file for ovpn openwrt:
uci set firewall.vpn.src = "wan"

Collection of tipsof hats. The choice of light guide in Russian and a bit outdated, and more in English.
Ps speed and performance are questionable - iron obscenities (although v3 like better)

Post has been editedghost1357 - 23.08.19, 15:16



Rep: (0)
Good day. Faced with the following problem: today, without a declaration of war, the router no longer see the modem. He writes that the modem is not poklyuchen. Initially, the problem was in the balance sheet at simkarty. But after recharge SIM cards earn nothing. Router spontaneous reset to the default settings. I stick to the PC modem, the modem operates. I stick to the router - is not defined. After updating the firmware of the router modem I began to be determined, but the modem IP address on the router and the Internet does not arrive. With another modem is working properly. More determined ceased device (DVR) according to the local network. The modem itself with the blinking lamp on the LAN connection.
Router: TL-WR842N v5 00000001
Modem: e3276s-920

Tell me, please, how to cure a router?

Post has been editedAntoxa_s - 27.08.19, 23:27



Rep: (370)
Antoxa_s @ 28.08.19, 1:26*
Router spontaneous reset to the default settings

So included in the Advanced Settings ->Work mode ->3G / 4G router mode!
Attached Image



Rep: (0)
kirandy @ 28.08.19, 01:59*
So included in the Advanced Settings ->Work mode ->3G / 4G router mode!

This option is enabled does not work anyway. I did reset to the default settings on their own. Does not help.
screenshots below
Attached Image

Attached Image




Rep: (370)
* Antoxa_s ,
The router does not receive an IP address from the modem, poking your modem.



Rep: (0)
* kirandy , The PC modem is properly determined. It works in haylink mode. When inserted into the CSS, the browser immediately opens a page of the modem.



Rep: (1179)
Antoxa_s @ 28.08.19, 2:26*
in the browser immediately opens a page of the modem.
What ip address from the modem?

Post has been editedvaleramalko - 28.08.19, 13:11
Reason for editing: typo



Rep: (0)
* valeramalko, 192.168.10.1



Rep: (1179)
Antoxa_s @ 28.08.19, 22:18*
192.168.10.1
at the router should be in a different subnet, the default is usually 192.168.0.1, you have a ip? if so, I wonder why is not getting ip from the modem.



Rep: (370)
valeramalko @ 28.08.19, 22:57*
in the router must be on a different subnet

It was he who wrote the address of the modem. And this is very strange, it Mamed address should be 192.168.8.1
valeramalko @ 28.08.19, 22:57*
The default is usually 192.168.0.1

It's in the router



Rep: (1179)
kirandy @ 28.08.19, 23:52*
It's in the router
about it, and it
kirandy @ 28.08.19, 23:52*
This Mamed should be 192.168.8.1
192.168.8.1 is not necessary, in my 3276-152 default 192.168.1.1 goes.

Post has been editedvaleramalko - 28.08.19, 21:59



Rep: (0)
* valeramalko I changed the address of the modem, everything worked. Address of the router 192.168.0.1. I found that other modem router does not want to work:
e8372h-153 haylink writes that connected the modem model does not define. Internet LED is lit on the router, but there is no connection. modem router address determines from a network router for some reason. Yip standard modem. 192.168.8.1.
E173 - in the first few seconds of the Internet has, then vanishes. I suspect on the operator, but there is still a sim card 10GB traffic for distribution.



Rep: (0)
kirandy @ 28.08.19, 23:52*
Mamed at this address should be 192.168.8.1
modem address can be changed in the settings. I changed to protect from prying eyes and hands



Rep: (1179)
Antoxa_s @ 29.08.19, 0:39*
modem router address of a router determines the network for some reason
it's like, the best screen show the connection status.



Rep: (370)
* valeramalko ,
Here screens, and the good of it.
TP-LINK TL-WR842ND - Discussion (Post Antoxa_s # 88369634)



Rep: (122)
The guys have a config OpenVpn, his vpihgut in the router to work with 4g modem?



Rep: (94)
Jedi Basil @ 30/08/19, 1:07*
The guys have a config OpenVpn, his vpihgut in the router to work with 4g modem
you can put openwrt, such as Golden Orb, and import the file there ovpn



Rep: (2)
Guys, advise please, firmware povsednev if runoff does not like it, due to the unstable operation



Rep: (445)
CampingFawte @ 30.08.19, 20:10*
due to the unstable operation
iron version !?

Post has been editedvovan26_ - 30.08.19, 18:40


Full version    

Help     rules

Time is now: 05/05/20, 12:01