Explay Diamond - Unofficial firmware
Explay Diamond - Unofficial firmware (OS 4.2 - 4.3)
Explay Diamond, Intex Aqua Octa i17
Description | Discussion � | Firmware �
Post has been editedMinotavrusus - 07.03.16, 04:37
Explay Diamond, Intex Aqua Octa i17Description | Discussion � | Firmware �
The information below is required to read!
ANY ACTIONS ACCORDING TO THESE INSTRUCTIONS ARE PERFORMED AT YOUR FEAR AND RISK AND UNDER YOUR RESPONSIBILITY!
Before any action with changing the firmware, I STRONGLY recommend making a backup of the stock (factory) firmware.
- I strongly recommend to get acquainted withForum Rulessavagemessiahzine.com
- Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
- To discuss and search for third-party programs / games, use the following sections:ProgramsandGames.
- To compare the device with competitors and on the choice of devices, please contact:Selection and Comparison.
- Before posting photos, read the topicWorking with Images on the forum
- Messages that are not related to the firmware topic (offtopic) are deleted without warning.
Drivers and Utilities
Official firmware
Unofficial firmware
Instructions
miscellanea
For developers
working links to firmware
There is no curator in the subject.
For questions about filling the caps, contact the moderators through the button
For questions about filling the caps, contact the moderators through the button
Post has been editedMinotavrusus - 07.03.16, 04:37
Andrew + @ 04.30.2014, 20:04
can someone write a step-by-step instruction on how to get the root ...
For official firmware, I personally did this:
Any operation is performed at your own risk!
1. Download and install the program on the computerVRoot.
2. Disable antivirus programs (as needed).
3. On the device must be enabled: USB debugging in the Settings section - For developers, installation from unknown sources
4. Run the VRoot program, connect the included device to the computer (if it was not determined, try installing the latest drivers from the official site of your device).
5. After the device is determined by the program, press the lower right green button "ROOT", wait.
 |
6. After the last window of the program appears, the device reboots. It can be disconnected from the computer.
7. All of you got ROOT rights.
8.Download from the SuperSU market and launch it ... the application will announce the installed conflicting application (meaning Chinese SuperSU) and will offer to replace it. Click OK.
 |
 |
 |
 |
 |
 |
DONE ....
I didn’t touch this Chinese icon ... you never know what:
 |
Root Explorer works flawlessly.
Post has been editedMinotavrusus - 14.04.15, 11:57
Another way to get root, CWM and patched backup:
InstallMTK Droid Root & Tools on computer. Installing drivers for ADB.
Turn on USB debugging in the phone.
Connect the phone to the computer and openMTK Droid Root .
After connecting, when the phone is determined and the information about the phone appears, press the buttonROOT .
If you do not receive a temporary root, you first get the root with the help of the Vroot utility (or whatever you like), then again press the button to get a temporary root.
After receiving the temporary root go to the tabroot, backup, recovery and press the button Backpack and wait for the end of the process of saving the firmware backup, the process is not fast and will take some time.
All sorts of warnings and conventions will pop up in the window of this utility and on the phone screen, everywhere click OK
Then press the buttonRecovery and Boot pre-ticking Use boot from phone and wait
At the end, we agree to flash rekoveri and patched boot.
We are overloaded and rejoice at the received CWM, patched boot and received SuperSU.
After all the successful manipulations, we enter the recovery and click on the tabBackup and restore (scrolling with the volume buttons),
in the drop-down menu, selectBackup .
At the end, we will have a backup in our phone’s memory that can be rolled back at any time.
MTK Droid Root & Tools swing HERE , observing warnings about abuse of the antivirus (I stupidly disabled my for the period of all these manipulations)
Post has been editedMinotavrusus - 17.05.14, 04:59
InstallMTK Droid Root & Tools on computer. Installing drivers for ADB.
Turn on USB debugging in the phone.
Connect the phone to the computer and openMTK Droid Root .
After connecting, when the phone is determined and the information about the phone appears, press the buttonROOT .
If you do not receive a temporary root, you first get the root with the help of the Vroot utility (or whatever you like), then again press the button to get a temporary root.
After receiving the temporary root go to the tabroot, backup, recovery and press the button Backpack and wait for the end of the process of saving the firmware backup, the process is not fast and will take some time.
All sorts of warnings and conventions will pop up in the window of this utility and on the phone screen, everywhere click OK
Then press the buttonRecovery and Boot pre-ticking Use boot from phone and wait
At the end, we agree to flash rekoveri and patched boot.
We are overloaded and rejoice at the received CWM, patched boot and received SuperSU.
After all the successful manipulations, we enter the recovery and click on the tabBackup and restore (scrolling with the volume buttons),
in the drop-down menu, selectBackup .
At the end, we will have a backup in our phone’s memory that can be rolled back at any time.
MTK Droid Root & Tools swing HERE , observing warnings about abuse of the antivirus (I stupidly disabled my for the period of all these manipulations)
Post has been editedMinotavrusus - 17.05.14, 04:59
MIUI v.5 by kiriego19
Step 1 I need to sew up my boot, check for start. Made by
Step 2 (launch OS on the device) Made by
Step 3 (starting hardware modules) Made by
Step 4 (optimization for the device + tweaks + features of the type: switching memory, additional menu, etc.)
Photo device.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
I do not disclose the name of the tester, because Perhaps the firmware is not the only one.
Download
Alfa_1 : Tyk
Bugs:
P.S. Do not judge strictly, the firmware is assembled on a smartphone, at work, while there was nothing to do, from the firmware of 3 donors)))
Thanks for the help in testing: pawel1287
For paid mobile traffic: Minotavrusus
markup
 |
Post has been editedkiriego19 - 18.05.14, 22:42
Carliv_CWM
Stitch throughAdb or Flashtool
- tested, works, support for the wheelbarrow is included.
-You don’t have better yet.
Chpok:
recovery.img (5.79 MB) 
LeWa OS
Lewa from 04/09/2014
Graphics, screenshots:
Description:
- Fully working firmware.
The only serious drawback is battery consumption with active use: 20% per hour:
Full screen caller photo in the near future
Installation Instructions
- DownloadingHERE
- Save to the root of the SD card
- In recovery, we backup (do you think so?)
- Three wipes and system format
Lewa OS from 06/23/2014
Screenshots
- I did not notice any changes in the appearance, so I see no reason to screen ALL
 |
- DownloadingHERE
- Initial Installation (CWM Required)1. Throw the downloaded zip archive to the root of the memory card (sdcard)
2. Go to Recovery:
On the phone off, hold down the buttons: Volume up + turn on
3. Choose an itemWipe data / factory reset
4. Wipe cache partition
5. AdvancedFurtherWipe dalvik Cache
6. Mounts and storageFurtherformat / system
7. Now chooseInstall zip from sdcard, FurtherChoose zip from sdcard
8. Choose firmware
9. We are waiting for the firmware to be installed. - Root Explorer is preinstalled and some interesting in appearance CM Browzer
- Wi-Fi, 3G and GPS picks up fast
- Very loud sound in all modes ...
- Built-in memory cleaning is activated by a long (2sec) tap on the touch button "home"
- In order for the subscriber’s photo to be full screen in good quality, you must reinstall the photo ...
- The computer does not see the phone’s memory, and after connecting to the computer via USB, the phone stopped seeing the SD card ... After reboot, the SD card becomes visible.
- The stock calendar is a great squalor from Google ... therefore, I propose a more simpotic version (I once pulled it from some version of Leva)Calendar and how to install itkalendar.zip(2.14 MB)
- We extract three files from archive and usingRoot explorerwe throw them into the foldersystem / appBy pre-deleting the same three pre-installed apk.
- Antutu results
- Battery consumption when using the Internet via Wi-fi ... 10% / hour
- Thanks for the portpawel1287
LewaOS on 07/04/2014
- DownloadingHERE
- See the description in the previous version.
- Installation on the previous version without wipes and format, initial installation with three wipes, respectively, and system format
- The problem with displaying internal memory and SD cards is fixed
- Strange, but it works great on MIUI
- If there is an error in the engineer
- Thanks for the portpawel1287
LEWA 4.8.29
- DownloadHERE
- Three wipe installation and system format
- I did not notice any changes in the appearance, so I see no reason to screen ALL
- Voice call and SMS inSIM card settingsonly from the first SIM card ... accordingly, the subscriber will be called from the shortcut widget from the first SIM card, although both SIM cards are active through the dialer ...
- The subscriber’s photo is available in full screen, you must reinstall the photo
- Error fliesSettings-Applications-System
- Antutu benchmark
- Cool calendar
- Installed familiar on the latest versions of MIUI camera and Snap gallery, some CM Browser, Weather BZ, Root Explorer
- Thanks for the portregion98andpawel1287
LeWa OS 11/14/07
Embellishment: Dark Theme
Screenshots
-Download the archive, pull out the .lwt file
- We throw in the phone along the wayLewa / theme / lwt
-Open the applicationTopics / locallyand chooseDark theme
Download:
DarkEditionTheme_by_K1S.rar(4.42 MB)Post has been editedMinotavrusus - 29.12.14, 06:05
Reason for editing: fixed the link for the last Leva
alexbelt ,
here is the answer toYOUR QUESTIONantitude:
P.S. The installed applications in my device are the same on all four firmware ...
Post has been editedMinotavrusus - 29.05.14, 06:07
here is the answer toYOUR QUESTIONantitude:
Comparison of results in Antutu four firmware
 |
 |
 |
 |
P.S. The installed applications in my device are the same on all four firmware ...
Post has been editedMinotavrusus - 29.05.14, 06:07
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Description:
- Fully working firmware.
- When trying to change the wallpaper from here (Menu / Wallpaper ) Launcher error popped up:
But throughSettings / Screen / Wallpaper and lock screen everything was easily replaced .... - I’ll supplement the battery consumption a little later ...
- The contact list must be copied to the phone and reassigned melodies and photos .... Then, when the call is made, the caller’s photo will be in full screen:
- The base of cities in the weather widget disappointed ... my village was not found .... I had to putWeather bz
- GPS through the engineering menu picked up 6 satellites per minute of a cold start from the room:
- There is no way to display network speed indications in the notification line.
- There is no recovery in the reboot menu.
Installation Instructions
- Downloading HERE
- Save to the root of the SD card
- In recovery, we backup (do you think so?)
- Three wipes and system format
When testing in Antutu, this firmware even loses the drain ...
ColorOS V2
Post has been editedMinotavrusus - 07.10.14, 16:53
Reason for editing: added V2
MIUI
What is MIUI?
MIUI is a globally redesigned firmware for Android-based smartphones. The code of the firmware itself MIUI is closed. This is unique, and most importantly, high-quality firmware, which has been developed by Xiaomi Tech for a long time. This firmware has many features different from what the standard Android OS offers users. In particular, we are talking about a new camera, an improved dialer, player and gallery, as well as other functionality.
You can also say that the new firmware has a modified user interface, which also has no application menu at all. FirmwareMIUI - This is the best solution for those who know a lot about quality and reliability, because this invention includes all the best that was presented to the world of iOS and Android. Initially MIUI It was developed only in Chinese. Xiaomi has included applications such as MITalk, MIGallery, MINotes, MIMusic, and MIBackup to improve the system. All updates are weekly (every Friday) received through OTA, after which they are adapted by other developers into various languages ​​and transmitted to devices.
Can say thatMIUI- this is the best of iOS and Android + their chips and developments. One of the most beautiful firmware on Android.
Evaluate yourself and you will not be indifferent .
You can also say that the new firmware has a modified user interface, which also has no application menu at all. FirmwareMIUI - This is the best solution for those who know a lot about quality and reliability, because this invention includes all the best that was presented to the world of iOS and Android. Initially MIUI It was developed only in Chinese. Xiaomi has included applications such as MITalk, MIGallery, MINotes, MIMusic, and MIBackup to improve the system. All updates are weekly (every Friday) received through OTA, after which they are adapted by other developers into various languages ​​and transmitted to devices.
Can say thatMIUI- this is the best of iOS and Android + their chips and developments. One of the most beautiful firmware on Android.
Evaluate yourself and you will not be indifferent .
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Rules for the formation of the firmware release number
- The version number is generated based on the release date of the release, for example4.5.30 :
- The 1st digit is the last digit of the current year. 2014>>> 4;
- The 2nd digit is the month (1-12). May>>> 5;
- 3rd digit is the day of the month when the firmware is released (will be released)>>> 30.
- The firmware, with rare exceptions (the new year according to the eastern calendar, national holidays in China, etc.), is released / updated every Friday, so each of you can easily calculate what number the next release will wear.
Our ports are based on firmware created by a respectedregion98 for THL100S, special thanks to him
All versions are here.
Please pay attention
Before updating the Mi-Tools module to an available beta version 2.0.7 in firmware version 4.6.27, make a backup ... there is a possibility receive constantly pop-up message "interface error", kosyachny extended reboot menu and the inability to use the phone
version 4.5.30 from 06/03/2014
Description:
- Fully working firmware.
- Correct display of data of callers and called subscribers (number, name, photo) is possible only after editing the phone number in the phone book, namely the prefix +7 .... so as not to suffer manually with the whole list, I suggest usingTHISapplication ....
- For some reason, Carliv CWM is stupid after using it ... namely, it does not want to reboot the device! It only helps to remove the battery
- Courtesy ofpawel1287'om plain CWM works with a bang ...
- This constantly pops up:
And only for the MTS SIM card ... but Megafon somehow went through the "activation of the Xiaomi service" - An error occurred while activating Security / Cleaning / Advanced
- Antutu
- consumption with active use of approximately 10% per hour
- WSM and Mi-ToolsStarting with version 4.1.17, it was decided to abandon a number of patches, as they can be implemented through WSM and thereby provide the user with the right to choose :-). Just as it turned out, most still use WSM. Listed below are patches removed from the firmware and how to enable them in WSM. WSM is embedded and activated in firmware. It remains to enable the specified modules and settings. First line: patch; the second is a similar option in WSM.
The sound is removed when you change the volume
Mi-Tools: Enable option: Sound ->Disable BEEP signal
Added reboot item in rekoveri (on power button)
Mi-Tools: Enable option: System ->"Reboot menu"
Removed the names of the operators from the statusbar
Mi-Tools: Enable option: Status bar ->Telecommunications operator ->"Hide operator name"
To work correctly, first activate nebhodimo root-access (see. FAQ in the same post), WSM and Mi-Tools. To activate WSM first run it, if it is not activated, it is likely that he will go immediately to the desired setting screen, if it does not happen, then click "Settings", then "WSM Control" button. Click "Install" (in the first installation should be allowed to grant rights to the application root). We see that everything set up, you can then restart (or may not reboot). Then we return to the main screen and includes a module Mi-Tools. Either via the WSM, either from the desktop go to Mi-Tools (for the correct application of those do not have to do anything else), and how we need to set up. Now you can restart your phone. Later, after the change Mi-Tools settings for their application it is necessary to reboot. - brief FAQEnable root (root)
Starting with MIUI version 3.12.13: Security application ->"Permissions" ->ROOT Rights
Mobile Download (including Play Store)
Application "Downloads" - menu button - "Options" - "File size limit". Set the desired. - Useful features of MIUI:READ
Installation Instructions
- Downloading HERE
- 1. Throw the downloaded zip archive to the root of the memory card (sdcard)
- 2. Go to Recovery:
On the phone off, hold down the buttons: Volume up + turn on - 3. Choose an itemWipe data / factory reset
- 4. Wipe cache partition
- 5. Advanced Further Wipe dalvik Cache
- 6. Mounts and storage Further format / system
- 7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- 8. Choose firmware
- 9. We are waiting for the firmware to be installed.
Solving the problem with numbers on 911
version 4.6.13 of 06/14/2014
download here
setting
- 1.Over the previous version you can without wipes ...
- 2.After installation, you must reboot again so that all previous Mi-Tools settings take effect again ...
- 3.Initial installation as usual with three wipes and system format
Changes
- 1.Works indicator
- 2. Autoload and Permissions have become separate applications
- 3.Fixed bug with numbers on 911
thank youpawel1287
version 4.6.27
- Download HERE ...
- Installation on previous versions without wipes, but with a reboot and activation of WSW for the entry into force of your settings in Mi Tools ...
- Antutu
- Initial Installation (CWM Required)1. Throw the downloaded zip archive to the root of the memory card (sdcard)
2. Go to Recovery:
On the phone off, hold down the buttons: Volume up + turn on
3. Choose an itemWipe data / factory reset
4. Wipe cache partition
5. Advanced Further Wipe dalvik Cache
6. Mounts and storage Further format / system
7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
8. Choose firmware
9. We are waiting for the firmware to be installed. - List of changes
- thank youpawel1287
version 4.7.3
]
- This port is made with firmware for THL100S, which according to the author region98 is the best ...
- DownloadHERE
- Installation on previous versions without wipes leads to a media error, and with three wipes the format of the systems is still ok ...
- Well, a very sad result in Antutu
- After setting up Mi-Tools, a strange reboot menu popped up, which disappeared after a reboot:
- The error got out in safety-Cleaning-Additionally:
- In everything else, fully working and nimble firmware ... dialer, SMS, camera, Internet, Google Play, root of the law
version 4.7.18
- download
- Installation on top of the previous version without wipes, the initial one with three wipes and a system format
- After installation, you must reinstall WSM Tools so that your previous settings in Mi-Tools take effect
- Added some new tuning chip, then we'll see how it shows itself
- The notification bar is made light
- the volume ring has become thin and pale
- Added Viper
- Small observations of the behavior of the firmware
- Official list of changes
- thank youregion98 for the main work on this version and pawel1287 for adjusting the firmware to a working state
MIUI 4.8.15
MIUI 4.8.29
MIUI 10/17/14
Just another interesting buildMIUI
Logos of operators in the dialer and SMS
- Downloading
- We install through recovery without wipes.
- During the installation, select the logos of their operators.
- In the end, here's what we get:
- In the settings of SIM cards, you need to change the name. Rather, erase it and write two or three spaces
- Thanks to our romodelpawel1287
List of applications that can be safely removed
- AirkanPhoneService.apk - It is necessary for the radio to operate in flight mode
- Backup.apk - Backup data. Deleted, did not notice problems
- BluetoothTest.apk - Designed to test your Bluetooth, which is available through the service code
- Browser.apk - Browser
- BugReport.apk - Report bugs
- ChromeBookmarksSyncAdapter.apk - Synchronization of stock browser bookmarks with Google services (It is recommended to delete if Browser.apk is deleted)
- CloudService.apk - Synchronization with MIUI services
- Divx.apk - Support for playing multimedia files in DivX format
- EdmVpnServices.apk - VPN support
- Email.apk - Post office
- Exchange2.apk - Exchange client. If corporate mail and scheduler are used, then do not delete.
- Facelock.apk - The function of determining your face for the screen lock
- FactoryTest.ap k - Phone test. Eats the battery, you can safely remove.
- FmRadio.apk - Radio
- GooglePartnerSetup.apk - Google social stray
- MediaUploader.apk - Upload images to Picasa
- MiuiCompass.apk - compass
- Notes.apk - Notes
- PRUI.apk - Component of the DRM subsystem PlayReady
- QuickSearchBox.apk - Google search widget
- SamsungIME.apk - Standard Samsung Keyboard
- SamsungTTS.apk - Samsung voice engine
- SecLiveWallpapersPicker.apk - Selection of live wallpapers
- SoundRecorder.apk - Dictaphone
- SuperMarket.apk - Xiaomi Market
- Updater.apk - Firmware update. This arch will come in handy in the future, so think for yourself.
- VideoPlayer.apk - Video player. Deleted, did not notice problems
- VpnDialogs.apk - User interaction component when setting up VPN connections
- WlanTest.apk - Testing wireless access settings
- wssyncmlnps.apk - It is necessary so that your provider can, if necessary, send you or change settings through service messages
- xCoreModule.apk - xTension system management
- xT9Module.apk - Fix T9 (xTension needed)
- xTension.apk - Application from KDev
All these deletions are designed to facilitate firmware and to some extent save battery and traffic, because many applications without our participation and permission climb into the Internet and hang in the background.
HEREmore complete list
Increase the sound in headphones
- We go into the engineering menu, make a gesture to the right until we get intoIron test .
- TapaAudio - Headphones - Type of change to Media
- Level 0 at the highest 14 .
- In the values ​​we prescribeValue 255 and Max. 235 ,
- PushSet on both values, go to the desktop.
- And now we insert the headphones, turn the volume to the full and enjoy the great sound.
The fact is that I often connect the phone to ordinary small computer speakers, listening to music and on MIUI the sound is not very strong in this version .... Maybe someone else will come in handy ...: thank_you:
Post has been editedMinotavrusus - 14.01.15, 08:29
Brothers !! ... I defeated this logo !! : blush:
Instead of a white screen with the inscriptionDiamond there will be such a picture:
You can try ... set through the recovery
update.zip(1.32 MB)
In general, I took advantageTHIS.... tormented kaneshno until I understood everything .... it turns out to be easier than a paired turnip ... The most important thing is that the picture was 720x1280 .... or rather two are the same, but the names will be differentimg1 and img39
__________________________________________________
Oh, and I love to brag! : blush: .... here is a logo muddied itself:
Post has been editedMinotavrusus - 04.06.14, 15:49
Instead of a white screen with the inscriptionDiamond there will be such a picture:
 |
You can try ... set through the recovery
update.zip(1.32 MB)In general, I took advantageTHIS.... tormented kaneshno until I understood everything .... it turns out to be easier than a paired turnip ... The most important thing is that the picture was 720x1280 .... or rather two are the same, but the names will be differentimg1 and img39
__________________________________________________
Oh, and I love to brag! : blush: .... here is a logo muddied itself:
Registered Logo
 |
Post has been editedMinotavrusus - 04.06.14, 15:49
Nexus 5
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Description:
- Fully working firmware.
- Wifi picked up easily
- Google Play installed
- Google Chrome Browser
- Russian language is set in the settings
- The dialer and SMS work, but I forgot about the photo of the subscriber ... I did not take the screen
- Root rights set
- I did not do full testing ... If anyone makes an addition, I will be glad
Installation Instructions
- Downloading HERE
- 1. Download the firmware and drop it to the root of the memory card (sdcard)
- 2. Go toRecovery :
On the phone off, hold down the buttons: Volume up + turn on - Before installation, we definitely doBackup
- 3. Choose an itemWipe data / factory reset
- 4. Wipe cache partition
- 5. Advanced Further Wipe dalvik Cache
- 6. Mounts and storage Further format / system
- 7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- 8. Choose firmware
- 9. We are waiting for the firmware to be installed.
Thankspawel1287
Post has been editedEnlightened grandfather - 25.06.14, 12:58
Reason for editing: In the header
Cyanogenmod 11
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Sample photos (I liked the quality)
 |
 |
Description:
- Fully working firmware for fans of minimalism
- Wifi picked up easily
- Google Play installed
- Xposed installed
- Russian language is set in the settings
- Dialer and SMS work
- Root rights set
- Many widgets
- I did not do full testing ... If anyone makes an addition, I will be glad
- A small warning: after installation the logo will fly off (yours or stock), there will be a clean white screen ....
- To create your Logo (boot screen), you can useThisutility ... I not so long ago wasted onhislogo .....
Installation Instructions
- Downloading HERE
- 1. Download the firmware and drop it to the root of the memory card (sdcard)
- 2. Go toRecovery :
On the phone off, hold down the buttons: Volume up + turn on - Before installation, we definitely doBackup
- 3. Choose an itemWipe data / factory reset
- 4. Wipe cache partition
- 5. Advanced Further Wipe dalvik Cache
- 6. Mounts and storage Further format / system
- 7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- 8. Choose firmware
- 9. We are waiting for the firmware to be installed.
A huge number of topics for CM11
Thanks for the workpawel1287
Post has been editedEnlightened grandfather - 24.06.14, 20:39
Reason for editing: In the header
Nibiru
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Description:
- Fully working firmware ... Pretty interesting design ... Large font
- Wifi picked up easily
- Google Play installed
- Two launchers to choose from (Nova and stock)
- Russian language is set in the settings
- Dialer and SMS work
- Root rights set
- I did not do full testing ... If anyone makes an addition, I will be glad
Installation Instructions
- Downloading HERE
- 1. Download the firmware and drop it to the root of the memory card (sdcard)
- 2. Go toRecovery :
On the phone off, hold down the buttons: Volume up + turn on - Before installation, we definitely doBackup
- 3. Choose an itemWipe data / factory reset
- 4. Wipe cache partition
- 5. Advanced Further Wipe dalvik Cache
- 6. Mounts and storage Further format / system
- 7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- 8. Choose firmware
- 9. We are waiting for the firmware to be installed.
Thankspawel1287
Post has been editedMinotavrusus - 26.06.14, 09:24
Reason for editing: In the header
pure android 4.3
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
Description:
- Fully working firmware ... We can say that the naked android
- Wifi picked up easily
- Google Play installed
- To functionroot You need to download the application from the Market SuperSU and install.
- Root Explorer, MobileUnkle Tools, ES File Explorer, Translator, Navigator and much more are preinstalled.
- Russian language is set in the settings
- Dialer and SMS work
- Boot Logo will change to stock (where Diamond is written on a white background) ... see the header for the change
- I did not do full testing ... If anyone makes an addition, I will be glad
Installation Instructions
- Downloading HERE
- 1. Download the firmware and drop it to the root of the memory card (sdcard)
- 2. Go toRecovery :
On the phone off, hold down the buttons: Volume up + turn on - Before installation, we definitely doBackup
- 3. Choose an itemWipe data / factory reset
- 4. Wipe cache partition
- 5. Advanced Further Wipe dalvik Cache
- 6. Mounts and storage Further format / system
- 7. Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- 8. Choose firmware
- 9. We are waiting for the firmware to be installed.
Thankspawel1287
Post has been editedMinotavrusus - 26.06.14, 09:22
Stock from 03/15/2014 under mod.recovery with support for Xposed.
Features: Completely deodexed, sewed in the root, cut out unnecessary.
Download : download:
Installation from under mod.rekaveri with all the wipes!
Suitable for use by ordinary users, as well as romodels as a base.
Attention! Collected blindly, so check and unsubscribe.
Post has been editedregion98 - 23.07.14, 21:27
Reason for editing: reloaded with corrections
I looked at your hat for mod.recovery and it became very sad.
Therefore, I assembled TWRP 2.7.1.0 for your device based onTWRP 2.7.1.0 by SevenMaxs .
ExplayDiamond_TWRP_2.7.1.0.zip(7.96 MB)
: download:
recovery.img(7.82 MB)
: download:
Post has been editedregion98 - 23.07.14, 21:56
Therefore, I assembled TWRP 2.7.1.0 for your device based onTWRP 2.7.1.0 by SevenMaxs .
Download TWRP under mod. Recovery
ExplayDiamond_TWRP_2.7.1.0.zip(7.96 MB): download:
Installation through mod.recovery without wipes!
Download TWRP for Flash Tool
recovery.img(7.82 MB): download:
Installation via a USB flash drive or Mobileuncle MTK Tools!
Post has been editedregion98 - 23.07.14, 21:56
Reason for editing: Reloaded with corrections
[email protected], 21:30
Everything is possible on Yandex.Disk)
1.TWRPfor installation from under Flash Tools
2.TWRPfor installation from under mod. recovery
______________________________________________________________________________________
both options were not tested ... we will be grateful for testing
Post has been editedMinotavrusus - 22.07.14, 15:47
Baidu Cloud OS
Graphics, screenshots:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Description:
- Fully working firmware, something similar to MIUI, but with its interesting "goodies"
- The computer does not see the internal memory
- The caller’s photo is not full screen
- Root rights are set
- Built-in "taskkiller", like on MIUI
- Antutu benchmark
- Xperia Keyboard
- No built-in clock widget
- We are testing and unsubscribing about our results. The firmware in my opinion is quite interesting and deserves attention.
Installation Instructions
- Downloading HERE
- Save to the root of the SD card
- In recovery, we backup (do you think so?)
- Three wipes and system format
Thanks for portingpawel1287
Post has been editedMinotavrusus - 03.08.14, 19:27
Nik Rom JB SP10
- DownloadHERE
- Three wipe installation and system format
- Cool design of a naked android ... for an amateur
- Root Explorer, Google Play, Xposed are installed and much more ...
- Screenshots
- The firmware is fully working, we test, unsubscribe
- ThanksNikoz47 for the main work and pawel1287 for porting to our device ...
Cristal Black Rom Explay Diamond v.5
- DownloadHERE
- Three wipe installation and system format
- A rather unusual design of a naked android ... Graphics for an amateur (!!)
- Root Explorer, Google Play installed
- Screenshots
- The firmware is fully working, we are testing, unsubscribing ...
- thank yougrisha84 for creating this port
Post has been editedMinotavrusus - 01.09.14, 17:26
[email protected], 14:48
instruction what to do from scratch
1. The most important dance with a tambourine is installing drivers on a computer:
- DownloadHEREFlash Tools drivers and utility
- Installing smartphone drivers on the MTK processor has some nuance. In general, look for ALL files in the downloaded archives..exe and force them to start ... something will be installed, something is not there, do not worry, it’s necessary ...
- Pull the phone off via USB to the computer (not locked, but it’s turned off) ... the sound will sound in the speakers and in the tray you will see the icon for installing new hardware drivers ... the result of this installation is not important.
2. Download custom firmware ... well, for exampleMIUI
3. Download the archiver with CWM (custom recovery) and scatter for flashing this very custom recovery:
CWM + scatter.zip(5.62 MB)4. Run the Flash Tools utility, click on the buttonscatter loading and indicate the path to the downloaded and unzipped scatter file ... then double-click on Recavery in field Location and indicate the path to the downloaded CWM (recovery.img)
5. The utility window should look like this:
 |
6. Click Download and hook up to the computer via USBoff phone and it is desirable to distort the battery.
(It is possible that the installation icon for new equipment will appear in the tray - wait for the result and repeat from step 4)
7. At the bottom of the utility window, a boot bar will run through and a window with a green checkmark will pop up .... click OK
8. Close the utility, disconnect the phone from the computer and turn it on ...
9. This we installed custom recovery CWM
10. Download the downloaded archive with custom firmware to the root of the cd card and follow the instructions:
- Go to Recovery:
On the phone off, hold down the buttons: Volume up + turn on - Choose an itemWipe data / factory reset
- Wipe cache partition
- Advanced Further Wipe dalvik Cache
- Mounts and storage Further format / system
- Now chooseInstall zip from sdcard , Further Choose zip from sdcard
- Choose firmware
- We are waiting for the firmware to be installed
___________________________________________________________________________________________
Everything described easily looks here ... in practice it will be more difficult ... not the first time it will work ... Bear in mind, if you give up, your problems ... But through this whole procedure went through everyone who decided on custom firmware ... This means whatgods do not burn pots ..
Go ahead, good luck ...:savagemessiahzine.com:
Post has been editedMinotavrusus - 15.04.15, 16:37
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement