Assistant
REPLY |
ASUS RT-N16 - Discussion | [wifirouter] |
Message#1 08.03.15, 00:10 | |
Novice [offline] Group: Active users Messages 30 Check in: 16.12.12 Samsung Galaxy S8 Plus Exynos Reputation: 1 | Asus RT-N16 - Discussion
A photo: Description: Specifications: There is no curator in the subject. For filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links. Post has been editedstp101 - 05.04.18, 00:42 |
Message#22 03.12.16, 22:14 | |
Visitor [offline] Group: Active users Messages 29 Check in: 19.01.08 Fujitsu-Siemens Loox N560 Reputation: 0 | Good evening. I use asus download master utility 2.2.2.8. After launch, it enters and begins to continuously fly error list index out of bounds. What can be wrong? |
Message#23 15.01.17, 22:51 | |
Novice [offline] Group: Active users Messages 34 Check in: 02.06.15 Samsung Galaxy S3 GT-I9300 Reputation: 0 | Good evening. Please tell me such a problem I live in a private internet house, I don’t have a wired one to buy equipment (a square plate for a modem), so the e3370 modem went to it. After closing the page and opening it works, but it infuriates, advise what to do, what to do in what to reflash only for details. Please modem megaphone and sim in it mts -------------------- All ingenious is simple [center] |
Message#24 16.01.17, 14:27 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 7067 Check in: 02.08.12 Lenovo C2 Reputation: 439 | |
Message#25 16.01.17, 15:35 | |
Novice [offline] Group: Active users Messages 34 Check in: 02.06.15 Samsung Galaxy S3 GT-I9300 Reputation: 0 | |
Message#26 16.01.17, 15:50 | |
Novice [offline] Group: Active users Messages 34 Check in: 02.06.15 Samsung Galaxy S3 GT-I9300 Reputation: 0 | Rssl-67dbm Rsrp-77dbm Sinr 17db -------------------- All ingenious is simple [center] |
Message#27 16.01.17, 16:33 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 5894 Check in: 10.04.08 Micromax Canvas Pace 4G Q415 Reputation: 731 | |
Message#28 16.01.17, 16:56 | |
Novice [offline] Group: Active users Messages 34 Check in: 02.06.15 Samsung Galaxy S3 GT-I9300 Reputation: 0 | |
Message#29 16.01.17, 18:31 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 5894 Check in: 10.04.08 Micromax Canvas Pace 4G Q415 Reputation: 731 | Marisha6660, plug the modem into the computer. And check the firmware version. If 22 begins, then highlink, if 21 - stick. Well, or the easiest option, if you plug yourself into a computer when plugging into a computer, then highlink. In this case, in the asus route, stupidly on the usb tab, select the android phone and it will work. Post has been editedazzazza - 16.01.17, 18:46 |
Message#30 16.01.17, 21:35 | |
Novice [offline] Group: Active users Messages 34 Check in: 02.06.15 Samsung Galaxy S3 GT-I9300 Reputation: 0 | |
Message#31 16.01.17, 21:37 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 5894 Check in: 10.04.08 Micromax Canvas Pace 4G Q415 Reputation: 731 | |
Message#32 07.02.17, 23:39 | |
Old resident [offline] Group: Banned Messages 1202 Check in: 19.05.16 Xiaomi Redmi Note 4 3/64 Reputation: 119 | Good day. According to this description, the old man added 5GHz band. The method works, everything turned out. The most difficult thing is to unsolder the mini pci-e barely had enough patience, I thought I would quit without finishing Yes, this is of course not AC but only N, but on 5GHz the air is not compared purer Good luck I can not follow your link, it gives an error. Tell me what card they put and what firmware they sewed, if possible in more detail) The router is not bad, long-range, I have been using it for a long time. But recently I noticed that on some devices it cuts the speed over wifi. I tried the firmware, it did not help. The repeater also cuts the speed on wifi, on the lan is normal, but on wi-fi from 6 to 40 Mbps the speed floats. On average, the speed on one device is 12–20 mbit, on the other 30–35 mbit. I used different antennas, almost no changes. There is another router but there is no multicaste in it, but it is very necessary and I would like a hard disk in one 2.4 / 5ghz. The bridge this router works buggy if it is second, the network is there and the Internet disappears when walking around the apartment. If it is the first, respectively, the speed drops by wifi. I would like to somehow torture him to work better) Post has been editedMultisoft1978 - 07.02.17, 23:41 Reason for editing: ochepyatki :) -------------------- I do not cooperate with shops and sellers. |
Message#33 08.02.17, 18:56 | |
I do not know much, but I study ... [offline] Group: Friendssavagemessiahzine.com Messages 1635 Check in: 16.06.12 Oneplus 5T 8/128 Reputation: 250 | Multisoft1978 Did the article (link in a text file packedlink.rar(124 bytes) ) - does not allow the forum to insert this link. Where and which card to take and links to the firmware - the same place. -------------------- OOS BETA 28 + FrancoKernel r44 + TWRP-blu_spark_v9.100 + Magisk 19.0 Huami Amazfit Watch (PACEficator Project 2.6.5.0) Meizu EP52. USB-C to 3.5mm (dc-m321) + RevoNext RN-QT2 |
Message#34 16.02.17, 23:57 | |
Visitor [offline] Group: Users Messages 12 Check in: 13.06.12 Samsung Galaxy Note 2 GT-N7100 Reputation: 0 | zloeteam When you turn on the router, all the LEDs light up briefly and go out. It does not enter into recovery modes. When connected to any LAN port, the corresponding LED lights up and flashes as during packet transmission, but does not distribute IP. When you configure the network card to the address 192.168.1.X, there is also no connection, and there is no ping to the address 192.168.1.1 either. "Reset 30/30/30" It is necessary to turn off the router, then press the black “Reset” button with a pen or other thin object and hold it. (If the power of the router was turned off - turn it on before pressing the button.) After 30 seconds, turn off the power without releasing the Reset button. After another 30 seconds, turn on the power, again without releasing the Reset. Wait another 30 seconds and release the reset. Helped with two such devices ... Taken fromNotes * NIX Admina link to the blog would be nice to fix in the header ... Post has been editedWildhunt - 16.02.17, 23:57 |
Message#35 21.02.17, 12:09 | |
a guest [offline] Group: Users Messages 1 Check in: 15.03.10 Reputation: 0 | "Reset 30/30/30" It is necessary to turn off the router, then press the black “Reset” button with a pen or other thin object and hold it. (If the power of the router was turned off - turn it on before pressing the button.) After 30 seconds, turn off the power without releasing the Reset button. After another 30 seconds, turn on the power, again without releasing the Reset. Wait another 30 seconds and release the reset. Thank you very much! Other methods did not help, only the 30/30/30 method helped! |
Message#36 04.03.17, 03:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 326 Check in: 31.01.08 Samsung Galaxy A3 (2017) SM-A320F / DS Reputation: 63 | When you turn on the router, all the LEDs light up briefly and go out. It does not enter into recovery modes. When connected to any LAN port, the corresponding LED lights up. So the loader dies. Now I am restoring the CFE bootloader using tjtag 3.0.2-RC2-1 and a self-made wiggler adapter without a buffer. Adapter circuit Run from under Windows 7 x32. LPT in EPP mode, address 378h. cfe.bin put in the folder with * .exe Command to write tjtag302RC2-1.exe -flash: cfe / cable: wiggler / fc: 91 / byte_mode / nodma UPD. 3.5 hours stitching. At the end, I counted the firmware, and in each first byte of four-byte cells - the value 0x66 .. Although before the start of the main firmware I flashed 11% and read them - everything was byte per byte UPD. Using the same adapter, you can connect using the OpenOCD program. openocd.exe -f interface / parport.cfg -f board / asus-rt-n16.cfg -c "adapter_khz 500" And then connect with a telnet on port 4444: 1. Initialize debugging interface reset; halt; reset init 2. Backup CFE residues flash read_bank 0 cfe_read.bin 0 0x40000 3. We erase the flash drive under the bootloader and sew the bootloader from the cfe.bin file next to openocd.exe flash erase_sector 0 0 1 flash write_bank 0 cfe.bin 0 or flash write_image erase cfe.bin 0xbc000000 The firmware took only 13 minutes and revived the bootloader. Just in case, I erased the nvram section (I don’t remember the command already) After the restart, the Power indicator on the router began to flash, indicating that it was ready to accept a new firmware ... Happy End! P.S. In CFE, replace all values of the MAC address 00: 26: 18: 85: 25: C9 with your own if you wish to leave the stock MAC. Attached files RT-N16cfe.rar(88.15 KB) tjtag-3.0.2-RC2.zip(93.99 KB) Post has been editedwosk - 22.03.17, 20:41 -------------------- HP iPAQ514->LG GT540->SGS4mini->Yotaphone 2 YD206->Samsung A3 2017 |
Message#37 12.03.17, 20:24 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 138 Check in: 09.09.14 Leagoo M8 Reputation: 6 | Good time ! I bought this router on Avito, I have no idea at all what and how. I managed to create a network myself, but I don’t know how to connect the Beeline 3G modem correctly. I looked on the Internet, there are 2 different versions. Please tell me: insert the modem, and then enter something Beeline in the appropriate lines (found where). Or you can without a modem? And what should be prescribed: I even saw that I needed a contract number and something else. Prompt correctly, if not difficult, where and what to prescribe. Is it possible without a contract number or will you have to look for it? -------------------- It is hopeless, this is when the earth falls on the lid of the coffin ... The rest can still be corrected. |
Message#38 12.03.17, 20:34 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 7067 Check in: 02.08.12 Lenovo C2 Reputation: 439 | Anatolyi Anatolievich,dial-up number (usually * 99 #) and APN, such as beeline.internet.ru. In the settings, according to the idea, everything should already be. Post has been editedyuran72 - 12.03.17, 20:35 -------------------- ASUS RT-N18U |
Message#39 13.03.17, 08:55 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 138 Check in: 09.09.14 Leagoo M8 Reputation: 6 | yuran72, thanks for the answer ! Yesterday again after the message here I shovel an Internet. And everywhere, except for 2 sites, the screenshots show the following data: in one line the number of its Agreement, in the other line the password from the entrance to the Beeline Personal Account must be entered. With Beeline, friendship is only through a modem with a SIM card. I tried on 8-800 with different numbers, but it is useless to call back from Tele2! -------------------- It is hopeless, this is when the earth falls on the lid of the coffin ... The rest can still be corrected. |
Message#40 13.03.17, 09:10 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 7067 Check in: 02.08.12 Lenovo C2 Reputation: 439 | Anatolyi Anatolievich,and you can link to these sites. I once had a modem, but for the first time I heard that the contract number and password from the LC. Modem model? Modern modems have a web interface. Maybe there need to enter this info, and not in the router? Post has been editedyuran72 - 13.03.17, 09:25 -------------------- ASUS RT-N18U |
Message#41 13.03.17, 20:58 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 138 Check in: 09.09.14 Leagoo M8 Reputation: 6 | yuran72ЗI called Beeline today, and there they talk like a fool: they have no idea about any routers! Link to the site where they are asked to enter data here. And today, the friend who dropped this link says, too, that you do not need to enter anything from your data, but what you need, you should drop it. Question: do I need to register when the modem is on? Modem e3533 huavei. OS on a dozen computers. Post has been editedAnatolyi anatolievich - 13.03.17, 21:01 -------------------- It is hopeless, this is when the earth falls on the lid of the coffin ... The rest can still be corrected. |
mobile version | Now: 04/30/19, 04:51 |