[X]Assistant

[Danil @ com]

Steamed a lot, a lot and decided to create a theme)))

[Danil @ com]

Instructions for flashing the phone


For the firmware will require:

- Flash tool E2

- Full awareness of your actions and the understanding that if you do something wrong, the phone will lose performance.

- Installed the driver for the phone and the desired firmware in the example using C3530XEKK1

- To install the driver, simply install SamsungPCStudio (Suite) or SamsungKies, depending on the model



Launch Flash tool_E2, using the "..." button, add the firmware files in the following sequence:

C3530XXKI1_bin.fls

C3530XXKI1_cds.fls

C3530XXKI1_UI_IMAGE.fls

C3530OXEKK1_CSC.dffs

You can select all the files at once and use the arrow buttons to set the desired sequence.



In the field behind the arrows you need to select "Erase whole flash before download" and click "Next>"

In the next window, click the "Start USB1" button and connect the switched off phone to the USB port and the phone will start flashing



When the firmware is completed, a green square with a white check mark will appear next to the "Start USB1" button, indicating successful completion of the firmware.


After the firmware is completed, we do a full reset on the phone, enter the code * 2767 * 3855 # and wait for a full reboot

Using the code * # 1234 # you can check the firmware version.

Attached files

Fully driver flash driver and firmware. 7z(39.33 MB)
Fully driver flash driver and firmware. 7z(39.33 MB)

[kestua]

SAMSUNG_USB_Driver_for_Mobile_Phones.exe(15.27 MB)

1) swing:FlashTool_E2_ROU.rar(6.94 MB)

2) Install the driver
intel drivers for gt-c3530.rar(25.26 MB)


3) Run the FlashTool_E2.exe program in the ADD FILE field and add ALL the firmware files .:

C3530XEKA1.rar(34.18 MB)

C3530XEKI1.rar(33.86 MB)



In the file menu, select USB map wizar, click Old Default, next.
Next, you need to drive the phone into the boot mode, for this we turn off the phone, on the switched off device, simultaneously press the asterisk and the on / off button ...
And we connect with the computer using a cable. The software should find the phone and then press Done and unhook the phone
4) Carefully consider whether the tick "� Customer Order ’" is worth it, if not, then by all means set!
5) Choose "Infineon USB Driver"
6) In the drop-down menu, select "Unconditional erase each area before write (default)"
We click Next, in the appeared new window we press start usb1
7) We juggle the battery, drive the body into the boot again, and cling to the computer with a cord
8) We are waiting for about 10 minutes, and everything, we are happy with the stitched phone =)
9) After the firmware, you need to make a pre-configuration, enter the code:
* # 272 * HHMM #
where hh and mm is the current time on the phone.
In the menu, select SER (Russia) or SEK (Ukraine), wait until the phone is rebooted.
This code is similar to a full reset!
!!! After the preconfiguration, the tags are read normally, and the necessary Internet profiles are immediately set !!!

codes:

* 2767 * 3855 # - hard reset-Full reset
* 2767 * 2878 # - Custom Rese-reset user settings
* 2767 * 8451 # - reset code on SMS.
* # 1234 # - software firmware version
* # 0228 # - battery information
* # 3633284 * # - headphone emulation (for radio without a headset)
* # 02263 # - range selection (1800..900 ... etc.)
* # 32436837 # - DAI ON (Digital Audio Interference)
* # 3243948 # - DAI OFF
* # 7353 # - Test speakers, clavs, vibers, cameras and bt
# * 3888 # - Bluetooth test (which makes it not clear, but requires a reboot after)
* # 22766 # - Auto call reception
* # 227633 # - Manually accepting calls

SCRIN

Attached files

C3530XXJK3.rar(34.2 MB)


Post has been editedUncle - 20.08.16, 15:01

[izmalkoff]

M

The topic has been moved to the "Firmware" section.

[kestua]

After the firmware, you need to make a preconfiguration, enter the code:
* # 272 * HHMM *
where hh and mm is the current time on the phone.
In the menu, select SER (Russia) or SEK (Ukraine), wait until the phone is rebooted.

[dyadya_vanya91]

Hello. I had a problem in that the phone just rebooted. I stitched it according to the instructions from kestua, for some reason it did not give the result. And I tried Danil @ com with the first try.
So the question is, what did I do wrong? for example, I missed this point:

6) In the drop-down menu, select "Unconditional erase each area before write (default)" and the next one also missed

"In the file menu, select USB map wizar, click Old Default, next.
Next, you need to drive the phone into the boot mode, for this we turn off the phone, on the switched off device, simultaneously press the asterisk and the on / off button ...
And we connect with the computer using a cable. The software should find the phone and then press Done and unhook the phone "

What is their essence? I'm just new to this business, I would like to know for the future! Thanks in advance)

Post has been editeddyadya_vanya91 - 31.10.15, 21:50

[samostav]

I managed to flash the phone in the second way. Tell me what is the latest firmware and how do they differ?

[samostav]

Generally dealt with the firmware and their versions. On this sitehttp://sgh.ru/static/firmware.htmlEnter the name of the firmware and get all the info about it and the release date

Interpretation of firmware C3530XXKA1
Firmware Version: C3530XXKA1
Phone Model: Samsung C3530
Country: Austria, Belgium, France Germany, Hungary, Italy, Spain, England
Month and year of manufacture: January 2011
Revision Number: 1

Interpretation of firmware C3530XXKI1
Firmware Version: C3530XXKI1
Phone Model: Samsung C3530
Country: Austria, Belgium, France Germany, Hungary, Italy, Spain, England
Month and year of release: September 2011
Revision Number: 1

Deciphering firmware C3530XXJK3


Firmware Version: C3530XXJK3
Phone Model: Samsung C3530
Country: Austria, Belgium, France Germany, Hungary, Italy, Spain, England
Month and year of release: November 2010
Revision Number: 3

Interpretation of firmware C3530OXEKA1


Firmware Version: C3530OXEKA1
Phone Model: Samsung C3530O
Country: Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine
Month and year of manufacture: January 2011
Revision Number: 1

Firmware Version: C3530OXEKK1
Phone Model: Samsung C3530O
Country: Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine
Month and year of release: November 2011
Revision Number: 1

Firmware Version: C3530OXEKA1
Phone Model: Samsung C3530O
Country: Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine
Month and year of manufacture: January 2011
Revision Number: 1

Interpretation of firmware C3530XXKI1


Firmware Version: C3530XXKI1
Phone Model: Samsung C3530
Country: Austria, Belgium, France Germany, Hungary, Italy, Spain, England
Month and year of release: September 2011
Revision Number: 1

In general, I am still stitched on the C3530XXKI1, it is the last with those that I managed to find.

Post has been editedsamostav - 06.11.15, 20:40

[Danil @ com]

This is the latest firmware version. I understand there are 2 ways, someone liked my and someone else and not mine))) In general, the latest firmware is possible and Russian.

[CoalChamber]

Good day to all! Dear kestua, flashed the phone according to your instructions and found a few errors !!!
1) p.7 of your instruction - no need to juggle the phone, because we get a semi-brick) the phone does not turn on after the firmware is completed !!! It must be skipped for a successful firmware.
2) p.9 you have written "enter code: * # 272 * HHMM *" at the end you need to change the asterisk to the grid because the code presented by you does not work. It must be so * # 272 * HHMM #

It is worth fixing so that other people do not have any mistakes) And I also hope that my experience will help someone.

And of course, thank you very much for the information provided and the files you have posted!

[Kalyan_]

Brought the phone with the code to lock sim,
Pegasus reads the tel code. calculates the code unlock, but when you enter the read code - writes "not the correct code"
the firmware above gave nothing,
Is there a full to flash another section responsible for security and blocking ???

[Nik0la013]

In, the same theme. Tell me, if the way to unlock a sim without a programmer? Now in the army, so it’s not an option to buy all sorts of z3s, or whatever it is called)). But there is access to the computer and the Internet.

Post has been editedNik0la013 - 14.01.16, 00:44

[AMIGO_ept]

It was a block, removed, using the firmware.
But now when I insert SIM - it requires a PIN, although the PIN is not installed.

[Rombil]

I asked for Danil @ com - everything is fine. Respect the author. : thank_you:
The phone was re-flashed in order to get rid of the pre-installed games - class, no games! And the item "download games" is also not. And everyone is happy: happy:

[samostav]

Brought again this phone with a problem, when you enter the menu Pictures or Video, it overloads. I found an item in the phone menu - full reset, the phone requested a password. What kind of password I do not understand, I tried the standard 12345, etc., but it works. The owner of the phone, also does not remember the password. In general, I decided to sew again when I see that the key combination for a hard reset and so dropped everything on the drain, to the factory settings. Glitch from the Pictures menu, started after something was downloaded from Ineta. So I suspect that just a picture of the wrong format or resolution downloaded.

[citroen @]

samostav
completely hard through the combination will clean the entire phone.
*2767*3855#

[verbichenko.s]

Good morning! : blush:
No one tried to patch the device, it is interested in a specific patch, which gives vibration when the receiver picks up the phone
I know that on s5610 there is this.

[citroen @]

verbichenko.s,
There are no patches on it. Perhaps the platform does not allow patching.

[_Steelwolf_]

Good day, dear forum users!

The question is, I recently had such a problem. The phone has stopped making calls and being available on the network. Moreover, the signal indicator shows the full scale. When you try to select an operator, the phone quickly gives "Forbidden". When you try to call - "Failure". An arbitrary amount of time passes and the caller receives an SMS about the availability of my number. Apparently, somehow earned time. And again everything is in a circle.
He took a sim card and inserted it into another phone - it works. I took other SIM cards and inserted into c3520 - 2 Tele2 SIM cards work, 1 MTS earned at the very beginning, then everything was the same.

I have already tried a hardware reset through the service code. Did not help.
If the problem was in the malfunction of SIM cards, it would not work anywhere, and in general the phone would immediately say that there is no SIM card. Contacts podgibal slightly in order to exclude the absence thereof!
I decided to try to reflash. And then stuck.
And where is the firmware to take? And how to determine the latter? Or they have not been stamped for a long time? I have version C3520XELG1 CSC C3520OXELF2.

[citroen @]

_Steelwolf_,
firmware last. Try setting the operator manually in the settings. and play with a range ....