Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Prestigio MultiPhone 5453 DUO - Firmware |
Message#2 18.04.15, 17:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | MIUIv5 4.8.29 Download fromGoogle drive Do not forget to make backups, especially backup NVRAM. Description Port MIUIv5 4.8.29 with Laude Pulse S800. Although at the moment it uses 3 or 4 different donors. Features 1. Almost 100% Russified. 2. Removed Chinese applications. 3. Sewn root (no installation of SuperSU and other similar applications is required). 4. Some standard applications are replaced by more functional ones. Installation Install via TWRP (I did not test installation through other recovery.) 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache. system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Acknowledgments User viktorovich0612 for helping me fix the camera. User kotyg for advice, testing and review. User Egor5551 for testing. Post has been editedStalker-medik - 18.04.15, 17:48 -------------------- MIUI v10 Global Stable |
Message#3 18.04.15, 18:03 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | Lenovo S650 Download fromGoogle drive Do not forget to make backups, especially backup NVRAM. Description Stock firmware with Lenovo s650, android 4.4.2. Ported to Prestigio PSP5503DUO (5517). Installation Install via TWRP (I did not test installation through other recovery.) 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache. system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Acknowledgments User slavakrsk for providing porting firmware. M Check outAnnouncement: Rules section "Android - Firmware" 3.9. It is forbidden to publish links to the material (firmware, files, instructions, etc.) located on third-party resources that require registration and paid file sharing services (which are accessed exclusively for a fee), including those that require the installation of any utilities / managers for downloading. It is also prohibited to upload archives with a password if there is no password explicitly in the topic header, or in a message with the file. All content is provided freely, as an act of goodwill, on an “as is” basis. Post has been edited-baw- - 19.04.15, 12:05 -------------------- MIUI v10 Global Stable |
Message#4 19.04.15, 21:07 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | Android L UI V3 Download fromGoogle drive Do not forget to make backups, especially backup NVRAM. Description Android L UI port with Prestigio PSP5517 (5503). This firmware version is based on 4.4.2. This is not an L, but a mod for it. Though very similar. I reloaded the firmware, with a clean installation, you do not need to install a patch for memory. Features 1. Removed Aroma installer because of uselessness. 2. Sewn SuperSU by default. 3. Partially fixed power consumption. 4. Added patch for mounting memory. Patches Install all patches on top of the firmware without wipes. Patchcorrecting the lack of internal memory. Installation Install via TWRP (I did not test installation through other recovery.) 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache. system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Acknowledgments User slavakrsk for providing porting firmware. All for testing and feedback. Post has been editedStalker-medik - 30.09.15, 23:04 Reason for editing: Added a memory patch and reloaded the firmware -------------------- MIUI v10 Global Stable |
Message#5 24.04.15, 20:24 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | MIUI v6 5.X.X updateable Do not forget to make backups, especially backup NVRAM. Currently version 5.8.6 is final. More updates will not be. We look forward to MIUI v7. IMPORTANT Applications that were transferred to the system need to be backed up in Titanium and then restored. Already several firmware were recalled by the Chinese, I personally did not find errors in version 5.7.31, but still it is worth backing up. Description Port version of MIUI from the MIUIPro team for Lenovo S860. Errors 1. Does not see contacts on Sim 1. Changes Version 5.8.6 1. Replaced ViperFX with Dolby Atmos - the sound is cleaner, louder in the headphones (if you don’t like it, you can delete it). 2. Corrected the topic (put 240 DPI. Thanks to the kit and staklinkol). 3. The Chinese finished some minor bugs. Version 5.7.31 1. Added application Multi Mount - to work in USB-drive mode (thanks to the kit). 2. Applied tweaks build.prop for the network (thanks to the kit). 3. Fixed error writing to a USB flash drive (thanks to staklinkol). Version 5.7.23 1. Fixed a problem with USSD. 2. Replaced WSM modules for working with themes (fixed bug when applying themes). These 2 modules are in Chinese in the WSM modules. 3. The rest of the changes are off-line. Version 5.7.2 1. Temporarily does not work usb-drive (the Chinese have sifted through the kernel, I deal with this problem). 2. Added patched theme manager, graphics subsystem. You can download and install third-party themes (you need to include themeautorisation, paid and mithemes in wsm). 3. Fixed the proximity sensor. 4. Lower power consumption. 5. The remaining changes can be viewed on the official website of the miui. Version 5.5.15 1. Works sound adjustment and built-in equalizer. 2. Built-in ViperFX, which works with both the standard player and other applications. 3. The themes without a bootlap are installed and applied, though they are free for now, because (they have already written in this thread) the Mithemes module does not work correctly on V6, and it also requires a patched theme manager and frameworks that, so far, do not seem to exist. 4. Geotags work on photos. 5. Added TitaniumBackup. 6. Added WSM Obbonsd module, which is required for applications with obb stored on a flash drive. 7. Multilingual, including Ukrainian. 8. I did not add SuperSU, as the native Root access now works without errors. To enable it, you need to start an application that requires root, then go to Security->Permissions->Root access and checkbox enable access. 9. As well as changes from the Chinese, which can be viewed on the official website. Version 5.4.17 1. Fixed sound improvement for headphones. 2. Fixed screen refresh rate (no flicker). 3. Fixed animation in the curtain (no strip in the center of the curtain). 4. Fixed the dialer (now native with v6, and not with v5 as it was before). 5. Improved camera performance (on the advice of staklinkol used libraries with android L). 6. Improved autofocus camera. 7. Removed unnecessary applications and libraries (nfc, compass, gyroscope, miuimarket). 8. Added apps from google (speech synthesizer, google settings). 9. Fixed problem with time zones for Russia 10. Added WSM tools + MiThemes (a module for improving miui and downloading paid themes). 11. Hacked market (not me, found in the thread on the forum). Version 5.3.7 1. Integrated updates to version 5.3.7. 2. Fixed animation bug with dialer. 3. Fixed the bug "No network". 4. Fixed animation of battery charge when the phone is off. 5. Fixed a bug with no background when receiving USSD. 6. Added boot MIUI. 7. Built SuperSU, but you need to upgrade, you canfrom here. Download Installation There are 2 installation options: clean and update. Install via TWRP (I did not test installation through other recovery.) Clean installation: 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache, system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Upgrade from an earlier version: 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Wipes do not need. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. After the reboot, the system will automatically update. 7. Since the radio module is updated, after booting the system, you need to restart the phone. Important Update to version 5.7.2 needs a little different 1. Making a backup. 2. We do all the necessary wipes. 3. Install the firmware. 4. Restore the data section from the backup (this is necessary because of the patched system files to avoid errors). Patches Acknowledgments All for the provided material for porting and updating, as well as for the help in testing. Thank you for providing the manuals on this forum. Special thanks to BurgerZ and the team at miui.su. Thanks to the MIUIPro team for supporting the MTK6582 processor. Posted on 04.24.2015, 20:24: This latest version, if there are bugs - I will finish it. The remaining versions will be gradually removed (sorry Google Drive is not rubber). I think after the release of v7, leave only the latest version of v6. Thanks for the help and waiting. Post has been editedStalker-medik - 21.09.15, 15:41 Reason for editing: Removed old versions, left last -------------------- MIUI v10 Global Stable |
Message#6 24.04.15, 22:18 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | Checked, you can delete the compass, because We do not have this sensor in our phone and it does not work through GPS. It is located in /system/app/MiuiCompass.apk. In the next update I will drink. You can also delete /system/app/MiuiSuperMarket.apk and /system/app/Nfc.apk. Post has been editedStalker-medik - 24.04.15, 22:37 Reason for editing: added -------------------- MIUI v10 Global Stable |
Message#7 27.04.15, 17:07 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | burannt To make it clear what he wrote about Egor5551 -here is a link. Another very convenient tool for working with MIUI and Lewa OS -jBART. Below is the porting manual, I don’t remember where I found it, so thanks to the author for the manual. Porting manual My method of porting from identical processors tested on mt6582 and mt6592 Android 4.4.x use all files from your device we change to our bin \ 6620_launcher ccci_fsd ccci_mdinit geomagneticd gsm0710muxd gsm0710muxdmd2 msensord mtk_agpsd sdcard sensorservice vold etc \ firmware \ modem_1_wg_n.img etc \ permissions \ change all .xml files that start with android.hardware. etc \ wifi \ p2p_supplicant_overlay.conf wpa_supplicant.conf wpa_supplicant_overlay.conf etc \ agps_profiles_conf.xml apns-conf.xml audio_effects.conf audio_policy.conf custom.conf lib \ hw \ all your stock lib \ soundfx \ all your stock lib \ ssl \ all your stock lib \ libaudio.primary.default.so libcam.paramsmgr.so libem_sensor_jni.so libfacelock_jni.so libgsensor_jni.so libsensorservice.so libspeexresampler.so libspeexwrapper.so If the prose does not start and hangs on the logo, then we also change it to your libMali.so Now repair BT and Wifi bin \ mtkbt wlan_loader wmt_loader wpa_cli wpa_supplicant etc \ bluetooth \ all stock etc \ firmware \ WIFI_RAM_CODE WIFI_RAM_CODE_E6 WIFI_RAM_CODE_MT6582 WIFI_RAM_CODE_MT6628 WMT_SOC.cfg etc \ wifi \ all stock lib \ libbluetooth_jni.so libbluetooth_mtk.so libbluetooth_relayer.so libbluetoothdrv.so libbluetoothem_mtk.so libbrctrler.so libbtcust.so libbtcusttable.so libbtem.so libbt-hci.so libbtpcm.so libbtsession.so libbtsniff.so libbt-utils.so libem_bt_jni.so libem_gpio_jni.so libem_modem_jni.so libem_sensor_jni.so mtk_stp_bt_soc.ko libem_wifi_jni.so libpalwlan_mtk.so libwifitest.so libwpa_client.so if the camera is green and the background image on the desktop is not displayed change lib \ libdpframework.so If you need the work of the touch buttons as in stock, then we change to our usr \ keychars \ on stock keylayout \ on stock lib \ libinput.so libinputservice.so kernel boot.img in the core we change to our kernel kernel_header in rmdisk change or add your camera from the drain and we result in stock files in rmdisk fstab fstab.fat.nand fstab.nand init.project.rc init.no_ssd.rc this file may be called in the ported kernel init.ssd.rc init.usb.rc in init.rc are looking for #Camera and bring it to the state as in stock now edit META-INF \ com \ google \ android \ updater-script since we are already porting META-INF to us in the updater-script, we need to compare the mounting of blocks with our own in these blocks format ("ext4", "EMMC", "/ dev / block / mmcblk0p5", "0", "/ system"); format ("ext4", "EMMC", "/ dev / block / mmcblk0p6", "0", "/ cache"); format ("ext4", "EMMC", "/ dev / block / mmcblk0p7", "0", "/ data"); mount ("ext4", "EMMC", "/ dev / block / mmcblk0p5", "/ system"); mount ("ext4", "EMMC", "/ dev / block / mmcblk0p7", "/ data"); The numbers in red should coincide with the numbers of your native blocks, you can see them through the droid tols or peep in the firmware that is already under your device. Lines can change, some kind of cache or data may not be, but the system always is. The instruction does not give a 100% chance of success, it is not always necessary to change everything, so dofull backupand good luck. Posted on 04/27/2015 5:07 PM: kotig, I acted differently — I stuffed the living wallpaper into the system (it will probably work like the user one) and the problem disappeared. Also a good option, I was helped by the option of installing through Themes mod loxcreen. By viperfx - it would be nice if you taught the stock player to open it as an equalizer and cut it out for a while. I agree, but it will be more complicated than just porting. You can try to do so. -------------------- MIUI v10 Global Stable |
Message#8 03.06.15, 08:15 | |
status was not found [offline] Group: Friendssavagemessiahzine.com Messages 1516 Check in: 05.06.13 Microsoft Lumia 535 DS Reputation: 138 | Stalker-medik, Cyan et of course: tablet_za:: russian:. Regarding iksperii - there were several of their devices, and to be honest, I tried to immediately cast. Do not like their firmware. It seems to be both productive and almost non-buggy, but here is something wrong: D Although if there is a full-fledged sound engine from Sony, then music fans will like it. And if the centime is also maintained, the garbage is removed and there are 'small applications', then you get a good rum :) And about the question of meow, do geographers work in the cell? Well, sometimes I need this not very useful feature: D M Check outForum Rules! 4.16. The answer is forbidden without the text (smile, including text smiles). As well as answers consisting only of smiles, or overloaded by them (more than three smiles in one message) in all sections, except for the section "Trepalka". Post has been edited-baw- - 03.06.15, 08:36 -------------------- u4u |
Message#9 20.06.15, 06:08 | |
Granddad [offline] Group: Friendssavagemessiahzine.com Messages 3117 Check in: 30.06.13 Reputation: 777 | Guys help out a gentle backup NVRAM. -------------------- Respect yourself and others! |
Message#10 20.06.15, 08:11 | |
status was not found [offline] Group: Friendssavagemessiahzine.com Messages 1516 Check in: 05.06.13 Microsoft Lumia 535 DS Reputation: 138 | |
Message#11 27.06.15, 14:09 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | Sony Xperia E4 Download fromGoogle drive Do not forget to make backups, especially backup NVRAM. Description Sony Xperia E4 port. The original firmware was taken from Sony with the latest version. The full version with all the programs from Sony, so if you do not need something - delete through Titanium Backup. Features 1. No SuperSU, you need to install separately. 2. Did not delete anything, so the firmware turned out to be voluminous. 3. The player and sound engine are from Sony. 4. Firmware deodexed. 5. Fixed errors of the previous version. Errors 1. Panoramic shooting mode does not work. Patches Patches are installed on top of the firmware. Wipes do not need. Patchcorrecting not working front camera. Installation Install via TWRP (I did not test installation through other recovery.) 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache. system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Screenshots I forgot to make screenshots myself, but you can seehere. Acknowledgments All for testing and feedback. Post has been editedStalker-medik - 11.09.15, 20:57 Reason for editing: Added camera patch. -------------------- MIUI v10 Global Stable |
Message#12 28.06.15, 22:33 | |
Novice [offline] Group: Active users Messages 33 Check in: 15.08.12 Prestigio MultiPhone 5453 DUO Reputation: 0 | start to write a topic with 30p. There just update and a lot of bricks. And this problem, like its solution somewhere there was. I read it ... but since I understood .. There is no backup for standard (standard) recovery ..?! ((((((Only for CWM? What to do? (( M Check outForum Rules! 4.15. The names of topics and posts overloaded with punctuation marks (more than three in a row) are prohibited, for example: "How to set up Wi-Fi ????????". An exception is the section "Breaker". Post has been edited-baw- - 28.06.15, 22:52 -------------------- І ON AN ONLINE GROUND, THE ENEMY WILL NOT BE ABOUT, SUPOSTAT, BUTE SIN AND BUDE MATI, AND BE PEOPLE ON THE EARTH ... |
Message#13 30.06.15, 10:17 | |
Granddad [offline] Group: Friendssavagemessiahzine.com Messages 3117 Check in: 30.06.13 Reputation: 777 | Xperia E4 ROM Information The original firmware Xperia E4 Rom Android 4.4.4.LinkEverything is working. Great camera. Sound - Well ... hear for yourself! Changes Replacing butanimation. Eliminated a lot of unnecessary. Disabled as unnecessary Update Center. Tweaks to improve 3G signal reception. Changed the size of the TCP buffer-speaking easier, slightly improving the Internet connection. It will be useful for those who have slow Internet. Installation BEFORE INSTALLATION WE MAKE BACKUP !!! Installation is possible with CWM, but better with TWRP1. Skip the firmware to the microSD card and go to the requer 2. Making backup of all sections! (This is done in the Backup section, select all partitions and navigate from the bottom along the arrow from left to right, waiting for the process to finish.) 3. Go to the Wipe section, select the data, system, cache, dalvic cache sections, navigate down the arrow from left to right, wait for the process to finish. 4. Go to the Install section, select the external microSD katu (if it is not already selected), select the archive with the firmware and flash it. 5. After the end of the firmware, click Reboot. GO!!! Acknowledgments For help, support, for participation in the tests.staklinkol, stalker-medik, kotig. Post has been editedklich007 - 01.07.15, 16:12 Reason for editing: SHAPE -------------------- Respect yourself and others! |
Message#14 01.07.15, 22:30 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | kotig, [email protected], 20:01 Can I fix this (change the density of the screen)? Or the count will become clumsy? For changing the density of the screen, build.prop is responsible, or rather the linero.sf.lcd_density = X. For our device, if you believe the antitu X = 240. This value I left in Sony. I selected an optimal value of X = 220 for meow using a scientific method. Therefore, visually it seems all big. You can try to change the value in Sony this value, like on our devices should not look clumsy. If someone decides to change - let him unsubscribe, I will not edit it myself, I am busy with cyan) But if all the rules, you can add a patch. -------------------- MIUI v10 Global Stable |
Message#15 11.07.15, 09:16 | |
Old man [offline] Group: Friendssavagemessiahzine.com Messages 913 Check in: 22.06.14 Oneplus 5T 6/64 Reputation: 120 | people need help) I can not connect the phone to my computer. pops up like this: here yesterday everything was ok as soon as he did not conjure, nothing helped. |
Message#16 11.07.15, 11:48 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | [email protected], 09:16 I can not connect the phone to my computer. And in the device manager, what does it show? Such an error in several cases happens: 1. The driver flew to the usb hub. 2. Problem with ports (poor contact, short). 3. The problem with the cable. -------------------- MIUI v10 Global Stable |
Message#17 11.07.15, 22:56 | |
status was not found [offline] Group: Friendssavagemessiahzine.com Messages 1516 Check in: 05.06.13 Microsoft Lumia 535 DS Reputation: 138 | [email protected], 12:16 people need help) I can not connect the phone to my computer. pops up like this: here [attachment = "6520545: Snapshot.JPG"] yesterday everything was ok as soon as he did not conjure, nothing helped. Right click on an unknown device and open properties In the properties window, go to the “Details” tab and select the item “Equipment ID” in the field “Property”. In the equipment ID of an unknown device, the most important thing that interests us is the VEN parameters (manufacturer, Vendor) and DEV (device, Device). In general, if you do not see these two points, then the port / cord / port of the device is to blame. If you see, the firewood is damp. Then you gosyudyand in search you drive in the received values VEN / DEV Well, or with a new discussion on the headline, install firewood. In general, even if it does not help to recognize the device, then at least you will find the reason. -------------------- u4u |
Message#18 20.07.15, 10:46 | |
Old man [offline] Group: Friendssavagemessiahzine.com Messages 913 Check in: 22.06.14 Oneplus 5T 6/64 Reputation: 120 | Actual for Sony firmware, namelyport from sergey.kochetkoff, Who has a problem with recording to external memory (microSD), but did not find a solution. If there is no root right, nothing will work Decision: RootExplorer Go to /system/etc/permissions/platform.xml Open the text editor Editing blocksWRITE_EXTERNAL_STORAGE, android.permission.ACCESS_ALL_EXTERNAL_STORAGE and android.permission.WRITE_MEDIA_STORAGE It should look like this: <permission name = "android.permission.WRITE_EXTERNAL_STORAGE"> <group gid = "sdcard_r" /> <group gid = "sdcard_rw" /> <group gid = "media_rw" /> </ permission> <permission name = "android.permission.ACCESS_ALL_EXTERNAL_STORAGE"> <group gid = "sdcard_r" /> <group gid = "sdcard_rw" /> <group gid = "sdcard_all" /> <group gid = "media_rw" /> </ permission> <permission name = "android.permission.WRITE_MEDIA_STORAGE"> <group gid = "sdcard_rw" /> <group gid = "media_rw" /> </ permission> After adding, save the changes, delete the bak file that the editor creates. Restart our smart. Everything :) (c) - Taken from the Xda-Dev forum. I did not download a torrent on a flash drive, and could not remove movies from a video player) and I found it) Post has been editedstaklinkol - 20.07.15, 10:56 |
Message#19 21.07.15, 20:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | ColorOS 2.0.1i Download fromGoogle drive Do not forget to make backups, especially backup NVRAM. Description Port Huawei Honor 3c. An updated version of the firmware on the art. Features 1. There is a root. 2. Fixed quacking in music tags. 3. Fixed a problem in the camera at the entrance to the gallery. 4. Functionally very close to MIUI. 5. Of the shortcomings - the computer identifies the phone as Oppo Prestigio (xx che, everything seems to be rummaged). 6. The access point is working. 7. Fixed applications and animation. Installation Install via TWRP (I did not test installation through other recovery.) 1. Download the archive to the SD-card. 2. Download the phone in the recovery (hold down the volume rocker "+" and the power key.) 3. Make wipe dalvik, data, cache. system. 4. Select Install and specify the path to the firmware. 5. After installation, restart the phone. 6. The first boot is longer than usual, so you should wait about 7-8 minutes. Screenshots Acknowledgments MAD Team BD for providing a donor, aborigen03 for help with finding a donor, all for testing and feedback. As well as the author of the donor firmware Donor 3c. Post has been editedStalker-medik - 26.09.15, 21:54 Reason for editing: Added version on arte. -------------------- MIUI v10 Global Stable |
Message#20 23.07.15, 23:04 | |
[offline] Group: Honorary Gameday Messages 3800 Check in: 01.12.08 Xiaomi Redmi Note 4 3/32 Reputation: 591 | kotig, Lukir700, M We transfer flooding to koumiss. -------------------- Something with my memory has become. After all, I am wounded and old now. Repeat and remind me more often. I will not remember everything, so I will write down the part. |
Message#21 28.07.15, 17:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 14.05.14 Xiaomi Redmi Note 4 3/32 Reputation: 157 | kotig,On the yusb-drive - apparently it was completely removed from the system, at least in the June releases I did not see it. Similar in its time to v5 done. There, too, if you turn on mtp or ptp, then there is no longer a usb drive. And I also noticed a strange thing — when system optimization is on (system animation off), the RAM is more loaded than with system optimization off. Try in build.prop to uncomment the line persist.sys.miui_feature_config = / system / etc / miui_feature / lite.conf (you need to remove the front grill). This file is responsible for the optimization. It periodically comes across Xiomi. I also couldn’t write to Podkicker on the flash drive. I saved the data, formatted the flash, put it clean on the phone - everything is ok. Filled data. While working. Posted on 07/28/2015 5:41 PM: hhdhzhnzv I already wrote - if you do not need a GPS, a voice recorder, USSD requests, video recording - I can post a test version 12.1 even tomorrow. Post has been editedStalker-medik - 28.07.15, 17:39 Reason for editing: errors -------------------- MIUI v10 Global Stable |
mobile version | Now: 05/20/19, 01:56 |