[X]Assistant

[kovalDN]

Talk smartphone firmwareNokia Lumia 525
Nokia Lumia 525 / RM-998
Smartphone: Description | FAQ | Discussion пїЅ | Accessories пїЅ | Marriage пїЅ | Purchase пїЅ
General: Ambulance for beginners пїЅ | OS FAQ | News Talk пїЅ | Windows phone club пїЅ | GPS navigation пїЅ
Firmware: General flashing questionsпїЅ | Firmware database | Creating and editing firmware пїЅ

The topic discusses the issues of firmware (official and unofficial, if available) for the Nokia Lumia 525, the problems of these specific firmware, their shortcomings and other issues related to these firmware, the issues of their flashing, repair via Jtag (other similar equipment), and optimization official firmware and the creation of unofficial firmware for these devices.

Utility for firmware:

• Instructions for resetting Windows Phone settings
  
• Instructions for resetting settings from Microsoft
  
• Instructions for disabling the "democratic" mode and then resetting the settings
  
  Exit demo mode:

  1. Make sure the screen rotation is enabled on the device.
     
  2. Go to settings ->device information ->Click "update demo", a confirmation message appears (do not click "yes").
     
  3. Hold the device upright.
     
  4. Rotate the device 90 В° to the left.
     
  5. Return the device to its original upright position.
     
  6. Rotate the device 90 В° to the right.
     
  7. Return the device to its original upright position.
     
  8. Click "yes" in the message that appears and agree to restoring the factory settings.
     
  9. After a while, the device will reboot and the device will boot into the welcome menu.
     
  10. After restoring the settings, the device will work as normal.
      
  11. After the whole procedure, in the information about the device, instead of the button "update demo", the button "reset settings" appears.
      
  
  
• Instructions for flashing from Microsoft
  
• Instructions for flashing Nokia Lumia smartphones
  
• Information about the latest firmware from Microsoft
  
• Information about the latest update from Microsoft
  
• ImgMount Tool unpacking firmware (FFU)
  
• Collection of official firmware
  
• Links to firmware
  

Product Codes:

Product Codes Nokia Lumia 525 (RM-998)

Model:

Nokia Lumia 525 download

Product-RM: RM-998
Product Codes:
059V2V1: RM-998 PWBASSY LIGHT SWAP ENGINE GLOBAL
059V2V2: RM-998 GLOBAL SWAP
059V466: RM-998 VAR APAC CN UNICOM
059V486: RM-998 VAR APAC VN CV
059V4T6: RM-998 VAR APAC KH CV
059V4T8: RM-998 VAR IMEA IN CV
059V535: RM-998 VAR APAC MY CV
059V536: RM-998 VAR APAC SG CV
059V570: RM-998 VAR EURO 6A CV
059V579: RM-998 VAR EURO RU MTS
059V5J7: RM-998 VAR APAC HK CV
059V6D8: RM-998 VAR IMEA 4Y CV
059V6G1: RM-998 VAR EURO TR CV

Encountering firmware versions:

Engineering (service) codes:

Engineering (service) codes (dialed in dialer dialer):
## 07 # - menu of general settings of the device (item optional);
## 3282 # - device service network settings menu (Field Test);
## 634 # - menu time of use / call counter and specify the color of the device (Life Time);
## 4678255 # - data menu for pre-installed (OEM) applications on the device (Multivariant Stats, Tier3).
Attention!Some codes do not work on firmware for different regions.

Utility for repair:

• Touchscreen repair experience on the phone
  

Additional utility:

• Microsoft support
  
• Jailbreak (unlock) on Windows Phone пїЅ (FAQ)
  
• Windows Phone - Programs
  
• Windows Phone - Games
  
• Windows Phone - Ornaments
  
• Windows Phone - Development and Programming
  
• Windows Phone - First Aid
  
• Update Windows Phone 8.1 (FAQ) / Preview for Developers (FAQ) discussing general issueshere пїЅ
  
• Windows Phone 10 Technical Preview Update We Discusshere пїЅ
  
• Memory menu item Other / Temporary files and its release are discussed.here пїЅ
  
• Questions on the SIM-Lock askhere пїЅ
  
• Talk memory cardshere пїЅ
  

Attention! Hereprohibiteddiscussion of issues that do not fall under the theme (Offtop),
including a discussion on the device itself, the system as a whole, firmware for other devices,
as well as the creation of messages that do not carry useful information (flood)!
Also try to avoid in your messages lyrical digressions and reflections on the meaning of life!
For open conversations we have the relevant sections.

_{On a note:}

Forum FAQ | How to search the forum? | 10 commandments novice | Selection and comparison of PDAs and smartphones
How to clean the image under the spoiler

Dear users, be mutually polite, say "Thank you" by increasing your reputation (). If you do not have 15 more useful posts, ask the moderators to raise their reputation by pressing the buttonunder the message of who helped you and who you want to raise your reputation.

And do not forget aboutForum RulesandRules section "Windows Phone - Firmware"! : rtfm:

Post has been editedkovalDN - 18.03.15, 11:53

Reason for editing: Links

[Kunfu panda]

egorka360,

did it help?

[kps1984]

kps1984
Hi, I want to share with everyone the solution of the Qualcomm HS-USB QDLoader 9008 problem on the Nokia Lumia 820 RM-825 did everything as Mazapek wrote, for which I thank him very much, but everything ended before the red screen appeared with an EMS Error error and then I disassembled the phone and warmed up the qualcomm chip RTR8600 which is under the iron screen, you need to remove it before warming up with a Lukey 702 thermo hairdryer heated to 310 degrees Celsius AIR slightly more than half of the amtech rma-223 flux was warming for about a minute.

Posted 10/06/2016 13:11:

P.S phone started without firmware

Attached images

[Dimon Rukozhop]

The problem is this, the phone does not turn on at all, when connected to the computer, the vibration is triggered, the Nokia inscription lights up for about a second and turns off and so on in a circle. Is it possible to recover?
** When connected to charging, the battery lights up and the plug flashes, then the battery disappears, but the backlight on the screen continues to burn, the phone heats up at the top

Post has been editedDimon Rukozhop - 19.07.16, 19:10

[vil77]

Last week there was some good news. On the lumia 525 you can put an android. And not only on 525, but possibly others.HERE

[AlexashaBolduin]

He then died: lol:

[zEn_msk]

help restore the phone
after an unsuccessful firmware, it stopped turning on, but was detected by the computer.
according to the instructionsLumia 525 - Firmware (Post Mazapek # 49819210)began to recover, everything went well
but after the command "thor2 -mode emergency -hexfile C: \ dump \ yourhex.hex -mbnfile C: \ dump \ gpt.bin -orig_gpt" the phone rebooted and the inscription appeared nokia and everything now hangs on this text, the computer does not appear, even if you press vol- + pwr ..

everything, you can forget about him?

upd: disassembled closed the resistor on gnd, installed the driver, all my attempts to fill in hex and gpt
end with the phrase "correct HEX file."
I have already tried different firmware, tried a bunch of hex - others hex does not even want to upload ..

Post has been editedzEn_msk - 13.11.16, 22:11

[Radek116]

Good time of day! TA Nokia Lumia 535 RM-1090 is defined as Emergency Connectivity. Not incl. on pr. does not react.
I tried to restore as written, Mazapek "message 19", but I can not find the .hex file for my phone, can anyone have or give a link?

[Mazapek]

zEn_msk,

Here, the guys asked questions at Microsoft,They write that the matter is in a discharged battery: https: //answers.micros...d-fde2ca5e34c7? page = 99

Question on: Reset the device and use the correct HEX file

It's ok
Just give it some time to charge. It will go to UEFI flashing mode (Nokia red screen).
After that, you can start normal flashing.
My congratulations!
* On my RM-892 already WP installed and running again

Now the Start button is flashing, it is no battery juice.
I'll keep it connected to the AC plug for a while.
WOOOOWWWW, it just got the RED screen.
Thanks guys, you're the best!

got the red screen too .. i'm @ 16% uploaded.
Sweet Ba-jeebus, I think I got my phone back. Gotta give it a copy of the hex files.
And, of course, we’ve been trying to keep it up.

Translate here: translate.google.com

Still various topics with discussions

Read the original recovery theme:

http: //forum.xda-devel…-unbrick-jtag-t3082592

But a person has a similar situation as you have:

http: //forum.xda-devel...=60458401&postcount=54

We do not really people soar with these phones, one I can not tell everything, you need to go deeper. Judging by the mistake, you did the wrong hex. Although if the phone started to be sewn for the first time, it is very strange.
I do not remember, but I had a similar situation with Hex, I still could do it.

Lumia 925 does not turn on (Post x_noname # 52547331)Here's another topic like

http: //www.gsmforum.ru...ndex.php/t-221095.htmlAnd here's another:

try running the command several times
thor2.exe -mode emergency -hexfile C: \ rm.hex -mbnfile C: \ msimage.mbn -orig_gpt
I ran 4-5 times, did not know that there should be errors, as a result, the bodies lit up with the red logo of the Nokia, did not disconnect from the cable, did not distort the battery

Post has been editedMazapek - 06.12.16, 08:52

[zEn_msk]

Mazapek,
Thanks for the advice, it does not help, it does not charge through the phone, it is fully charged through the frog

maybe this is due to the fact that I am torturing only the mother, the display / touch / and so on are disabled?!, because with them it is not convenient to close the contacts to enable the 9008 mode

Post has been editedzEn_msk - 06.12.16, 13:15

[Mazapek]

zEn_msk,

Accurately through the frog charged? The frog could charge acb up to 1%, but more is needed for the firmware ... Does it show 3.8 volts on the multimeter? Nokii are very picky about charge.

By the way:
I usually charge on a laboratory power supply, like this:http://www.25gsm.ru/vl…/bloki_pitaniya/22899/, everything can be seen on it simply, I set a voltage of 4.2 volts and a current of about 0.90A, then I look at the volts on the battery, if 4.0 shows, it is almost charged, then the current can be lowered.

Of course, as an option, because of the disabled tachey, you have to try everything in the collection.

I am sure that you have a working phone, you need to find a way!

Post has been editedMazapek - 08.12.16, 12:12

[LightingBoy234]

zEn_msk,
How is computer determined?

[zEn_msk]

LightingBoy234,
Defined as Emergency Connectivity.
I haven’t done anything else yet, it’s necessary to measure the voltage, the frog can really not recharge, but so far the hands do not reach.

[TurbojetEngine]

It is possible to buy a RM-997 board, thereby restoring the phone’s performance. Will the firmware on the phone from the RM-998?

[herenok]

Help people - I didn’t find anything here. I want to completely format the pipe and install RM-988 from scratch. Tell me or refer to

[logic777]

Good time of day.
The problem with the subject is as follows. Sometimes the touch falls off. Helps to pull out the battery. After such a reboot with a probability of 60-70% of the touch works until the next glitch. The touch did not change, but shot when I changed the display. Although we could have changed me, I do not know.

Question. Can there be a problem in the firmware and, accordingly, by flashing it to solve it?

Thanks in advance.

[kolard8888]

Hello people !!! Help put on this device Windows 10 ...

[kovalDN]

Kolard8888 @ 05.05.17, 11:01

put Windows 10 ...

Windows 10 Mobile / Insider Preview on unsupported devices

[nikitashklon]

Lumia 525 - Firmware (Post Mazapek # 49819210)
I tried to raise nokia lumia 630 (rm-976) did not work, apparently did not catch up on the merger of hex files, it is possible in more detail how I need to fit it from the gpt1.bin and gpt0.bin files so?

[reysner88]

Guys, tell me nokia 525 rm-998 when you turn on the inscription mts, I understood it under the operator is locked. The point is that there is a password for unlocking the device, it is loaded to the desktop and asks for a 5-digit password, I can not remove it, hard reset as instructed, you must press the buttons during the exclamation mark alternately: gr. Up gr. Down button on gr. Down further The gear image should follow. but when the first button on the top is pressed, the device restarts. what am i doing wrong

[kovalDN]

reysner88 @ 07/09/17, 08:38

When you turn on the inscription mts, I understand it under the operator is locked

This is such a firmware, MTS has no SIM-Lock.
reysner88,
You can try to completely reflash in one of the standard ways.