[X]Assistant

[cyxou]

iTunes error 48 download

Apple iPhone 4S
Firmware: 8.1

Jailbreak: Yes
Jailbreak method:Pangu

Description of the problem:
The device is locked on Sprint. Worked through Gevey AIO.
It was reset and after that it did not start.
Since 8.2 and below were no longer subscribed, I had to restore to 8.3, but when I try to restore, error 48 always crashes. At the same time, the progress bar on the phone on the apple screen fills up completely and after some time in this state, iTunes crashes with the indicated error.
At the moment when you turn on the phone always shows a red apple and offers to connect to a PC with iTunes.

This is not a hardware problem, the phone did not fall after the moment of erasure, nobody climbed inside.

There have been actions:

1. Made on tips from Google - deleted IPSW, re-downloaded, the result is the same.
2. I tried on three PCs and two original cords and their combinations - the same as error 48.
3. Entered into DFU and tried to flash via iTunes - error 48 with the same symptoms
4. Tried to flash from MacBook - the same
5. I tried to flash 8.4 beta 3 - the same as error 48
6. Withdraw from the recovery mode using Recboot - the phone starts to show the apple when it is loaded and then turns off.

A similar problem with a similar intro with the same device arose from another user.Gamzat721That most likely confirms that the problem is still a software one.

What else can you do? Thanks in advance for the answers!

Post has been editedcyxou - 14.05.15, 08:59

[mr.bred84]

I have the same garbage .... I tried to flash with 7.1.1 (-48)
phone badlock
Is there anyone on the decision ?!

[Tolbas]

Can you find in this article ... -http: //www.solvusoft.c...-itunes-error-code-48/

[cyxou]

Useless, especially with the Macbook tried.

[Gamzat721]

AFTER JAIL, FORGOTTEN THAT YOU CAN'T MAKE A RESET, DID IT AND BODY DEPENDENCE ATTENTLY !!! I've been on a bunch of different computers, including MacBook! maybe someone came across there but it’s dull there, everyone is saying the same thing and it doesn’t help! HELP PLIZ, YOU CAN NOT UNDERSTAND WHAT THE CASE DOES IN SO!

[mr.bred84]

I tried everything too ... and I am flashing other phones without problems with this firmware
share how and what is treated
there was no jail on the phone
just updated

[cyxou]

On which macbook did you try? What year?

[A.R.S]

It is believed that this is theerror 48(some avalanche went to these errors в„–48 to 4S) - analogue is much more well-knownerrors -1.

This can indicate the firmware log. Where they look at it is without a clue, but there it can be written in plain language like Modem failed, error -1.

Post has been editedA.R.S - 15.05.15, 23:29

[Gamzat721]

cyxou,

What exactly can not I say but for sure that the new modern Apple comp. With the updated ITyuns and all the cases, I downloaded the firmware there as well as on Windows it reaches the end and then error 48. I heard that if the hardware error is, then the error goes out in the first seconds.

[A.R.S]

[email protected], 01:06

I heard that if the error is a hardware error then the error goes out for the first seconds.

As far as I personally know, the modem is being flashed closer to the end of the process, about 75-80%.

[Gamzat721]

So I give it in general at almost one hundredth percent, the band has reached the end and reaches it twice more and that's it! ERROR!

[cyxou]

Rummaged and found a log. Here is the last one:

[20: 16: 57.3867] Failure Description:
[20: 16: 57.3867] Depth: 0 Error: AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[20: 16: 57.3867] Depth: 1 Error: The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - Failed to handle the message type StatusMsg)
[20: 16: 57.3867] Depth: 2 Error: The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[20: 16: 57.3867] Depth: 3 Error: The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[20: 16: 57.3867] Depth: 4 Error: The operation couldn’t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[20: 16: 57.3867] Depth: 5 Error: The operation couldn’t be completed. (BBUpdatererror 48 - Modemreturned to download mode)

[Gamzat721]

cyxou,
It turns out the modem died after a reset?
Can the hardware burn out in this way?
And how much will it cost to replace it ???

[cyxou]

I can not believe in the death of the modem for software reasons.


Here is another interesting part of the log

[00: 31: 44.6459] bbupdater: BEGIN: Preparing Initial stage
[00: 31: 44.6459] bbupdater: Requested boot mode: kBBUBootModeNone
[00: 31: 44.6459] bbupdater: Creating transport, attempts remaining 3 ... bbupdater: OK
[00: 31: 44.6459] bbupdater: Modem not booting, crashed?
[00: 31: 44.6459] bbupdater: Modem not booting, attempts 3
[00: 31: 44.6459] bbupdater: Creating transport, attempts remaining 3 ... bbupdater: OK
[00: 31: 44.6459] bbupdater: Modem not booting, crashed?
[00: 31: 44.6459] bbupdater: Modem not booting, attempts 2
[00: 31: 44.6459] bbupdater: Creating transport, attempts remaining 3 ... bbupdater: OK
[00: 31: 44.6459] bbupdater: Modem not booting, crashed?
[00: 31: 44.6459] bbupdater: Modem not booting, attempts 1
[00: 31: 44.6459] bbupdater: Creating transport, attempts remaining 3 ... bbupdater: OK
[00: 31: 44.6459] bbupdater: Modem not booting, crashed?
[00: 31: 44.6459] bbupdater: Modem not booting, attempts 0
[00: 31: 44.6459] bbupdater: Attempting to erase and restarting the update process
[00: 31: 44.6459] bbupdater: Forcing into the first stage
[00: 31: 44.6459] bbupdater: powercycling modem
[00: 31: 44.6459] bbupdater: END (kBBUReturnTryAgain): Preparing Initial stage

The modem does not boot

Post has been editedcyxou - 17.05.15, 00:45

[Gamzat721]

cyxou,
I also can not believe, I read a lot of forums, who advises to put in the fridge DDD Who else is stitching something with jumpers)) In short, there is no clear answer
Really no one can help us in this situation.

[driverxxx92]

Is the latest version of iTunes?
There is nothing on the Internet on the topic "error 48 or -48". I read that for some 48 the error crashes when synchronizing music, hence the iron error is unlikely IMHO.
It is advised to completely remove the tuna with all its tails, delete all backups and clean the registry, download the latest tuna and firmware. Infa from internet, nothing personal

[Gamzat721]

driverxxx92,

If you knew how many times this was done))) And on the OS installed and on different computers, the Internet is different !!!

[cyxou]

Similarly, everything is already done.
Soldering a modem is too hardcore.

[Gamzat721]

cyxou,
And what they write about a jumper or something in the fridge is actually real?

[cyxou]

About the jumper also read in passing. The refrigerator did not help me :)

[Gamzat721]

cyxou,

What does the freezer do?
The type of ice conducts electricity, and compounds having sunk, conduct it.