185 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> TP-LINK TL-WR842ND - Discussion | [wifirouter] Discussion, firmware, problem solving
altiveus
Message#1
04.03.16, 17:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 137
Check in: 06.08.09
Oukitel U7 Pro

Reputation:-  15  +

TP-LINK TL-WR842ND- Discussion

Attached Image

The forum decided to post images under the spoiler Attached Image

A photo:
Attached Image
Attached Image

Description:
The TL-WR842ND is a multifunctional N-Series wireless router with data transfer speeds up to 300 Mbps, which guarantees uninterrupted HD video streaming, online gaming, Skype calls and fast file transfer over a local network. A multifunctional USB port provides convenient operation with a printer over a wireless connection, as well as the ability to configure an FTP server. The guest network provides separate access to your network for guest users, and the VPN tunnel function is able to provide security when transferring data between several local networks.
Specifications:
  • Wi-Fi speed - up to 300 Mbps
  • Wireless Standards - IEEE 802.11n / g / b
  • Frequency range - 2,400 - 2,4835 GHz
  • Interfaces - 4 10/100 Mbps LAN ports, 1 10/100 Mbps WAN port, 1 USB 2.0 port
  • Buttons Button - WPS / Reset (WPS function / reset), Wi-Fi ON / OFF button (on / off wireless broadcast)
  • Antennas - 2 removable omnidirectional antennas with 5 dBi gain
  • USB functions - Data storage / FTP / Media / Print server / 3G / 4G connection
  • Wireless Network Security - WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Encryption, MAC Address Filtering
  • Additional functions - NAT (network address translation), VPN traffic transmission (PPTP / L2TP / IPSec), SPI firewall, access control, 5 IPsec VPN tunnels, guest network
  • Food - 12 V post. current / 1 A
  • Dimensions - 192 x 130 x 33 mm
Firmware
Instructions:
Complete User Guide:
Restore or replace the router software:
  • 1. If there are no problems for users when switching from official to alternative firmware, an attempt to replace one alternative firmware with another may cause difficulties. For example, if you want to replace OpenWRT with DD-WRT (and other combinations), you will need to roll back to the factory software from the web interface and then upgrade to the desired one.
  • 2. This router is practically not killed (in terms of experiments with software), but a situation may arise when it is necessary to recover, but there is no access to the web interface. Then we do this (an example for revision v2, therefore the files are substituted for the revision corresponding to yours):time, two, three. Firmware for recovery via tftpd revision 3.
  • 3. Ways to replace the router software

3G / 4G USB Modem Compatibility Chart(stock software).
3G Backup Channel Setup(OpenWRT).
Examplerestore and configure the router (ver.1) with Gargoyle, NDIS modem (3372) + unlimited bonuses ;-)
Replacing the radiator in the TL-WR842ND v1
Connect OpenWrt / LEDE as a wifi client
DD-Wrt connection as a wifi client
We raise 4G connection on Openwrt
Differences from the team building ofmodemsandmen from openwrt
Collection of tips

Topic Curator: Topic with no curator


Post has been editedAndrewP_1 - 11.03.19, 16:26
Reason for editing: OpenWrt Attitude Adjustment Firmware 12.09 TL-WR842ND (v1.x / 2.x) from yohimba
egen1980
Message#42
09.01.16, 16:40
Veni vidi vici
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2242
Check in: 01.02.11
Honor Play COR-L29

Reputation:-  204  +

* timius1,
He needs a default password from the waffle to
get rid of a sabzh ... Because There is no possibility to connect by the lanyard ...
* Peugeot339
I'm afraid nothing will help you ... only the cable ...


--------------------
"it was insulting to find out that the one to whom I am calling DOES NOT SEE that I am calling from AYPHONE ..."
Peugeot339
Message#43
09.01.16, 21:23
Status ...? what for?
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1087
Check in: 30.03.11
Philips Xenium V387 Standart

Reputation:-  107  +

Egen1980 @ 01/09/2016, 16:40*
Peugeot339
I'm afraid nothing will help you ... only the cable ...

Um: scratch_one-s_head: this is what you? o.O


--------------------
Philips XeniumW6500V387 MiuiPro Develop
Lenovo IdeaTab A3300 4.4.2 (HV) Dalvik, stock + root + GB
altiveus
Message#44
11.01.16, 14:21
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 137
Check in: 06.08.09
Oukitel U7 Pro

Reputation:-  15  +

Peugeot339 @ 01/09/2016, 23:23*
Um: scratch_one-s_head: this is what you? o.O

You need to connect the LAN1 interface of the router cable to the network card of the computer. In this case, you can connect to the webmord of the router (for the official firmware in the browser's address window, dial 192.168.0.1) and change the wireless network password to your own.
This is probably the only option for you.
Egen1980 @ 01/09/2016, 18:40*
I'm afraid nothing will help you ... only the cable ...


Post has been editedaltiveus - 11.01.16, 14:24
dmitrimalik77
Message#45
11.01.16, 14:39
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1421
Check in: 17.07.13

Reputation:-  47  +

Peugeot339, your password did not fit alas
Peugeot339
Message#46
11.01.16, 18:52
Status ...? what for?
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1087
Check in: 30.03.11
Philips Xenium V387 Standart

Reputation:-  107  +

* altiveus,
* egen1980
My friends, you hardly drove me into a stupor ...: D You, if you give advice, then be careful, the problem is not with me, but with* dmitrimalik77: yes2: ...
* dmitrimalik77,
Alas, what could ...


--------------------
Philips XeniumW6500V387 MiuiPro Develop
Lenovo IdeaTab A3300 4.4.2 (HV) Dalvik, stock + root + GB
altiveus
Message#47
12.01.16, 06:31
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 137
Check in: 06.08.09
Oukitel U7 Pro

Reputation:-  15  +

: rofl: Indeed the confusion came out.
DI_MMA
Message#48
12.01.16, 18:38
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 19.11.15
Wileyfox swift

Reputation:-  10  +

I bring to your attention a new firmware based on the newest kernel OpenWRT 15.05 Chaos Calmer for the TL-WR842ND (RU) v2 router

Firmware was built with compiler flags for TL-WR842ND v2. When flashing to the first revision, get a corpse.

I was preparing to work with 3G modems.
All modems that used, work without failures and gaps. I collected from source for myself, tested and set up myself.
Firmware version
Firmware version
OpenWrt Chaos Calmer 15.05 / LuCI (git-15.363.78009-956be55)
Kernel version 3.18.23
Openwrt revision 48207 sources from 01/12/2016

Revision is the most fresh
The firmware works almost perfectly.
The previous revision (did not save the number) from 09/12/2015 worked with a bang until today with one single reboot of the router !!! New revision with updated codes should work even more stable.

Features of the firmware
Supported Connection Types
  • PPPoE
  • PPTP
  • L2TP
  • 3G / 4G - the maximum number of drivers is included, including RNDIS modems (with a web interface for configuration), as well as packages for automatic switching of the device mode
  • Native ipv6

Services as part of the firmware
  • LuCI - WEB-interface
  • p910nd - Service for connecting the printer and using it as a network
  • hd-idle - automatic shutdown of a connected hard disk (parking heads) when it is not in use
  • udpxy - proxy service for multicast
  • UPnP - service for automatic port forwarding for supported software (for example, Skype clients, BitTorrent, DC ++)
  • Samba - a service for creating "network drives"
  • Transmission - BitTorrent Client
  • MultiWAN - service for automatic balancing of Internet traffic over several Internet connections.

Supported File Systems
The firmware supports the connection of USB-drives with file systems:
EXT2, EXT3, EXT4, VFAT, NTFS, DOS

All actions at your own risk!
Firmware files
Firmware files
factory- to switch from official firmware to OpenWRT
sysupgrade- to update the already installed OpenWRT firmware
Backup- this is a fully configured router for receiving Internet from a 3G modem (there is no wired Internet, but, most likely, it should work), the DHCP server is on, Wi-Fi access point.

Backuprestore after firmware to System - Backup / Restore in the Restore Backup section.
Access Point Name: TP-Link
Password on the access point: 12345678 (then change to a more complex for security purposes
Username and password for admin panel: root


Attached images
Attached Image


Attached files

Attached filebackup-OpenWrt-2016-01-12.tar.gz(11.5 KB)
Attached fileopenwrt-ar71xx-generic-tl-wr842n-v2-squashfs-factory.rar(5.86 MB)
Attached fileopenwrt-ar71xx-generic-tl-wr842n-v2-squashfs-sysupgrade.rar(5.86 MB)
DI_MMA
Message#49
14.01.16, 08:26
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 19.11.15
Wileyfox swift

Reputation:-  10  +

I bring to your attention a new firmware based ontestkernel OpenWRT 16.011 Designated Driver for TL-WR842ND (RU) v2 router

I was preparing to work with 3G modems.
All modems that used, work without failures and gaps. He did for himself, tested and set up himself.

Version
Firmware version OpenWrt Designated Driver r48225 / LuCI (git-16.011.51706-81e80c4)
Kernel version 4.1.15
Openwrt revision 48225 from 01/13/2016

Attention, this firmware is collected from the source codes supplied via the trunk channel, these are the newest and latest developments, but unexpected glitches are possible. If you feel confident that if something happens, restore the router yourself, you can flash it.

Changes

  • The firmware works faster than the official "stable" version, but, given that this is still a test
  • The new firmware interface in the Material style (like in iOS9 or Andriod 5 and 6), but, frankly, does not hold out

Features of the firmware
Supported Connection Types
PPPoE
PPTP
L2TP
3G / 4G - the maximum number of drivers is included, including RNDIS modems (with a web interface for configuration), as well as packages for automatic switching of the device mode
Native ipv6

Services as part of the firmware
LuCI - WEB-interface
p910nd - Service for connecting the printer and using it as a network
hd-idle - automatic shutdown of a connected hard disk (parking heads) when it is not in use
udpxy - proxy service for multicast
UPnP - service for automatic port forwarding for supported software (for example, Skype clients, BitTorrent, DC ++)
Samba - a service for creating "network drives"
Transmission - BitTorrent Client
MultiWAN - service for automatic balancing of Internet traffic over several Internet connections.

Supported File Systems
The firmware supports the connection of USB-drives with file systems:
EXT2, EXT3, EXT4, VFAT, NTFS, DOS

All actions at your own risk!
Firmware files
Firmware was built with compiler flags for TL-WR842ND v2. When flashing to the first revision, get a corpse.
factory- to switch from official firmware to OpenWRT
sysupgrade- to update the already installed OpenWRT firmware
Backup- this is a fully configured router for receiving Internet from a 3G modem (there is no wired Internet, but, most likely, it should work), the DHCP server is on, Wi-Fi access point.

Backup to restore after the firmware in the System - Backup / Restore in the Restore Backup section.
Access Point Name: TP-Link
Password on the access point: 12345678 (then change to a more complex for security purposes
Username and password for admin panel: root


Attached images
Attached Image


Attached files

Attached fileopenwrt-ar71xx-generic-tl-wr842n-v2-squashfs-factory.rar(6.22 MB)
Attached fileopenwrt-ar71xx-generic-tl-wr842n-v2-squashfs-sysupgrade.rar(6.22 MB)
Attached filebackup-OpenWrt-2016-01-13.tar.gz(11.5 KB)
Sash153
Message#50
15.01.16, 11:52
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 627
Check in: 10.04.11
Samsung Galaxy J5 (2016) SM-J510FN / DS

Reputation:-  47  +

Someone configured ip tv operator qwerty or similar. I'm interested in udpxy and firewall. And better skinte backup, please.
P.s. There is no TV at home yet, I would like to watch ip tv antennas from qwerty on the tablet, but the old galaxy tab 2 7.0 android 5.1.1 does not support multicast, which even works on native firmware tp-link 842

Post has been editedSash153 - 16.01.16, 20:17
rublik2009
Message#51
17.01.16, 10:58
Guru
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 2085
Check in: 21.07.13

Reputation:-  26  +

What are the differences: TL-WR842ND and TL-WR842ND (RU)? It seems that this TL-WR842ND (RU) is being examined here and I ask you to add the word to the topic (RU)
I was preparing to work with 3G modems.

I ask you to do it for 4 G. So that after you turn on the modem (Fly, Yota). Although there is such in the description:
3G /4G- included the maximum number of drivers, including RNDIS-modems

Before flashing, learn to make a backup, so as not to get a corpse and return the old working firmware
And I ask you to attach the Instructions -How to flash (under the spoiler)

Post has been editedrublik2009 - 17.01.16, 11:12


--------------------
egen1980
Message#52
17.01.16, 12:23
Veni vidi vici
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2242
Check in: 01.02.11
Honor Play COR-L29

Reputation:-  204  +

* rublik2009I will say from experience ... They don’t seem to differ in anything ... Apart from the presence of the Russian language ... Firmware are interchangeable ... And the revision in the cap name is indicated ...
* Peugeot339, I apologize, I can see it, and did not recheck who I wrote ...)


--------------------
"it was insulting to find out that the one to whom I am calling DOES NOT SEE that I am calling from AYPHONE ..."
Peugeot339
Message#53
17.01.16, 14:01
Status ...? what for?
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1087
Check in: 30.03.11
Philips Xenium V387 Standart

Reputation:-  107  +

Peugeot339, I apologize, I can see it and did not recheck who I wrote ...)

All bunch: friends:


--------------------
Philips XeniumW6500V387 MiuiPro Develop
Lenovo IdeaTab A3300 4.4.2 (HV) Dalvik, stock + root + GB
vray
Message#54
17.01.16, 14:58
Tutoshny
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 852
Check in: 01.10.10
Apple iPad

Reputation:-  68  +

I will share my impressions. I first bought a zuxel kinetic 4g, but to connect a modem, it needs an Internet connection via a cord for setting and swapping modules. Spat and changed to this one. Everything started out of the box, the setting is 2 minutes, taking into account the unpacking. Unlike the first revision, this one does not heat up and it looks like a different stone, the article has come across somewhere. The speed at the whistle is about 12 megabits. Just waffle repeater picked up the old dir300 with open firmware.

Post has been editedvray - 17.01.16, 14:59


--------------------
DI_MMA
Message#55
17.01.16, 19:19
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 19.11.15
Wileyfox swift

Reputation:-  10  +

Attached Image

Screen about the firmware process.
Enter the System - Backup / Firmware

Post has been editedstp101 - 17.02.17, 23:51
Reason for editing: Spoiler
DI_MMA
Message#56
17.01.16, 19:32
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 19.11.15
Wileyfox swift

Reputation:-  10  +

I noticed a bug in the beta firmware, because of which I rebooted the router with a stable firmware a couple of times: the Internet and all network resources (the shared folder, the Internet) are working properly, and when you select an item in the admin panel, each time prompts for a password to enter. It only helps to turn off the power of the router and then turn it on.
Here it constantly arises.
I still do not understand what can provoke it. Previously - after updating the list of packages through putty.

I also noticed that the firmware does not seem to roll back to the previous release or kernel !!! With beta, I could not get back to the previous release and stable firmware. But does not mean that it is impossible. Well, for example, on the official, and from the official on OpenWRT 15.05
Keep that in mind.

Post has been editedDI_MMA - 17.01.16, 19:33
altiveus
Message#57
18.01.16, 07:02
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 137
Check in: 06.08.09
Oukitel U7 Pro

Reputation:-  15  +

Well, for example, on the official, and from the official on OpenWRT 15.05

Everything is exactly that way with the rollback to the official one and without any refinements (like tftp) and sewed this box 100,500 times.
DI_MMA
Message#58
19.01.16, 20:00
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 19.11.15
Wileyfox swift

Reputation:-  10  +

Hey. Now OpenWRT firmware for TP-LINK TL-WR842ND V2 router will be uploaded and updated on the sitehttps://sites.google.com/site/openwrt1router

I ask everyone there
AleZPro
Message#59
19.01.16, 20:42
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 650
Check in: 11.09.10
Blackview BV7000 Pro

Reputation:-  60  +

* DI_MMA,
And what about the bridge for iptv?


--------------------
So that the masters were afraid, he knows a lot of scary words!
poezdatik
Message#60
21.01.16, 00:25
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 23.04.09
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  1  +

I support the previous forumchanin about the multicaste, how to configure?


--------------------
JoKeR_13
Message#61
21.01.16, 12:47
Visitor
**
[offline]

Group: Active users
Messages 22
Check in: 07.12.09
Samsung SGH-i740

Reputation:-  0  +

I noticed a problem on the official firmware: the media server on the PC does not see the LG TV when it is connected via Wi-Fi. If the telly is connected with a cord, everything works fine.

185 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 15:36