I bought a Tenda N630 v2 router on aliexpress Wi-Fi, tell me which firmware to install on it. I came with English firmware, I can’t configure it either.

In fact, the site in Russian in Russia is already quite a while. And adaptive dumb firmware.
Will wait.

Post has been editedmajlisaj - 24.02.17, 04:11

I bought a Tenda AC6 router. Tell me the address - where you can download the latest firmware.
Thanks in advance.

On the official site, something is not at all thick, apparently still in the process of filling.
I took the N630 and N318 to see the BCM5357 chip - in theory, you can fill OpenWRT, but with the memory it is not clear how many RAM and flash drives.
N630:
RAM: M13S128168A - 2MС…16bitС…4bank - 128M
Flash: kh25l1606e - 16Mbit - 2 megabytes chtol?
N318:
RAM: EM638165 - 4Mx16bit - 64M
Flash: md25d80sig 8Mbit - 1 megabyte

There are very few flash drives - you can’t stick anything sensible like DD-WRT and OpenWRT
I think I can try onW25Q128- 128Mbit - 16Mbyte replace

Post has been editedNeiroNx - 02.03.17, 10:52

All firmware will be released on the official website of Tenda (www.tendacn.com). The current firmware is installed on the AC6 model at the factory, approximately in the middle or at the end of March (according to the plan) the firmware will be updated for all AC line models. The key change will be the addition of the Russian language to the firmware of the routers.

Posted on 03/03/2017, 09:22:



The official website (www.tendacn.com) contains all the models of devices supplied to the territory of the Russian Federation. The devices you indicated were made for the local Chinese market (it is also likely that this is a fake). Technical details, if necessary, I can ask specialists at the factory.

Hello. There is a Tenda F300 router. Need to reduce wifi power. I did not find this in the settings. What can be done ?

Router Tenda AC6. Periodic shutdown of the Internet via WIFI and PC for 2-3 minutes. Itself resumes for a while and again "reboot". The firmware is fresh, it was installed from the factory.
Please help.

if ip on the computer and other devices automatically, then try to manually set

On Monday I will send a request to those support.


Bought in Russia or abroad? If you bought in the Russian Federation, I recommend passing it to a service (RCC service) for a test, possibly a marriage. Also check if auto-restart on time is enabled! It would also be nice to know what your Internet provider is.

Ps. At our office, now we have WiFi via AC6 in our office, it works without problems.

Yes, but even if it includes an automatic reboot, it lasts once a day for a minute, not 2-3. There is something with the settings of the provider most likely.

Post has been editedmajlisaj - 04.03.17, 17:20

bashaero
have you tried to do this? and what firmware is it worth?

The router is purchased on aliexpress. No warranty. Internet Service Provider - Bashinfor Ufa. Used a Tenda F300 router. There were no worries. Firmware from the factory V15.03.4.15. I did not manually set IP - it seems useless, because rebooting the router, not devices.

Try to roll back to V15.03.4.11 I have tokay now. Although I tried the last one like yours. But I did not notice the changes and rolled back. My only thing, the system time, does not set correctly, according to the time zone. And the latest firmware did not solve this issue.

Post has been editedmajlisaj - 04.03.17, 22:33

Good day, there is an ADSL2 + Tenda D301 Router, will there be a Russified firmware on it?

Thanks to all. It seems to have found a malfunction - changed the power supply. Almost 2 days working flawlessly. I left the firmware from the factory.

TESTED PERSONALLY, WORKS.
TENDA firmware: (W308R, F300, N301, (N300-304 v2, N630 v2 (Made in China))
Attention !!! Not to be confused with fakes on the MEDIATEK chip.
The firmware is fully translated into Russian.
Improved performance and performance.
Firmware Version: V5.07.64.4 RU
1. Turbobit
2. Wayupload
3. Depositfiles

Attention !!!

1. Failure to follow the update guidelines may result in damage to your device.
2. Updating the firmware only on version number V5.07. *. * You can install this firmware.
3.Please update your devices via cable connection.
4. Do not turn off the device when updating, do not open the cable until it is fully loaded.
5.Please unzip the firmware file you downloaded and use files with the extension “.bin” or “.trx”.
6.After updating, please restore the factory settings and reconfigure the device.
7. It’s better to update via Internet Explorer.

I post here mainly for those with routersmade for china
and are not certified in Russia and Kazakhstan, as well as a list of routers that are similar in parameters.
On the official website (Russia & Kazakhstan) there are no data on routers N300-304 v2, N630 v2 (Made in China).
In the near future I will post a complete dump of the router firmware Tenda N630 V2.

Post has been editedVitamaximys - 07.03.17, 09:47

This firmware version is on the TENDA official website. I strongly recommend taking the firmware there.

Posted on 03/06/2017, 15:14:


Good afternoon, for all current models, a translation will be prepared. However, I can’t name the terms for the ADSL line yet.

In this router model, this function is not supported, the signal power does not decrease.

CLONE_2000,
C clever, but to dig into the binaries and compare which firmware fit the router could not?
I post here mainly for those with routersmade for china
and are not certified in Russia and Kazakhstan, as well as a list of routers that are similar in parameters.
On the official website (Russia & Kazakhstan) there are no data on routers N300-304 v2, N630 v2 (Made in China).
In the near future I will post a complete dump of the router firmware Tenda N630 V2.

Post has been editedVitamaximys - 07.03.17, 08:45

I would like firmware for n630 v2