Assistant
REPLY |
Nomi C07850 - Firmware |
Message#1 23.03.15, 20:11 | ||
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | Nomi C07850 / A07850 - Firmware Description | Discussion � | Firmware � Important information Drivers and Utilities Drivers for MTK -Download The program for the firmware SP Flash Tool -Download Getting root permissions for any Android device -Download (off site) Theme MTK Droid Tools - WinXP-win7 application for getting root, creating backup and much more on android from 2.2.1.Download BatchTool - A07850 firmware programdownload Firmware A07850 I bring to your notice that I do not own A07850, and I don’t have it either, so that I can figure out what and how! And therefore I ask for fewer questions about the tablet A07850! I got the firmware, for which you can say thank you) Read the instructions for the firmware, since tablets A and C have different processors (RockChip and MediaTech), respectively, different firmware methods! According to the representative of HALLO, the priority for firmware, firmware v2 V1 Firmware -download Firmware V2 -download Firmware C07850 Compatibility of firmware and touchscreens Official firmware Modified firmware C07850 [color = blue]Modified firmware (Internal memory 4.37Gb, USB Drive 1.18Gb): V1 firmware - (Download) V2 firmware - (Download) I can not put Ruth on these firmware, I solve the problem ... (Root can not be put after redevelopment, I think how to fix it) Solved a problem,First, we flash the firmware with the redesigned one, then put the root through kingo root and flash the boot (if you want you can still recover) Before the firmware, watch the spoiler "Instructions" for sure! You can find out what memory chip you have bythis video The table by which you can select preloaderhere Preloaders are locatedhere Other C07850 Getting root permissions for any Android device -Download ���������������� boot.img ������� ������ ������� SD ����� � USB-����������* : downloadFor firmware V1 - (Download) For firmware V2 - (Download) Re-partitioning the file system (Internal Memory 4.37Gb, USB Drive 1.18Gb): For firmware V1 - (Download) For firmware V2 - (Download) * If you flash this boot.img, then the tablet will think that it has a USB drive Video Instructions Tablet firmware - I'll record it soon with a normal sound How to replace memory? (Expand memory with a memory card) - I'll record it soon with a normal sound How to open / open tablet?(video is not very good, I recorded sleepy, at night, the guy from the forum asked) - recorded a new one, I’ll post it soon How to find out what memory chip (RAM / RAM) on the tablet Nomi c07850? How to open the tablet Nomi A07850? Instructions Firmware s07850 - Preloader do not flash! Before flashing, remove the preloader from the firmware !!! Stitch through Download Only everything except PRELOADER 1) Find out what memory chip (RAM / RAM) on the tablet Nomi c07850 2) Table by which you can select a preloaderhere(If your tablet is not there, write to me in PM) 3) Download your preloaderfrom here 4) Move the replacement preloader to the folder with the firmware with the replacement, and you can safely flash the tablet Firmware A07850 - Detailed instructions for flashing Copy-paste firmware, since there is no tablet on hand And to figure it all out for yourself! Everything you do, you do at your own peril and risk! The author of the topic does not bear any responsibility! Well this is so for your information, if in each sho Preloader for a not needed !!! Download RKBatchTool and extract from the archive (preferably to the root of the disk). Turn off the tablet (by long pressing the power button and selecting the appropriate option when a message appears). Connect the USB cable directly to the rear ports of the computer, bypassing any hubs and extension cords. It is also better not to connect to the front ports of the system unit. If there is a better-quality micro USB cable, use it better. Connect the other end of the cable to the tablet while holding the volume up button on it. In Windows, you will be prompted to install a driver for the new device. The drivers are in the folder RKBatchTool \ RockusbDriver \, select the appropriate one for your version of Windows and install. If something goes wrong, you can install the driver manually by right-clicking on the desired inf-file and selecting the "Install" option. Unzip the selected firmware and transfer the only img file with it to the folder to RKBatchTool. Be sure to disable all antiviruses and unload unnecessary programs. Run RKBatchTool.exe. If everything is in order, the driver is installed correctly, then the digit "1" in the Connected Devices field should be green. Click on the "..." button opposite the FW Path field and select the firmware file. Click the Upgrade button (second from the bottom) and wait for the completion message. The firmware takes an average of 5 minutes. Question answer 1) Q: I have flashed the tablet and the white screen. A: Try a friend firmware version. There are only two of them, V1 and V2 2) Q: Installed the driver, but the computer does not see the tablet О: Most likely the problem is in the USB cable, try with another cable О: If the answer above did not help, try inserting the cable into another USB port (if pc, preferably into the back) 3) Q: I stitched the tablet, and it zakirpichilsya (does not turn on and does not even respond to charging) A: With the firmware, another preloader was used. Try to flash the appropriate preloader О: If it does not work out just flashing with preloader, you need to flash the tablet using Test Points 4) Q: IMEI has flown, what to do? О: You can restore IMEI through the programMTK Droid Tools Questions and answers will be supplemented upon receipt of questions. Solutions from users The guys need help ... They brought the device C07850 with an MT8312V processor ... S / N 1001000000045877 memory 2 by k48g1464d Brick ... the driver is installed correctly (Win10) ... the flash unit swears 4032 !! There is a red stripe 100% and then an error .... I tried two versions of the firmware ... I tried to fill in the preloader without a result ... help how and with what to understand !!! P.S problem solved !!!! not attentiveness)))) this memory is applied for two options at 1024 and 512 !!! Preloder came from 512 !!! K4B4G1646D-BCKO SAMSUNG DDR3 256 * 16 (D 代) 4.2 / 4.4 DDR3.512MB.2x8BIT 512M !!! [email protected], 13:13 I could not flash because of the old SP_Flash_Tool_ I downloaded this SP_Flash_Tool_v5.1540.00 I did everything as I connected the tablet to the PC in the header, I pressed the volume button + and everything went wrong List of changes in the topic 15.05.15: Added by:
16.05.15: Added by:
11.08.15
06.09.15
There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedCusco - 09.03.18, 17:48 Reason for editing: TWRP for C07850 | |
Message#2 20.04.15, 10:51 | |
a guest [offline] Group: Users Messages 3 Check in: 20.04.15 Nomi C07850 Reputation: 0 | Good day! On the tablet is the processor MT8312, and the firmware is specified percent MT6582, the tablet will not die from such a mismatch? |
Message#3 20.04.15, 11:53 | |
a guest [offline] Group: Users Messages 3 Check in: 20.04.15 Nomi C07850 Reputation: 0 | I asked for the tablet, the tablet does not turn on and does not see the computer, |
Message#4 20.04.15, 15:53 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | madrid1985, This is a fake processor, I have everything okay and a few more guys. There is one firmware directly from the SC (I was thrown off so I could flash my tablet) Posted 04/20/2015, 15:48: madrid1985, What firmware was stitched? Posted 04/20/2015, 15:53: madrid1985, write in QMS, try to solve the problem -------------------- You may know me howMapa3m1 |
Message#5 20.04.15, 16:17 | |
a guest [offline] Group: Users Messages 3 Check in: 20.04.15 Nomi C07850 Reputation: 0 | stitched with firmware that is specified above in this section, the one that is labeled "recommended"; after flashing, the screen lights up in blue seconds5 and goes out. In the device manager, when connected, shows the connected Linux device. I tried to flash it again with the same firmware — it doesn't even try to sew. |
Message#6 20.04.15, 17:22 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | |
Message#7 27.04.15, 20:23 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | Tell me please, has anyone already tried to swap memory, or to re-size Scatter as instructed? Everything really works. I'm afraid to screw up the firmware. |
Message#8 28.04.15, 16:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | |
Message#9 28.04.15, 18:57 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | |
Message#10 29.04.15, 18:23 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | I tried to remap the memory, did not work. The drivers became normal, the program saw the tablet, but the operation ended with the error "PMT changed for the ROM; it must be downloaded." |
Message#11 29.04.15, 21:05 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | Tell me, but if you do a memory replacement, where does the usb drive change from micro sd, then the internal memory (for installing programs) remains the same (within 1 GB)? Only the cache can now be saved to micro sd. Do I understand correctly? And how to expand the place to install the programs? I tried the method with the redistribution of memory, it did not work out, I described the error above. |
Message#12 29.04.15, 23:08 | |
a guest [offline] Group: Users Messages 3 Check in: 27.10.14 Samsung Galaxy A7 (2018) SM-A750FZ Reputation: 0 | In kogos bulo taka, scho after flashing firmware better display psdsvitka? And with the shiv of the firmware. |
Message#13 29.04.15, 23:52 | |
Visitor [offline] Group: Users Messages 11 Check in: 08.02.12 Motorola BACKFLIP Reputation: 0 | so taka situation itself tÑ–lki pÑ–dsvÑ–tka |
Message#14 30.04.15, 23:50 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | andriyko92, kideap, I need another firmware, I will ask the SC. write your serials to me (S / N on the back of the tablet) Posted 04/30/2015 23:45: Saturn_94, No, when flashing the re-sized scatter, the memory layout of the phone changes, Internal memory (for installing applications) becomes 4.37Gb, and USB Memory 1.18Gb. And with the boot.img firmware, the USB drive is switched to 1.18Gb with a microSD card. That is, you have a 32 GB memory card, the internal memory (for installing applications) becomes 4.37Gb, USB 32GB drive, microSD 1.18Gb (the size can be made smaller, but if you make a backup to the SD card, you do not have enough space) Posted 04/30/2015 23:50: Saturn_94, You need to flash EBR1, EBR2, MBR along with the boot, that is, insert the folder with the firmware with replacement EBR1, EBR2, MBR, boot, scatter (Downloaded earlier), and in the SP Flash Tool choose the scatter from the folder with the firmware.PURSE ONLY THROUGH FORMAT ALL + DOWNLOAD(Otherwise there will be an error "PMT changed for the ROM; it must be downloaded.") Unsubscribed in the SC, they think they will answer ... Or they will be sent to 3 letters, or they will throw off the firmware) Post has been editedqwerty12345554 - 30.04.15, 23:58 Reason for editing: Unsubscribed in SC -------------------- You may know me howMapa3m1 |
Message#15 30.04.15, 23:58 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | I tried to flash the re-allocated scatter, for some reason it did not give me. I now have internal memory - 0.98 GB, usb drive - 4.62 GB, micro sd 32 GB. Tell me, if I ask for boot.img that swaps memory, what result will I get? Post has been editedSaturn_94 - 01.05.15, 00:09 |
Message#16 01.05.15, 00:12 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | Saturn_94, You will have the Internal memory (for installing applications) to get 4.37Gb, USB 32GB drive, microSD 1.18Gb. Replacing the memory card and USB drive + re-marking the memory of the tablet - You need to flash EBR1, EBR2, MBR along with the boot, that is, insert the folder with the firmware with the replacement of EBR1, EBR2, MBR, boot, scatter (downloaded earlier) and in SP Flash Tool choose scatter from the folder with the firmware. PUSH ONLY THROUGH FORMAT ALL + DOWNLOAD (Otherwise there will be an error "PMT changed for the ROM; it must be downloaded.") If it doesn't work out, wait for the end of May days, I will record the video ... -------------------- You may know me howMapa3m1 |
Message#17 01.05.15, 00:12 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | qwerty12345554, [email protected], 23:50 You need to flash EBR1, EBR2, MBR along with the boot, that is, insert the folder with the firmware with the replacement EBR1, EBR2, MBR, boot, scatter (Downloaded earlier), and in the SP Flash Tool choose the scatter from the folder with the firmware. PUSH ONLY THROUGH FORMAT ALL + DOWNLOAD (Otherwise there will be an error "PMT changed for the ROM; it must be downloaded.") That is, re-marking of memory is possible only with a full flashing of the device. But based on the fact that the firmware that has been laid out so far few people have approached, you will have to wait for the worker on our firmware device. |
Message#18 01.05.15, 00:14 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | |
Message#19 01.05.15, 00:17 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | qwerty12345554, [email protected], 00:14 That's right, discard your serial number. S / N: 100100000038624 |
Message#20 01.05.15, 00:21 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 115 Check in: 27.12.11 Samsung Galaxy S7 EDGE SM-G935 Reputation: 9 | Saturn_94, your 100100000038624 mine 100100000038603 Most likely you will go firmware, but better make backup Post has been editedqwerty12345554 - 01.05.15, 00:34 -------------------- You may know me howMapa3m1 |
Message#21 01.05.15, 00:34 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.01.10 Reputation: 0 | qwerty12345554, [email protected], 00:21 your 100100000038624 mine 100100000038603 Most likely you will go firmware, but better make backup Tell me, how did you backup on your tablet? As I understand it, in the header it is from your tablet backup. |
mobile version | Now: 04/12/19, 15:17 |