Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Honor 4C / Honor 4C Play / G Play Mini - Firmware |
Message#22 28.07.15, 23:19 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 5434 Check in: 06.03.13 Huawei P30 Pro Reputation: 1377 | whether those who did not get into the number of beta testers can update Who will arrive ota, it must be loaded into the phone BUT DO NOT INSTALL, but first connect the body to the computer and into the internal. memory find folderHwOUCwhere the OTA will be loaded (most likely in the form of an archive, then we do not unpack it). Accordingly, from this folder, copy the update package to the computer and post it for us (to the forum), and then install it with a clear conscience. ZY It turns out alreadyfliesto someoneB302 Post has been editedIrakliCH - 29.07.15, 00:33 -------------------- Huawei P30Pro VOG-L29 9.1.0.120C10 |
Message#23 29.07.15, 17:12 | |
- Where are you? - Everything is there! [offline] Group: Banned Messages 17134 Check in: 24.09.07 Oneplus 3 Reputation: 2770 | 13RaveN, NeXan87, M Your questions have been moved to the topic.Huawei Honor 4C - Battery Problem Solving Post has been editedolegusss - 29.07.15, 17:13 -------------------- NitrogenOS 9 PIE World soldiers memorized literally The only paragraph of the world statute: Observe only one law. Who is stronger is right! ©What happens to the curators? |
Message#24 31.07.15, 11:15 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4789 Check in: 12.12.08 Honor 10 Reputation: 889 | The Malaysian website has beta 5.1 EMUI 3.1 for our device: The firmware itself:hereand downgrade:here Loading mirror Attention! The update can be done only with the 70th firmware. You can roll back to the 63rd version of the firmware (judging by the update guide for off) The battery must be charged at least 30%, the SD should be free at least 4GB. You can upgrade as a local update, and three buttons. How to upgrade to Malaysian 5.1 beta from the factory firmware: (in detail, that would not be wrong) It will take the 70th firmware from the header and the latest beta 5.1 from the Malaysian site. 1. Unpack the 70 firmware from the header, drop the dload folder into the root of the sd card. SD should be free at least 4GB. The battery must be charged at least 30% 2. Install the update via the "Update" settings item - "Local Update" 3. We load the phone, we upload UPDATE.APP from the vendor folder to the dload folder in the root of the sd card. 4. Again, install the update through the Settings item "Update" - "Local Update" 5. Unpack the firmware with android 5.1, throw the dload folder into the root of the sd card. 6. We make a local update through the settings. Enjoy! Post has been editedGluk41 - 12.09.15, 15:17 Reason for editing: In the header. |
Message#25 31.07.15, 13:31 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4789 Check in: 12.12.08 Honor 10 Reputation: 889 | Just updated to 5.1 Everything went without problems, put the update as a local update. All my data, settings, programs and settings slave. the table remained. Only the kingger and the root disappeared with him Screenshots: Screenshots of the firmware and the main differences While all for half an hour of use. The phone first slowed down, now flies. Updated for quite some time. Until the evening I look like this, in the evening I will pump the firmware over again, completely with a complete reset. I think it's worth it. Call recording never appeared. Post has been editedGluk41 - 12.09.15, 15:18 Reason for editing: In the header. |
Message#26 31.07.15, 13:41 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 88 Check in: 06.01.09 Samsung Galaxy A50 Reputation: 13 | |
Message#27 31.07.15, 13:58 | ||
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4152 Check in: 07.10.09 Reputation: 745 | Guys, I need help ... I found something here about sprinkling, but as usual there is no information. The help of those who are well versed in the android and the structure of the firmware in particular is desirable. I recall that the brick when connected to USB is still somehow determined by the system. I decided to forward this device in Linux installed in a virtual machine. Next, I found a board for crafts on the processor HiSiliconhttp://m.blog.csdn.net/blog/manfeel/44588665- HiKey96. In the same place it is written about the boot script. And do not believe it - but it somehow worked Honestly, I did not expect this ... now, as I understand it, I have poured the image of fastboot somewhere. But the fact is that most likely the addresses where the images lie are different from the phone and this board. Can someone help find out the dump of our firmware in the phone's memory with addresses? Or maybe I did not climb into that steppe at all? -------------------- without a signature | |
Message#28 31.07.15, 18:14 | |
Follow the dream [offline] Group: Friendssavagemessiahzine.com Messages 3505 Check in: 25.04.12 Reputation: 763 | michfood, P / S. Check the screenshot of how it works (5.1 | 3.1). The screenshot should be made with 2 fingers. (You need to slightly bend the fingers into a fist and knock on the screen with two bones.) ZY All successful testing. I haven't received anything yet (I hit the top 200 first) З.Ы2 on the mail while silence. ZY3 Test not in such a way. Posting changes is so-so. Want to rework the interface from EMUI or whatever it is - also crazy. It is only necessary to take into account errors and not refinement. accordingly zayuzat the whole unit from and to. З.Ы4 Successful testing. We are waiting for the 4th. Post has been editedura_aktobe - 31.07.15, 18:18 -------------------- 4Be yourself - and everything will go as it should. |
Message#29 31.07.15, 18:16 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4152 Check in: 07.10.09 Reputation: 745 | In general, if anyone is interested - I think there is a way to restore the body, and quite interesting - it seems to me that the fastboot is loaded into the phone’s memory through the Serial Com Port, and then it should start right from the memory and flash all the necessary partitions for recovery. somehow so in general ...https://github.com/96b…ntation/wiki/HiKeyUEFI Post has been editedmichfood - 31.07.15, 18:19 -------------------- without a signature |
Message#30 01.08.15, 22:17 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 577 Check in: 03.11.13 Xiaomi Mi 4c Prime Reputation: 158 | And so my friends Honestly, I'm delighted with the 5.1 candy: P My impressions: 1- the interface has not changed much, the primary colors have changed, the curtain and icons 2-this is what the OS is now 64 bit, and the processor is also 64 bit and now it works to its fullest, since 4.4.2 OS was 32bit and the percent worked half, the evidence is lower 34800 is a lot On 4.4.2 I sometimes even gave out 26 thousand, the highest was 31200 And then stable, powerful34800 ! I am pleased: happy: And so, about the installation I also stumbled on a problem from the beginning, reflashed it with a stock one and it turned out stupid - EMUI 2.0, 1 oz, screen ... and blah blah, shorter than crooked How I installed it 1- withthree buttonsset70th firmware 2- in the same archive of the 70th firmware, I flashed the vendor folder, flashed locally 3- after, we put our long-awaitedLedinets5.1, also using three buttons And rejoice obnovochku P.S All your motivations onyour fear and risk Firmware for Beta testing For me, you can use it daily Butnot experienced users do not recommend installing it |
Message#31 03.08.15, 00:25 | |
a guest [offline] Group: Users Messages 5 Check in: 25.06.13 Sony Xperia Z5 Premium Dual Reputation: 0 | Good day. Updated today to the five poyuzal a bit ... but it became noticeably quicker, and the Internet runs faster, the sound is more pleasant somehow became ... and the most interesting - some new feature appeared in the menu for developers: Post has been editedsnekt @ - 03.08.15, 00:29 Reason for editing: The rules of the section "Android - Firmware" p.3.8. |
Message#32 03.08.15, 09:22 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 74 Check in: 05.10.14 Xiaomi Mi 5S 3/64 Reputation: 1 | I sewed through 3 buttons to a candy, got some kind of android 4.3 emui 2.0. I tried to flash again, the result is the same. Downgrade to 4.4 also does not plow. I made a request to unlock the bootloader, while waiting can someone tell me what else you can do. So, instructions for switching to 5.1 beta and possible jambs during installation ... if possible, bring it somewhere, admins) Installation 1. Download and flash through 3 buttons 70 firmware from the header. 2. Turn on the device and through the local update we flash the update.app file from the vendor folder (this file is in the folder with the 70th firmware in the vendor folder). After these manipulations in the number of the assembly in the branch about the phone, the 70th firmware should be highlighted, and not the ballong, etc. 3. Only after that, after 3 buttons we sew 5.1 beta ... should get up as it should ... without any EMUI 2.0, etc. If someone doesn’t install smoothly 5.1 and EMUI 2.0 is highlighted, then through 3 buttons sew the 70th firmware ... should become ... I personally checked 5 times exactly ... Well, after that, according to the instructions, a little higher. Post has been editedseregahaker - 03.08.15, 09:23 |
Message#33 03.08.15, 14:54 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 74 Check in: 05.10.14 Xiaomi Mi 5S 3/64 Reputation: 1 | I will share with the forum users small observations about the sound in the Malaysian beta 5.1.1. I always listen to the music in the Sennheiser CX 200 Street II headphones and through the Poweramp player (in the settings since version 4.4. I always turned on the preset bass and high and then hand-wound the bass and high in half because there was clearly not enough volume and saturation of sound and bass ) Now today, the hands have reached the test of music in headphones on beta 5.1.1. (I haven’t included music before) and was very surprised ... I turned on the preset bass and highs in the same Poweramp and the sound in the headphones became saturated with bass and high as I wanted, after I started to turn up the volume and lo and behold ... loudly It is became much higher than 4.4. and the purity of the sound and the saturation of the bass remained ... there are no rattles and drawdowns ... everything plays just fucking! |
Message#34 05.08.15, 10:16 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 198 Check in: 08.12.11 Reputation: 6 | roman1379, It is not clear where such considerations came from. The Chinese at Media Library and Android 4 have long been pounded on 8 cores, and the tablet itself was on Alvinner A80T - 4 A15 cores, 4 A7 cores. 45k in Antutu. Bit rate affects memory addressing, i.e. You can use more than 4 GB (Remember, for example, how on Windows XP only 3.25 GB of 4 GB was displayed on a 32-bit system). If 4 cores were turned off, and then they suddenly started working - a gain, at least in synthetics, would have to be, if not linear, then 50% exactly plus. For Antutu and synthetics - the application is optimized to load ALL kernels. So we believe - 30,000 parrots + 50% = 45,000. This is unlikely to materialize. Maybe because of the improved scheduler there will be a thousand or other increment, no more. Conclusion - all the kernels work, a few parrots can be added only because of the optimizations of the Droid. Post has been editedVikViktorovich - 05.08.15, 10:18 |
Message#35 05.08.15, 10:56 | |
a guest [offline] Group: Users Messages 7 Check in: 31.03.15 Reputation: 0 | VikViktorovich, That's right - the bitness of the OS affects the ability to address more than 4 GB of memory (which, in our case, is not relevant, and for smartphones as a whole, it will not soon be relevant). The ability to use 8 cores android capacity does not affect. But it is worth noting that in one 64-bit clock cycle the system can process a larger amount of data (by using numbers of a higher order), so the lolipop should be faster than kitkat, but this effect will be noticeable only in 64-bit applications (of which very little ). The reverse side of 64-bit - applications will take up more space in the memory, due to the longer addressing, i.e. With the same set of running applications, there will be less free memory in lolipop than in kitkat. Understand another myth about the cores of the Kirin 620 processor, which is popular here: allegedly 4 cores are energy efficient, and 4 are powerful ... there are 8 identical cores (built according to the Cortex-A53 architecture) with the same clock frequency ... t . when necessary, additional cores are simply included. |
Message#36 05.08.15, 14:35 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 343 Check in: 04.08.12 Huawei Mate 20 lite SNE-LX1 Reputation: 28 | [just_smile], Hardly. The letter says that only with 60, and as practice shows, not in vain. Therefore, yesterday rolled back in advance. Being on a crookedly set Malaysian 5.1, set immediately to 60 1) first merge intermediatedowngrade file, get acquainted with the manual from the archive. We roll it. 2) then merge 70 firmware. We sew. After each "update" just in case I make a wipe cache and format. 3) then we take the 60th firmware from the cap (I took the one that lies on Yandex) and sew it through 3 buttons. I threw the firmware on the SD-shku. 70, in my opinion, sewed through "Local Update" Post has been editedhunter_izv - 05.08.15, 14:53 Reason for editing: added an algorithm that worked for me -------------------- Motorola T2288>>Sony Ericsson T28s>>Samsung C100>>Nokia 6230>>Nokia 3230>>Iphone 3G>>Samsung Galaxy Ace S5830I>>Lenovo P780>>Honor 4c>>Honor 6c>>Huawei P Smart>>Huawei P20 Lite>>Huawei Mate 20 Lite |
Message#37 05.08.15, 20:13 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 65 Check in: 06.11.14 Reputation: 0 | _aktobe from the left firmware or miui M Check outForum Rules! 4.12. It is forbidden to create topics or messages that do not involve discussion, or involve personal correspondence with a specific forum member. Post has been editedOXALIS - 05.08.15, 20:17 |
Message#38 08.08.15, 16:03 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 65 Check in: 06.11.14 Reputation: 0 | I tried the nexus root toolkits program on the computer. It did not work ... I know it seems that on android 5.1 you need to install the file superSU .zip from recovery .. Attached files UPDATE-SuperSU-v2.46.zip(3.83 MB) |
Message#39 08.08.15, 20:56 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 52 Check in: 23.06.13 Honor 4C CHM-U01 Reputation: 18 | Friends! Perhaps it will be useful to someone and will relieve from some questions. All of the following, this is purely my personal experience with one phone, that is, IMHO. 1. The ability to install the firmware is provided by the VERLIST.IMG file contained in the firmware to be installed, which is a plain text file with a list of models for which this firmware can be supplied. Those. in VERLIST 70-that is CHM-U01 V100R001C00B060, it means it will be put on the 60th. In VERLIST 60-th is not CHM-U01 V100R001C00B070, then it will NOT be delivered to the 70th. I did not manage to flash the "necessary / correct" VERLIST separately via fastboot. Therefore, in the rollback instructions for the 60th version, you have to sew the entire CUST section. 2. After a rollback from 63, 70 to 60 - the phone becomes BalongV100R001C51B311. The correct name is present in the local.prop file of the CUST section, but it is apparently not picked up. The reasons are not known. Consequently, nothing comes through the air, when installing 5.1.1 beta RU manually, the phone remains Balong. Update to 5.1.1 gets crooked (EMUI 2.0, the left screen resolution and other amenities that have already been described). You can stick the corrected VERLIST into the APP package, but you need to sign it with the Huawei key, which, of course, is not. 3. Traces of root remain even after flashing with 3 buttons. You can check by downloading the phone to fastboot and executing the command "fastboot oem relock unlock_code_loader_boot" before getting root, I could get a bootloader with the status relocked. Now I get: FAILED (remote: root type is risk) Post has been editedalexanderpenza - 08.08.15, 21:11 |
Message#40 08.08.15, 23:26 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4789 Check in: 12.12.08 Honor 10 Reputation: 889 | When you turn it off / on, it sometimes falls out in fastboot & rescue mode. Recovery also does not start. Yesterday I caught the same joke. It is treated quite simply: 1) Transfer to fastboot mode. To do this, long press on the power, turn off the body and turn it on with the volume held down. The power supply after the appearance of the splash screen is released, but the volume is held until the victorious one - the body will first show the splash screen, then there will be a short vibration, then after a while the bodies will rebuild into the fastboot themselves. 2) We sew stock recovery from the cap. 3) We throw on the card the latest firmware that was on the body - 5.1 or 70, or any latest one, on which the body worked normally. I have only 5.1 Malaysia, maybe you will be different. 4) Starting the firmware process is done in the same way as the 1st point - we turn it on, holding both volumes to the winning one. The body will behave in the same way as in the first paragraph. Good luck. Post has been editedGluk41 - 09.08.15, 01:02 |
Message#41 10.08.15, 13:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 116 Check in: 11.04.12 Nokia Lumia 1020 Reputation: 14 | On imei account you can read heretyts |
mobile version | Now: 01/05/19 16:25 |