[X]Assistant

[Dmitryrp]

Marriage and RepairAsus zenfone 2
Asus zenfone 2
Description | Discussion пїЅ | Purchase пїЅ | Marriage and Repair пїЅ | Firmware пїЅ | Accessories пїЅ | Owners Club пїЅ

• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

This topic is intended to discuss issues related to the problems and defects and marriage of Asus ZenFone 2 smartphones.
We kindly request !! Specify the details of the problem in this topic, attach photos if possible.
To test the device, go to the calculator and enter,12345+=

Photo

The following defects are currently known:

Model-

Asus ZenFone 2 ZE500CL download

Model-Asus ZenFone 2 ZE550ML
1.Vibration does not work, when testing in the calculator, error code 1910.
2.From overheating of the battery on the screen, above to the upper right corner, when you press, rainbow streaks appear
Model-Asus Zenfone 2, 1.8 GHz, ZE551ML
1.The external speaker rattles (also in my opinion the volume is too small).
Model-Asus Zenfone 2, 2.3 GHz, ZE551ML

useful links

Official response
If at the dump the SIM cards offer to replace the motherboard
The problem with the SD card is solved by pulling the screws
Speaker Replacement and Compatible Speaker List
Solving the problem with a sim card in the first slot
Replacing a non-working vibration motor
Micro usb replacement
User experience repair
Solving the problem with the proximity sensor

There is a website for buying official parts.asusparts.ru
For Ukraine m.ua(Before buying, verify the originality of spare parts)

Topics Curatordendota
For questions about filling caps, please contactQMS

Post has been editeddendota - 24.11.17, 19:08

Reason for editing: Links

[lovesos]

diesel4522 @ 03.21.19, 14:13

After the phone fell, the vibration disappeared and the phone began to charge for a very long time. From 0 to 100% in 24 hours.

Vibromotor is attached to the bottom board. Charging connector on it. From it comes a cable to the upper motherboard, on the same SIM card and SD card. Accordingly, to begin with, distort the cable on the bottom board (there is a simple clamping connector). It does not help - there are already a lot of options, from replacing the cable + board and / or battery, to soldering SMB1357 elements, etc.

[Roman_cheb]

Good afternoon, the device ZE551ML, yesterday, the second Simka stopped working, the one that with 2g, turned on / off the flight mode, rebooted, there was no sense. If you swap the first SIM card from the second, the SIM is working, i.e., the slot does not work. IMEI is visible only to the first sim card, there is no sense to turn on / off through the double sim card menu, that there is a SIM card, and no, it displays "busy". I rebooted from wipe everything, it did not help.
I changed the sim card and flash drive, I also changed the bottom board with a usb port, it's no use, the second sim card slot does not work.
The most interesting thing is that when I call with one SIM card, I don’t hear and they don’t hear me, although with the test ".12345 + =" both the microphone and the ear speaker are working, the tests pass o.O
Could it be that the radio module of the second sim card flew away? Maybe someone like that?

[lovesos]

Roman_cheb @ 03.21.19, 18:22

Could it be that the radio module of the second sim card flew away?

If one SIM card without a reason stopped working, and the second was no longer audible, then it is quite likely. After all, everything else you have already tried. Here will help a special electronics engineer with a soldering station who knows where to poke a tester and how to warm things up as a multi-contact ...

[rusigor]

[email protected], 18:30

Here will help the special electronics engineer

But first, it's better to ask -Help fix the device- at the same time, it will be easier to find a specialist: yes2:

[kaleb2004]

Good day!

There was a problem with the spontaneous with the inclusion of the device.
Model ZE551ML, starts happily off during charging. Blok native, previously there was no such problem.

Tell me, please, what could be the trouble?

[lovesos]

Kaleb2004 @ 03/23/19, 10:09 PM

There was a problem with the spontaneous with the inclusion of the device.
Model ZE551ML, starts happily off during charging. Blok native, previously there was no such problem.

Turn on or off? Battery how old?

[kaleb2004]

lovesos,
Turns off, t9 fun as usual.
The battery changed about 3 months ago

Update: turns off only when charging through the NATIVE charger ...

Plus, periodically gives "incompatible charger", as with the left, and with native charging

[lovesos]

[email protected], 11:37

The battery changed for about 3 months on

The problem began after replacing the battery, or after the same 3 months?
Offhand, possible participants of the problem - charging, wire, bottom board, cable with SIM cards, battery ... And for a snack - charge controller SMB1357 (I met on technical forums mentioning that a different poltergeist, incurable by replacing parts, ultimately rests on it).

[mrgreeny]

People help!
I changed the module (along with the frame with Ali). I worked steadily for 3-4 days, then the touch began to fall off.
It began with a small vertical strip on the left. Restart - work norms for an hour and again like that. Reset to the factory - helped for an hour, then again. On nerves twisted, bent: D, etc. now phantom clicks and falling off vertical areas. Is it a Chinese marriage? And I finished it off? You never know, can there be a way to repair this or just a replacement?

[lovesos]

You may have damaged the train loop. I met here one mention that sometimes the board rubs the tail of the wheelbarrow in the bend area, and closes the tracks left without a protective layer. And the method of treatment, by gluing to the problem area, a piece of double-sided tape (double-sided as it is thick, and protects against further chafing). The man got rid of phantoms so much. But he didn’t have non-touchable zones ...

[kaleb2004]

lovesosbegan over time

I think everything will come to the last one, to the controller

[lovesos]

[email protected], 15:21

I think everything will come to the last one, to the controller

The Chinese have Ali, the main thing is to take their revision (two digits under the first line of marking). Some revisions are compatible - or rather, on technical forums / sections, they will prompt (or Yandex ask). You can unsolder dead from the donor, as an option ...

[derik536]

I repeat my request againbecause last time I didn’t get an answer, and the question hung in the void, maybe now who knows and will help:
"People, deviceZE551 (ASUS_Z00AD)firmwareWW 2.20.40.206_20170627from the cap [was originally5.0-2.13.40.13]. After flashing it, the sound in the telephone (upper-aural) dynamics (all norms in the lower speakerphone) has fallen heavily in all modes - in the telephone and in any tiv skype-vibe messengers. The speaker itself is the norm, since several purchased in return behave in the same way, on other devices they work perfectly. I doubt that this is a hardware (conversational part on the board) problem, I hope that it is software. Who will stick where to steer the phone speaker settings? "
It was originally:

After flashing it became:

[lovesos]

derik536 @ 04/04/19, 11:09

I will repeat my request again, because last time I didn’t get an answer, and the question hung in the void, who can now know and help:

And flash another, not? Obviously, no one answered, because others do not have such a problem ... No one gets worn out, and sews the last ... Stick BORETS ROM and don’t worry ...

[derik536]

lovesos "you do not know what to say efficiently - pass by silently" - this was written for you like.
Asus ZenFone 2 - Discussion (Post derik536 # 84107621)

[lovesos]

derik536 @ 04/06/19, 10:39

* lovesos, "you do not know what to say efficiently - pass by silently" - it was written for you like.

Different people advise you the same thing not in vain - but you are stubborn, you do not need any practical advice, you need to scratch your own CSW ...

[derik536]

lovesosread the discussion more attentively - the “people” advised each time a different one and the topic of reflashing disappeared like smoke, and you decided to repeat it again.

[GeniusBo]

Who ordered the display module on ZE551ML? Throw off the verified link.

[lovesos]

derik536 @ 04/06/19, 17:18

* lovesos, read the discussion more attentively - the "people" advised each time a different thing and the topic of reflashing disappeared like smoke, and you decided to repeat it again.

1) YOU gave a link to your post

2) The following message gave you similar advice to my:

bk-78 @ 04/05/19, 14:13

Leave this venture. Shea loader, then the RAW-firmware, everything is in recovery. May I help.

3) On this advice to you in that topic ended

4) You came to the topic "Marriage and repair" with your question, and you are indignant at the advice of sending references to a completely different topic "Discussion"

Logics? No, not heard ...

[lovesos]

GeniusBo @ 04/07/19, 03:01

Who ordered the display module on ZE551ML? Throw off the verified link.

If it is still relevant, then I bought on Ali according to the following scheme (although, on the 550th model):
1) Drive into the search "ZE551ML display"
2) Sort by order quantity
3) Choose an option from the top of the list of reviews + price

In the end, the choice fell on the manufacturer AllParts (not to be confused with the seller). I took it with a frame - it's a little more expensive, but I do not need to mess around with plywood, I also updated the crooked frame. The display came quickly, packed securely, got up without problems, for several months now it has been working without complaints.

You can further save:
1) Wait for significant holidays - on Ali regularly during them additional discounts / coupons
2) Buy using cashback service - fly-shops or ePN (the same fly-shop gives up to 7.5% for mobile accessories, and occasionally up to 15% comes)
3) Buy with the right bank card - some banks have up to 5% cashback programs for online purchases (regardless of the cashback service)