[X]Assistant

[JekaSs86]

LG G Pad 10.1 - Official firmware (OS 4.4.2)
v700
Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

Drivers (of.sayt). Mirror:Indeks disk

LG Flash Tool 2014. Mirror:Indeks disk

LG Root Script v1.2.zip(4.81 MB)

Official firmware

4.4.2[V70010C]. Mirror:Indeks disk
5.0.2[V70020A]. Mirror:Indeks disk

Instructions

Everything that you do - you do at your own peril and risk!

Instructions on firmware

Instructions taken fromXDAand checked by me onLG V700

1. Download the driver,LG Flash Tool 2014, well, the firmware itself. (All this is in the cap)
2. Install the driver, unpack the Flash Tool, and throw the firmware file into the Flash Tool folder.
3. Turn off the tablet.
4. Connect the tablet to the USB while holding the volume button up. Appearsfirmware menu
5. Launch the Flash Tool, select as onscreen.
Namely: Select Type - 3GQCT; PhoneMode - EMERGENCY; Select KDZ file - specify the path to the firmware fileV700 ** _ 00.kdz
6. Make sure everything is set correctly. We pressNormal flash.
7. It comes off herewindow. We pressSTART.
8. In the window that opens, select the country and language. I had this lookSo. Confirm by pressingOk.
9. Appearsfirmware window. On the screen of the tablet it looksSo.
10. We are waiting for the completion of the firmware. (10 minutes)

This method does not format the data section. If you need a complete "cleaning" of the device, do a pre-factory reset, the instructions below.

If you had a ROOT, it will fly off after the firmware. Repeat the procedure "root".

Instructions for resetting settings

If it so happened that there is no possibility to turn on the device and make a reset through the settings, this can be done not including the tablet.
Holding the buttonvolume downpushpower / lockand hold both buttons. After the appearance of the logoLGrelease buttonpower / lockbut continue to hold the buttonvolume down. Furthernot releasing the buttonvolume downpush buttonpower / lockandvolume upat the same time. Follow the on-screen instructions.
a photo
Video

ROOT Reception

Getting ROOT

Instructions for installing custom recovery

!!!IMPORTANT!!!This method worksONLYonKitkat
1. We get the root.
2. DownloadTWRP(currently 2.8.6.1)
3. Install the applicationRashr - Flash Tool
4. Just in case, we make a backup of stock recovery. ATRashrtop right buttonBackpack , then I think everything is clear.
5. In the main application menu, clickRecovery from storage, and choose the downloaded image.
* In order to get to TWRP we use the same application.Rashr

Topic onXDA
Of page

miscellanea

Turning off KnockOn (waking the screen by double tap): Go to Contacts. In the Search for Contacts field, enter 3845 # * 700 #, then click the plus sign in the upper right corner. The service menu will open, there we go Settings =>KnockOn On / Off Setting. I think what to do next, no need to explain.

Xposedworks without problems, but the ability to install it while there is only on Kitkat. With it, you can customize the stock firmware, almost beyond recognition.

Solving the problem of blocking free recording on SD

Need ROOT
First way: Download the applicationSDFix: KitKat Writable MicroSD . Run it and follow the instructions.

Second way: Install the TWRP Manager application. We launch it, in the menu we select Settings =>(scroll to the bottom) Apply SD Card patch =>Yes. The tablet will reboot, profit.

Screenshots

Post has been editedJekaSs1986 - 10.10.15, 23:53

[an545]

does not work

[Kwaker]

Here is the 1.2 and 1.3. Who does not rut through the standard - it will help 100%
Do not forget to install LG drivers.
I made a root through 10th Windows - it means that on the previous ones it will go with a bang.
ZY Attached a live wallpaper - it looks amazing on our device

Attached files

LG_Root_Script_by_avicohh.exe(4.76 MB)
Minima + Pro + Live + Wallpaper + v1.7.apk(302.38 KB)

[Ivannn11111]

Will cm12 on our tablet?

[Kwaker]

No, and never, rejoice that in general 5,0,2 released, and could score on our device

[Devillus]

Guys, and if you roll 5.0, then you can sew 4.2.2 on top? Tobish can roll back without any problems?
For 5.0 and 4.2.2, do you need to sew a root? Or you can reflash "as is"? thank

[wyra93]

Devillus
Is it possible to sew back I do not know ... Ruth needs to be sewn, but this is 2 minutes (it will just fly off).

[xFireWall]

You can roll back.
I put 5, did not like it, some kind of interface was not so responsive, chtol, rolled back, I did the only factory reset after that, otherwise it didn't enter the loop.

[FlashBackkeR]

Hurray, there are TWRP)

http: //forum.xda-devel...overy-2-8-6-0-t3112724

Looking forward to CM!

Post has been editedFlashBackkeR - 24.05.15, 21:45

[JekaSs86]

FlashBackkeR @ 05.24.2015, 21:43

Hurray, there are TWRP)

http: //forum.xda-devel...overy-2-8-6-0-t3112724

I tried it Tvrp, and either I have a hand from the wrong place, or it’s about the firmware, but I never could get into it no matter what applications I used. Out of whom?


========================================
UPD

The point was still in the firmware.
On KitKat works, checked! Roll back to check.

Post has been editedJekaSs1986 - 04.06.15, 18:16

[Andreicheg]

Guys .. through the air never arrives.
Another thing is when I check for updates - they say it doesn't exist.
And under "Check for Updates" does not write the date of the test, but writes that it has not been verified before.

I tried a full reset ... it did not help.

[JekaSs86]

Andreicheg @ 06/10/2015, 10:57 PM

does not fly through the air.

This is yes, still no. I wait, as it is possible after the update, there will be a TvRP and there will be a Lolipop.

Andreicheg @ 06/10/2015, 10:57 PM

Another thing is when I check for updates - they say it doesn't exist.
And under "Check for Updates" does not write the date of the test, but writes that it has not been verified before.

Under "Check for updates": Not yet updated. That is, the firmware was not updated over the air, possibly because you updated the instructions from the header. Either the tablet "from the factory" came with this firmware.

[Andreicheg]

JekaSs1986 @ 06.11.2015, 11:28

That is, the firmware was not updated over the air, possibly because you updated the instructions from the header. Either the tablet "from the factory" came with this firmware.

It just says “Last time it was checked then on smartphones” ... and then it’s as if it doesn’t come out to check.

[Fiharo]

After the firmware on 5.0.2, WiFi disappeared. Not a single network does not see. what could be the problem?

[nokrul]

5.0.2 was a normal flight. I noticed that the battery began to eat faster, everyone has it?

[pig fluffy]

Yes, the battery charger definitely increased. at 10-15 percent. plus curve root - du battery saver cannot limit the frequency of the device when the screen is off.

[FlashBackkeR]

Lg promise to roll out android 6.0 on our tablet! Hurray comrades!

[Devillus]

Ivannn11111 @ 09/10/2015, 21:29

http: // android60marshm ... 00-marshmallow-review /Is it possible to already flash?

Do not climb there and do not swing. fake site. like files. You never know how they will affect the tablet.

The site is created, as well as the firmware is flooded on the same day. 6.0 for all tablets. Comments are the same everywhere. links too.
The site is compiled on WordPress, because the admin has broken a little) everything is bad inside.

[Vitalyon79]

[email protected], 18:37

5.0.2 was a normal flight. I noticed that the battery began to eat faster, everyone has it?

Almost the same problem, only I can see WI-FI, I do not have my own router ((

[Vitalyon79]

regretted being "updated." 3 times I reflashed - no wi-fi. I tried to roll back - went to reboot endless!

[iHater]

Hello! I tried to reflash the tablet on Lolipop but got stuck on the fact that it does not respond to the computer (Item 4 in the instructions for the header). I reflash because of overheating. The tablet reboots even when viewing YouTube ((
The tablet is clean, reset to the factory settings. Again, I could not go into the stock recovery again according to the instructions from the caps. The driver from the caps installed on the computer. Previously, the tablet was flashed, but not by me.
Tell me how to be? (Is it possible to reflash in another way?