Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
MegaFon Login + - Firmware |
Message#1 28.02.15, 14:14 | |
Destabilizer [offline] Group: Honorary Gameday Messages 10061 Check in: 31.03.11 Xiaomi Redmi 4X 3/32 Reputation: 2948 | MegaFon Login + - Firmware MFLoginPh Description | Discussion � | Firmware � | CyanogenMod 12.1 � | MegaFon Login + - MIUI Firmware � | Owners Club � | Power consumption (autonomy) � | Accessories � Important information! If you are flashing the full firmware or formatting the device andthe flashlight insists that everything is completed successfully, but the data on the body remains the same and no changes occurif during operation you havemore and more error messages in system processesif in recoveryyou see "E: can't mount"in all folders, practice shows that in the overwhelming majority of cases this means that the device’s flash memory has switched to READ ONLY (read only) mode.This is solved only by soldering the memory chip to the SC or buying a new device.. For a more detailed check for this symptom you need to do through the SP Flash Toolfull memory testwith all the checkmarks. If the test results in errors related to your type of memory or the test attempt itself gives an error, then the forecast is disappointing and you need to go either to the SC or to the store for a new device. If all the tests are passed successfully without errors, there is still a chance for recovery at home, but do not forget that lately in some cases it happens that the test is supposedly successful, but, in fact, it is still not possible to do anything yourself. So here, how lucky ... �������� � ������� downloadADB drivers for Windows XP / Vista / 7/8 (x86-x64) usb_driver.rar(8.26 MB) AdbDriverInstaller.exe(9 MB) Android ADB driver x64.rar(6.71 KB) MT65xx + preloader + driver.rar(4.66 MB) MTK_Android_USB_Driver.rar(8.26 MB) mtk_xp_vista_7_8_x32_x64.zip(649.96 KB) - The AdbDriverInstaller driver package is not installed on the PC (Win 7 x64). The above installation package contains drivers for 64 bit systems. Try rebooting by pressingF8, choose "Disable mandatory driver signature verification". And then try to install the Qualcomm driver again. This OS boot mode will install any drivers, but after restarting the computer, the signature verification will turn on again, but the installed drivers will work. - How to disable driver signature on Win 8.1maratan - Video instruction "How to install the driver for the firmware in Windows 7 and Windows 8, 8.1?" An application for flashing Android devices on the MTK platform: SP Flash Tool The winXP-win7 application for creating a scatter file and backup: MTK Droid Tools A program to view a list of all USB devices and uninstall them: USBDeview Program for obtaining administrator rights (ROOT-rights): Kingo Android Root Program to check for ROOT access: Root checker Programs for managing ROOT rights: Superuser SuperSU Differences between SuperSU and Superuser The program for various operations with the system (including firmware recovery in the presence of ROOT rights): Mobileuncle MTK Tools The program for troubleshooting recording to an external SD card in Android 4.4 KitKat: NextApp SDFix The program for mounting directories from the internal memory to an external SD card: Foldermount Program for selectively transferring installed applications to an external SD card: Link2SD A program for quickly porting firmware from other devices. MTK FirmwareAdapter Tool Firmware Phablet recovery (official firmware) Repair IMEI Instructions for restoring and flashing phablet Restore the smartphone from the "brick" state (if it is caused by a software failure or unsuccessful firmware)from MTPhantom Recovery Guide with Backup and FlashTool Creating FULL BACKUP MegaFon Login +avava Instructions what to do if the flash unit does not sew the devicefrom MTPhantom FlashTool firmware manualby chikit0 There will be no official firmware with two sims. Firmware for installation via FlashTool Firmware to install from recovery (TWRP, CWM) Useful backup preloaderfrom decker Scatter that seesEVERYTHINGsections- sew full dump on it Memory swapping for SD (for official firmware) OTA-update official firmware Upgrade from V025 to V028 Firmware Update V025 Firmware Update V024from decker Update V023_20150310avavaUpgrade instructions for V23avava Update V022 ->V023 and V018 ->V023from decker Update V023_20141222from decker Unofficial firmware Root and Recovery Recovery How to install recovery without a PC How to install recovery without a PCfromgetto05 Archives with recovery for installation from TWRP Stock recovery TWRP materialized 3.1.1.0 TWRP 3.0.2 Actual versions of TWRP fromgetto05 TWRP Recovery v.2.8.6.0by chikit0 TWRP Recovery v.2.8.1.2 (2.8.1.0)by chikit0 Phiz recoveryfrom decker Login_Plus_CWM_recovery.imgfrom decker Philz Touch Recovery v. 6.59.0.- recovery from damex Installing CWM recovery (using the SP Flash Tool)by shuric164 Unlock Gapps and Cores miscellanea FAQ For romodels Useful for romodels how to port firmware MTK FirmwareAdapter ToolA program for quickly porting firmware from other devices. Useful Tviki to improve 2G / 3G networks and speed of wireless networks Building and installing any firmware from the SP Flash Tool header PureAudio ™ Engine | Studio Quality Disable automatic SMS to MMS conversion. Rollback Microphone Fix for CyanogenMod12.1 beta4.2-4.4 Stock_v028_modem + radio module How to restore 3G on CyanogenMod firmware Titanium Backup Performance Solution Bugs "An error occurred in the application com.android.phone" when requesting USSD MIUI 5.6.25 Highscreenmod 8mp camera interpolation Fix bluetooth Fix battery curve when charging off Patch sound (for all firmware) Patches from Getto05 Kernel sources Solving the audio amplifier noise problem Radio without headphones. Lenovo S650 Modem The solution to the problem of time zones Apk'shki with AOSP icons for Kingsing firmwareby chikit0 System folder stock v022by chikit0 bootanimation and shutanimationfrom decker Installing and creating your own BootAnimationby shuric164 Increase the volume of conversational dynamicsby dumanst Enable and disable nav. panels on the stock firmwareby chikit0 We get rid of constantly active wi-fi in battery statistics. Return stock logoSolution 1from Decker,Solution 2from maloy8080,Solution 3by chikit0 There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedvaalf - 24.04.18, 13:23 Reason for editing: Editing caps |
Message#3 03.02.15, 14:55 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | [email protected], 15:31 It remains only to get the root and you can adjust to your needs. Everything can now be done. 2All:Be sure, before getting root, make a backup in CWM and save it in a safe place. Because then when it comes time to be updated over the air, again there will be a lot of questions, like in the topic with Login 3, and why it is not updated for me, etc. By itself, root does not spoil anything, i.e. update over the air with the installed root will pass with a bang. But. If you deleted the system applications after getting root, replaced the system files, put all kinds of things like "Lakipatcher", etc. programs - then you are guaranteed to change the system files. And since updates are cumulative (incremental), then when you try to update modified files, the signature will not pass the verification and the phablet cannot be updated. So thatBackup first, then root!Do not neglect the creation of Backup'a working system. -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#4 03.02.15, 15:34 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | [email protected], 16:33 It is clear, then you have to slightly postpone. How much backup will approximately weigh? In the pictures you have a 4GB card, I looked. ~ 2 Gb, I got 2.01 Gb, but it is practically out of the box, i.e. without installed applications, etc. M Test Post has been editedtredem1 - 19.03.16, 14:28 -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#5 06.02.15, 11:57 | |
Plastun [offline] Group: Friendssavagemessiahzine.com Messages 490 Check in: 20.12.13 MegaFon Login + Reputation: 212 | Update V023_20141222
Displays a warning: "Your system is damaged, wireless update is not available." System full stock. No, and there were no modifications (including "decorators") P.S. I tried to update and through the mobile network (WiFi turned off). After copying the update archive to the root of the card I try to select in the menu “wireless update” ->"From the CD-card", but the result is negative. I try to upgrade from under Recovery - negatively. I try unpacking the archive with the update to flash the internal archive - negatively. Post has been editedavava - 12.03.15, 07:54 -------------------- Thank God for everything! |
Message#6 12.02.15, 13:16 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Firmware updates Only my update check script on FOTA showed updates to go to V023. I post it here.
p.s.For those who have already requested CWM to apply the official update, it will be necessary to temporarily return the stock recovery, since update affects him. Or, use the update to install via CWM. p.s. If the post seemed useful - you can put it in the header, but not fix it with a curator tag. Because if there is an update for V022 - first I will post it here. If we already collect updates, then in one place. So it will be more convenient for users to navigate. Post has been editedvredniiy - 04.04.15, 09:17 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#7 12.02.15, 22:31 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Backup V023 for deployment via CWM For those who for some reason do not have the opportunity to installV023- I post the full backup V023 for deployment via CWM: 2015-02-12.19.46.05.7z To install it, simply unzip the folder 2015-02-12.19.46.05 to the SD card/ clockworkmod / backup /(if you copy files on a working device, then the folder should be placed in/ storage / sdcard1 / clockworkmod / backup /) then boot into CWM and select restore. In the backup, nothing is changed - all system files are regular, nothing is deleted, the only thing is that root is integrated and SuperSU is installed. p.s.Please note that if you do not need root or CWM, but only V023, then it is easier to wait for your device to update itself via FOTA. Although nothing is changed in the system files of the firmware, with the next update after V023, the next update recovery is possible, and in this case, in order to update via FOTA, you will need to somehow save the recovery from the V023 phone to your phone. The manufacturer knowingly organized the FOTA update server - each update is incremental and assumes that you have installed the original files from the previous version. That is why updates are made consistently. If you modify something, be it recovery or removal of system applications, etc. - Be prepared for the fact that FOTA will not work for you. Post has been editedvredniiy - 04.04.15, 09:17 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#8 18.02.15, 14:18 | |
Plastun [offline] Group: Friendssavagemessiahzine.com Messages 490 Check in: 20.12.13 MegaFon Login + Reputation: 212 | Step-by-step instructions for creating MegaFon Login + FULL BACKUPMurzilka :) Remember, everything you do - do at your own peril and risk! Therefore, act thoughtfully and carefully! It is possible to make a full backup of ROM (FULL BACKUP without user data) of MegaFon Login + (and restore in case of a system crash, or the need to return the device status as "from the store") using programsSP Flash ToolandMtkDroidTools. I strongly recommend that you make a full backup before updating, flashing, rutting or doing something dangerous with the device. Pre-charge your phablet completely, and use USB 2.0 for connecting on the back panel of the system unit! 1. Install the driver from the topic “header” (if the ADB drivers are already installed on the PC - you can skip this item and restart the computer. 2. Turn on the mode "USB debugging"(go to menu"Settings" -> "For developers". In the upper right corner, slide to enable the slider and click"OK"in the message that appears. Put a tick in the line"USB debugging"). If you have no item "For developers"then go to"Settings" -> "About phone" ->press several times (6-7) on the line "Assembly number Vхххххххххх"until a popup message appears"You became a developer". On the menu "Settings"a new item will appear"For developers". 3. Connect the included phablet to the computer. 4. RunMtkDroidTools [ attachment = 5841192: 2015.02 .... 37s_006_.jpg] Attention! There is a problem - MtkDroidTools does not connect to all phablets. Solution fromrdasfsadfuz running MTKDroidTools - thenKingo Android Root--- wait for MTKDroidTools to find the phone - close Kingo Android Root--further instructions 5. Click "Block map" A window will appear with the map. In this window, click "Create scatter file" and save the file (the name is better not to change). 6. RunSP_Flash_Tool 7. Open saved scatter 8. Blocks with addresses will appear in the list. Click the tabRead back 9. Add a block (buttonAdd) 10. Double-click to open the added block, specifying the name of the file to be saved (starting withROM_) 11. Then, in the window that appears, enter the second block in the address of the cache block from the scatter file (you can open it in notepad) and pressOK 12. Disconnect the phablet from the PC and turn it off. Remove and reinsert the battery. 13. In the programSP_Flash_Toolpress the buttonRead back 14. Connect your phone to PC. The program must run first red, then blue progress bars.(if you didn’t run, try disconnecting the phablet, distort the battery, and connect it to the PC again. If it didn’t help, it means problems with the drivers or try connecting the device without the battery and repeat this step). 15. The process takes about 20 minutes. After the process is completed, a green circle appears.Now you can disconnect the phone from the computer and turn it on.SP_Flash_Toolcan now close. 16. Open MtkDroidToolsand connect the included phablet. Make sure thatMtkDroidToolssees him. 17. Click the tabroot, backup, recovery 18. Click "Create a backup from ROM_ flash" and select a previously saved file from the programSP_Flash_Tool. 19. The program will offer to automatically create a CWM, patch the boot - this is at your discretion (but if you want a clean backup, which is recommended, then we refuse to patch) 20. Backup appears in the folderMtkDroidTools \ backups \ ... 21. Now you need to save the created backup, they can always return the phone to its original state. It is recommended in addition to the folder with a bunch of files fromMtkDroidToolssave alsoROM_reinsurance file. Important information on this manual. 1) Refusing to automatically create a CWM in the backup folder it will have a namefactory_NONmodified_recovery.imgand, accordingly, when loading a scatter file to the USB flash drive, it will not be picked up automatically and displayed automatically, therefore for convenience it is recommended to rename it immediatelyrecovery.img 2) Since we cut our backup by cache block, then when you load the file scatter into the USB flash drive, you will not see the CACHE and USRDATA blocks (this is done so that you do not accidentally transfer your personal data along with the backup to the person who will bail out your backup). But there is a caveat, if the device is restored by backup without these blocks, then it may not boot further into the boot screen, in order for the download to complete successfully, go to the recovery menu and do a wipe factory reset. Original threads "SP Flash Tool - MTK-based flash driver". Post has been editedavava - 11.03.15, 11:55 -------------------- Thank God for everything! |
Message#9 18.02.15, 22:50 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | As I have promised -backup V018 for firmware via SP Flash Tool. The kit includes scatter, system, recovery and boot. mfloginph_v018_system.7z The SP Flash Tool itself is not included in the archive, it can be taken from the post with CWM in the header. p.s.All actions with the SP Flash Tool you carry out at your own peril and risk. No one except you is responsible for damaged / inoperable / failed equipment as a result of your inept / erroneous actions and any other direct and indirect causes and factors. Those. in other words, you doubt your own strength, do not flash anything into the device. Post has been editedavava - 19.02.15, 08:46 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#10 25.02.15, 08:32 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1294 Check in: 29.08.11 Xiaomi Redmi 4A Reputation: 53 | [email protected], 07:39 This is a variant (kingroot) of getting a root without a BB, and all without the use of flashtool Already explain to people that there are already three types of this root. Full, shell and temporary. Kingroot is most likely a shell, i.e. without access to the system folder. Root is not complete. Do not agree, prove the opposite. Screenshots in the studio. ! Test Post has been editedtredem1 - 19.03.16, 14:29 Reason for editing: Adding a quote |
Message#11 25.02.15, 10:05 | |
Plastun [offline] Group: Friendssavagemessiahzine.com Messages 490 Check in: 20.12.13 MegaFon Login + Reputation: 212 | [email protected], 07:39 This is an option (kingroot) to get a root without a BB, and all without the use of flashtool ... if avava does not remove ... Forcedto repeat: Rootobtained byKingroot, VRoot, Framaroot, Stump RootorTowelroot- defective.Busyboxnot installed,Titanium backupwarns of possible errorsSuperSUupdate the binary file itself can notRootdisappears when the program is deleted. The topic header contains a link to the program to check for ROOT access.Root checker. Submit proof - screens with the results of the verification of this program, and at the same time the screen withBusyboxandSuperSU. If your data is confirmed, the result will certainly be in the "header" of the topic. If not ... delete. Post has been editedavava - 25.02.15, 22:04 -------------------- Thank God for everything! |
Message#12 25.02.15, 10:21 | |
a guest [offline] Group: Users Messages 2 Check in: 01.02.12 Apple iPhone X Reputation: 2 | Can someone come in handy: In the smart service is already preinstalled, allowing you to get root-rights. It is enough, for example, to use any application to create shortcuts (QuickShortcutMaker and analogues). Create a shortcut for User2Root (com.mediatek.engineermode / com.mediatek.engineermode.user2root.User2rootActivity). Click on the created shortcut, select 'root' - turns on root access only through the terminal, then write / delete / change what we want. Post has been editedavava - 25.02.15, 11:03 Reason for editing: In the header: tablet_za: |
Message#13 25.02.15, 11:02 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | [email protected], 11:21 In the smart service is already preinstalled, allowing you to get root-rights. +1 But for this there is quite a regular way, without Quick Shortcut Maker;) Q.How to get access to User2Root - test mode MTK allowing you to get root-shell? A1.In the built-in dialer dial*#*#20140816#*#*then select root from the menu that appears. After that, the terminal and adb will work on behalf of the superuser. A2.In the smart service is already preinstalled, allowing you to get root-rights. It is enough, for example, to use any application to create shortcuts (QuickShortcutMaker and analogues). Create a shortcut for User2Root (com.mediatek.engineermode / com.mediatek.engineermode.user2root.User2rootActivity). Click on the created shortcut, select 'root' - turns on root access only through the terminal, then write / delete / change what we want. Q.How to get quick access to the engineering menu? A.In the built-in dialer dial*#9#. p.s. I ask the curator to add to the cap. Post has been editedvredniiy - 04.04.15, 09:18 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#14 28.02.15, 14:30 | |
I made [offline] Group: Banned Messages 1437 Check in: 11.10.14 Reputation: 306 | TWRP Recovery v.2.8.1.2 (2.8.1.0) Backpack all sections! SCREENSHOTS Yes, the screen is not ours, but there are no visual differences other than the TWRP version! INSTALLATION METHODS Lighter. Needfull #ROOT 1. Download and install@Mobileuncle MTK Tools 2. Select Recovery Update and specify the path to the recovery that lies on the phone The way is heavier but 100% working (FlashTool) We do everything just likehere, only instead of the file of its recovery, we shove this recovery and that's all) FAQ If you find bugs / bugs write in QMS What sections backup backup? / boot / logo / nvram / recovery / uboot / protect_f / protect_s / mbr / ebr1 / pro_info / seccfg / sec_ro / expdb / data / system / cache DOWNLOAD YANDEX DISK or Download from the forum -recovery_TWRP_all_stable25kernel.img(8.23 MB) I do not recommend ticking enable compression, it may crookedly dribble the data section BAGI, FEATURES 2. You can not mount the memory of the phone and save on her buck (associated with a small amount of it) For those who needrootafter installing twrp (for all firmware 1. We throw on the memory card of the phone this archive.BETA-SuperSU-v2.48.zip(3.83 MB) 2. Turn off the phone and go into the recovery. 3. In the recovery, choose Install>Choose our archive>Swipe to install 4. Once we have loaded into the system, go to the Play Market and update Super su. 5. After we have updated Super su, we go into the application and if asked to update the binary file, select "Normal" and reboot. 6. Everything, you now have a root! Version is outdated, I recommend this recovery -MegaFon Login + - Firmware (OS 4.4) (Post chikit0 # 40489673) Previous versions Version 1, without all sections (Ya.Disk) Download from the forum We speakthank "uzerlinux"for help in porting! Post has been editedchikit0 - 30.05.15, 12:14 Reason for editing: In the header: tablet_za: |
Message#15 28.02.15, 16:14 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1294 Check in: 29.08.11 Xiaomi Redmi 4A Reputation: 53 | here's something else: the time is 1 hour ahead if auto on over the network is enabled |
Message#16 28.02.15, 20:43 | |
Visitor [offline] Group: Active users Messages 15 Check in: 22.06.14 ZTE Blade L2 Reputation: 0 | Guys, what's the trouble, SU is not updated through the market (it writes the wrong signature) and the binary is not updated on the installed one, respectively. Put Kitkat-SuperSU-v2.00 + .zip |
Message#17 28.02.15, 21:05 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Guys, what's the trouble, SU is not updated through the market (it writes the wrong signature) and the binary is not updated on the installed one, respectively. Put Kitkat-SuperSU-v2.00 + .zip Roll back to the Backup that you made in CWM and flash Kitkat-SuperSU-v2.00 + .zip from the CWM post and root from the header, you don’t need to do anything else. Those. You do not need to install and update anything through the Market. Post has been editedDecker - 28.02.15, 21:06 -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#18 28.02.15, 22:13 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1294 Check in: 29.08.11 Xiaomi Redmi 4A Reputation: 53 | muzcentr, And did you make a wipe cache after installation? I did not do it for the first time and I got it The second time I put it with all possible wipes and it seemed to be normal |
Message#19 28.02.15, 22:16 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | The second time I put it with all possible wipes and it seemed to be normal All wipe'snecessarilydobeforeinstallation. After - at will. p.s. Tomorrow I will tell you my battery statistics. So far, more than 6 hours holds. At the same time, it is actively used by everyone who sits in VK, who plays, who calls;) WiFi is on, SIM'ka is worth it. Post has been editedDecker - 28.02.15, 22:17 -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#20 28.02.15, 22:16 | |
I made [offline] Group: Banned Messages 1437 Check in: 11.10.14 Reputation: 306 | FlashTool firmware manual What do we need 1. SP FlashTool 2. The firmware itself - In the header (Recovery>Backup for firmware via flashlight) 3. ADB driver -DownloadthankDecker Firmware and driver setup Instructions if adb drivers are not configured, you can also use this instruction -link 1. Open FlashTool click on the Scatter loading and point to the "text document" in the folder with the firmware, usually called (MT6582_Android_scatter) It should turn out 2. Press the Dowload button, and connectOFFphone. If the red inscription went, and then the yellow one with percentages, do not touch the phone - the firmware is on! (This will happen if you have ADB drivers configured) If you are not configured (and not installed automatically), you remove the cord from the phone and open the device manager. 3. Next, when we connect the phone (we don’t close FlashTool, the download button should be pressed), an undefined device MT65xx PreLoader will appear in the task manager, you need to “catch” by having to right-click and click "Search for drivers on this computer" and specify the path to the driver that was in the archive (unpack it first). 4. After that, a new device should appear in the device manager in the "COM and LTP Ports" section. 5. After the new device appeared, the firmware process should go! AT THIS TIME, THE PHONE DOES NOT TOUCH AND DO NOT INTERRUPT THE FIRMWARE PROCESS. When the process is over you will see such a picture. Notes - If you do not want to take risks when setting up drivers in FlashTool, you can remove daws from everything, leaving only recovery. If everything went well, then you can safely flash the entire firmware. _________________________________________________________________________________ If anyone has already configured ADB driver. 1. Open FlashTool click on the Scatter loading and point to the "text document" in the folder with the firmware, usually called (MT6582_Android_scatter) It should turn out 2. Click Download 3. ConnectOFFThe device and wait for the end of the process. (AT THIS TIME, THE PHONE DOES NOT TOUCH AND DO NOT INTERRUPT THE FIRMWARE PROCESS) 4. When the process is over, you will see such a picture. Post has been editedavava - 28.02.15, 22:18 Reason for editing: In the header: tablet_za: |
Message#21 01.03.15, 16:15 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 60 Check in: 28.08.13 Reputation: 1 | If you get root with Kingo Root, will FolderMount work? |
mobile version | Now: 04/30/19/01:56 |