*
IN 1: How to update the application? Finds update in the Mihome application settings, but when you click on the updating process, it does not go at all (it does not matter WiFi or mobile Internet)
ABOUT: This can happen if if there is a version of GP. Remove the version of GP, download and update to Gudulu hands, and after the swing, or put the application to date immediately.
Or update directly from the GP.
*
A - Pro Gateways and Zigbee, Alice and hedgehog with them .
List Mihome devices in Alice (Support for regional China and Russia)
*
AT 2: Prompt as to connect to the scenario Mi Home devices from other platforms, such sonoff eWeLink, connected in Mi Home Platform as the other device. As a result, I can not tie them to the rooms well, and to the scenarios too.
ABOUT: Rubbish - Reminder read a tied account. Xiao AI - the voice assistant
This crutch used to connect to YaAlise
*
IN 3: Connect according to the instructions and must choose mainland China, but it is not. What to do?
ABOUT: Select China, if the program is worth the Russian language or Chinnese mainland, if English
*
AT 4: My devices work in China, I bought something else - it is not in China, but in another region there is, what to do? Similar actions, if on the contrary, i.e. Everything is in the region Russia, Germany, Mozambique, etc., but bought for China - what to do?
ABOUT: Save your device, see its fork (if it is)/device number and go read the topic on this device. Put a mod of applications from a hat - Mihome from Eda Sudio, Mihome from Vevs. It can change the plugin to a modified one. Flash if there is an opportunity. If dancing with a tambourine was unsuccessful - make a clone of the application. This also applies to the purchase of gateways with Eurovilka. T.K. Not all devices for China work in other regions, but there are exceptions (the dust of the first version for China, some cameras, i.e. those devices that are in parallel)
*
AT 5: I want to buy Gateway, a steeper Mijia or Aqara?
ABOUT: Aqara imprisoned under ios homekit, works with Mihome, and Aqara Home on android / ios, no radio and developer mode. Gateway Mijia DGNWG02LM works with Mihome, a radio and a developer mode.
*
AT 6: Will I be able to connect the sensors to the gateway Mijia Aqara?
ABOUT: Yes. As well as sensors and zigbee Aqara device to the gateway Mijia
*
AT 7: I want to buy/bought a European gateway, AQARA, Xiaomi Smart Home Gateway 3 Zndmwg03LM - is it possible to connect Chinese sensors to it?
ABOUT: Search according to DGNWG05LM/Euroshulus/Mi Smart Sensor SET/ZHTZ02LM/YTC4032GL ZNDMWG03LM, gateway 3, connection. You can connect through a triple press to the gateway button (transfer of a gateway into a mating mode with Zigbee sensors), but they may not earn.
*
AT 8: How many sub-devices supported gateway.
ABOUT: Mija gateway supports a manual of 32
*
AT 9: Come strange advertisements, how to remove them?
ABOUT: On android - Go to the application profile settings, notification options-store messages to remove daw (Profile-Settings-Message settings-Store messages or profile-Message-cog (upper right corner) -Messages store on ios Go to the application profile messages. -Settings (cog from the top) -Keep remove posts daw. On ios transferred Store messages store messages
*
AT 10: What is RN-plugin? Where and how to determine
ABOUT: RN-plugin . Define rn-plugin or not, you can at boot time, if a card key. If this is rn-plug, at the beginning, before the opening of the plug-in, will be a picture with Divays and below three points, simple plug-opened immediately. Folder plugin / install / rn
Plugins rn russifitsirovat*
AT 11: About pylik - Why are not active 3 points? Not based card, etc.
ABOUT: See the answer to B4 and put the desired region.
*
AT 12: Bring your phone closer to the router. login to the network has expired. Not looking, not finding device
ABOUT: Give all permissions (up to enable bluetooth and location), try a few different applications of the original, if not in auto search, try manually via a plus. Check the correctness of the region. Check the provider on the lock and your router settings.
Make the phone access point to exclude ISP. Just wait and try again.
If the device "shows" that is connected, and the list it does not, then we must also wait.
*
B13: I want to make some script.
ABOUT: Subject scenarios *
Mihome android app*
Mihome ios app *
General Discussion Thread *
Buying and discussion of just device*
Buying and discussion of "smart devices"*
Club of anonymous Mihome`ovtsev - questions about everything, discussion crutches, etc. *
Xiaomi smart home on alternative systems* Dry contacts
outlet zigbee ZNCZ02LMand
Relay Aqara LLKZMK11LMand
modification*
MijiaTemp sided program to view data from sensors blyupuptemperature, color monitors, time synchronization on e-ink.
* Russian radio station
without changing the router's settings, etc. tantsov*Interesting, homemade
1.
Light sensor2.
Connecting to the opening sensor of windows/doors (new Mid Blutuz MCCGQ02HL) external rugs*
B14: The problem with Xiaomi Mijia BT4.0 Bluetooth Multifunctional Digital Clock LYWSD02MMC. This tiny bluetooth watch with temperature and humidity. I set up a time to play with the time zone on your smartphone. But night time escape to 6 hours 21 minutes.
ABOUT: The third battery CR1220 *
B15: The notifications of adverse conditions at a moisture content of less **% on Xiaomi Mijia Hygrometer Bluwsdcgq/01zm - what to do?
ABOUT: Put some old version MiHome - 5.0,5.1,5.2,5.3, etc., the main thing that was a normal plug, not rm. And remove the slider plugin with Notification / Alert
*
B16: How to get to developer mode on the Chinese gateway DGNWG02LM radio.
ABOUT: Plugin - Three points - About - poke a lot of time on the plugin Version (bottom center). If you can not, and closed ports, the opening
ports And How
to plug Through putty. port speed to 115200. On evroshlyuzah DGNWG05LM Developer mode is not
*
B17: It does fit into the adapter / Auktion adapter (auktion) companion conditioner for 16A?
ABOUT: Yes, it fits in a bit modified - the jumper is removed and the PE protective curtains.
Pictures *
B18: Korrekritrovka / exhibiting the correct time zone Zndmwg03lm gateway to work properly scripts and timers.
ABOUT: Link The very useful
In the group, messages about the problems in the scenarios on scripting were slipped in the group: cloud automation operates as it should, but local - with a displacement of the clock belt. It turns out that in this version of the gateway, for the first time, it was possible to use the local scenarios with the schedule for the first time, because earlier the launch of automation by the timer has always been performed exclusively through the cloud. I will not go into technical details, I will only say that the solution to the problem is similar to that for the Xiao AI watch, and consists in the substitution of the clock at the time of conjugation. So, in order for your local automation to be triggered in the correct time on the new version of the gate, you need:
- before pairing gateway installed on the phone time zone GMT + 8 (Beijing, Hong Kong or similar);
- after pairing sure to restart the gateway, and time zone on the phone to bring back
Procedure:
1. Remove the gateway of MiHome (if the gateway was tied. If not, then perform actions on p.2)
2. Change the time zone on the phone in the GMT + 8 (Beijing)
3. Snap the gateway to MiHome
4. After binding to reboot the gateway Nutrition
5. Return back to the time zone on the phone
*
B19: The switches without zero cease to work, the lamps blink, smart lamps/lamps fall off (as long ago it has already been clarified - smart switches without zero are poorly interacting with smart lamps/lamps)
ABOUT: Perhaps there is not enough "load"/nutrition. You can check by adding an incandescent lamp to the network. Solutions - put a capacitor in at least 2 MKF, a 300 ohm resistor or finished assemblies of the gran 300 noolite type, adapter for lighting LIVOLO, etc. Also, if smart lamps, then it is better to take a switch with a zero or flex switch, or a translation of a wireless mode. And the search and reading of the top/reviews steers
IN: Custom firmware
Xiaomi Mijia (LyWSD03MMC) & Xiaomi Miaomiaoce (MHO-C401) Bluetooth Thermometer Firmware *
IN 20: I want to take Xiaomi Gateway 3, but only which version to take China and Global, which is better?
ABOUT: Any - the third gateway is not yet binded. The difference is only in the presence of a BP with a whale in the Chinese version, in the global PSU there are no. There are 3 work in different regions, so (for now) you can take any version and connect to which one you want, where it is. The gateway 3 for Mihome is currently the most universal, because Supports ZGB 3.0 and below, and also picks up BT sensors. You have a built -in squeak, unlike a small speaker in the second version and AQARA locks.
*
AT 21: The notifications from Mihome on MIBAND via Mifit ceased to come, how to fix it?
ABOUT: Notifications from Mihome on MIBAND (Mibend) ceased to come to MMIFIT 5.5.0 and 5.5.1. The option is to roll back to version 5.4.1, everything immediately arrives in the standard mode. В© ser_l or wait, may correct the update.
*
B22: "Problem" - you need to change the router, how in this case to transfer to a new device of a smart home? How to be?
ABOUT: SSID and PASS (Name and Password) leave as they were. If the complete change of SSID and PASS (name and password of the network), then re -add WiFi devices.
*
B23: Currently, there is no information about the environment (the glitch is quite rare, but is present in some). It began with the Mihome version 7.8.603.
ABOUT: You need to change the wallpaper to the chosen/room. The information is returned, but it happens that this happens on 2-3 program launching or until the next data updates.
*
B24: How to translate and replace Rn plugins?
ABOUT: To Russify the plugin, you must translate the mail.bundle, and then replace the original file Main.Bundle
- The path on the original version of Mihome (we need root)
Android/Data/Com.xiaomi.smarthome/Files/Plugin/Rn/1 ****/1 ****/Android/Main.Bundle
- Way to modifying from VEVS (Ruth is not needed)
internal_storage/Android/Com.xiaomi.smarthome/Files/Plugin/1 ****/1 ****/Android/Main.Bundle