[X]Assistant

[-baw-]

Prestigio MultiPhone 5503 DUO - Firmware
PAP5503DUO, PSP5517DUO
Description | Discussion пїЅ | Firmware пїЅ

Important information

K

Attention!Recently, there has been an increase in the number of “scorching” of the device due to firmware through PC. If you do not have time to do anything, then don't risk it!

• In no case, with firmware via SP_Flash_Tool, the flash driver for smart phones based on MTK. Do not make the full format of our little animal! 100% get a brick! If your hands itch to make a format, go into recovery and make wipes there.
  
• PAP5503DUOandPSP5517DUOThis is the same phone with different stock firmware
  
• Do not forget to setAuthors firmware / recovery / patches. Thus you stimulate them to new work.

Drivers and Utilities

MTK driver

Firmware

Firmware 4.2 and 4.4

psp5517duo_v.1.0.09
Official firmware 4.2 and 4.4 for 5503 (for flashtool)
Backup firmware 4.4.2 for TWRP(changes in the firmware)
Backup firmware 4.2.2 for TWRP
Android L UI V3
Firmware in the style of LG G3 4.4
Lenovo S650 port
Sony Xperia E4
Lollipop final
Slim fresh 11, (Mirror), patch to fix the volume on firmware SlimFresh, Three patches
SlimFresh_ROM_v11fromVitkos77with integrated patches
ASUS ZENFONE 5fromVitkos77

Firmware CM 12.1

In some CM12.1 firmware, Youtube does not work correctly, to fix it, we use a choice:

Patch for CWM / TWRP
alternative version of Youtube
Og youtube

In CM12.1 firmware, do not set the brightness slider to a minimum, the device may not come out of sleep, only distortion of the battery helps. Usepatch.
CyanogenMOD 12.1 (Build by grigoriyk3)
CM 12.1 StableEdition
DecepticonOS (CM12. 1 based)
CyanogenMod 12.1 (Build by Vitkos77)
Flyme_4.5.4.5R (CM12. 1 based)
Galaxy Note5 ROM (CM 12.1 based)
Temasek Unoffical (CM12.1 based)
Resurrection Remix V2
XperiaMix (CM12. 1 based)
CarbonROM (CM12.1 based)
PAC-ROM (CM12.1) based)
CyanogenMod 12.1
LolliCraft (CM12.1 based)
ResurrectionRemix V2_FINAL (CM12.1 based)
ADPT OS V2_STABLE (CM12.1 based)
Oct OS (CM 12.1 based)
CyanogenMod 12.1 (Build 04/15/16)
CyanogenMOD 12.1 Final v3.1

Firmware CM 13

CyanogenMOD 13
Mokee OS 08-06-17
CM 13 Latest STABLE
CyanogenMOD 13_STABLE
ADPT-OS (CM13) MM-6.0.2
CyanogenMod-13 (Android 6.0.1) Beta
[BETA] SNAPSHOT CyanogenMod 13 | Recall

MIUI firmware

MIUI 8.2.4.0.KHFCNDL
MIUI 8 6.11.24
MIUI 8 6.9.29 (Weekly)
MIUI V7.1.3.0 GLOBAL (STABLE)
MIUI V7.1.2.0 STABLE ROM
MIUIPro and MultiROM (updateable)
MIUI MultiRom 5.12.31 MultiRom 6.1.7.b62 MiuiSU 6.1.7 | patch for MIUI MultiRom 6.1.7
MIUI V7 6.1.7 STABLE (Update 6.1.28)
MIUISu V7 6.1.28
MIUIPro V7 6.1.28 (Weekly)
MIUI V7.2.1.0 GLOBAL (STABLE)
MIUI V7.3.1.0 GLOBAL (STABLE)

LEWA OS firmware

Lewa OS V6

Android 7.x.x

Android Nougat 7.1.2

Other firmware

Asus zenfone 5
Firmwarefromgrigoriyk3
Various firmware (possible repetitions)
official for CWM (check required)
Backup for cwm from 5517

Recovery

TWRP Recovery 2.6.3.0
TWRP 3.0.0fromgrigoriyk3
CWM 6.0.3.0
Super fast way to change Recovery from under Recovery
TVPRP 3.0 RU namedPrestigio_PAP5503DUO
TVPRP 3.0 RU namedPrestigio_PAP5517DUO
TWRP 3.0.2

Instructions

Installing the preloader driver for firmware via SP_Flash_Tool
Installing ROOT (SuperSU) and installing TWRP
Restore radio modem and IMEI
Repair IMEI
Repair IMEI
Nvram and imei recovery
Instructions for installing custom firmware
Video driver installation instructions
Installing firmware on the drain without a PC or when USB is not working
CM12.1 firmware installation guide
Instructions for obtaining Root rights to CyanogenMod 12.1

miscellanea

Modified stock-bootanimation
Remapping memory through CWM / TWRP Recovery
Stock radio modems for Prestigio MultiPhone 5503 DUO
MiXiomi style bootlogo
Gapps downloader
BACKUP NVRAM to restore via MtkDroidTools
PSP 5517DUO KitfromNoklasy(backups for TWRP and CWM, scatter, the recovery itself, stock applets and recovery, a set for root)

K

Attention!In recent years, increased incidence of "scorching" apparatus. If you do not have time to do anything, then do not take a risk - do not flash the phone with stock firmware via flashlight !!!

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddestroyer71 - 29.03.19, 16:52

Reason for editing: psp5517duo_v.1.0.09

[-baw-]

Drivers, stock recovery and pre-installed files on 4.2.2

Attached files

drivers.zip(7.38 KB)
framework.zip(21.23 MB)
fstab.zip(377 bytes)
app.part1.rar(125 MB)
app.part2.rar(83.31 MB)
recovery.img(4.94 MB)
cpuinfo.zip(1.1 KB)


Post has been edited-baw- - 26.10.14, 10:07

[hanuma50]

TWRP Recovery 2.6.3.0 download

Download recovery_5503.img (5.65 MB)

QMS Questions

Post has been editedhanuma50 - 18.08.14, 18:20

[-baw-]

Installing ROOT (SuperSU) and installing TWRP
1. Download and unpack the archiveRoot.zip(36.7 MB)

2. Copy UPDATE-SuperSU-v2.04.zip to the root of the SD card.
3. Run flash_tool.exe and in the Download in the Scatter-loading line select the file MT6582_Android_scatter.txt in the TWRP directory and then click Download.
4. Turn off the smartphone and after shutdown we connect to the PC and wait until OK appears.
5. Hold down the + Volume and hold it down for a few seconds while pressing the ON key. The smartphone will boot into TWRP.
6. Select Install and find the file UPDATE-SuperSU-v2.04.zip. Install and reboot.

P.S. The TWRP installation process and errors are also described in detail here.SP_Flash_Tool is the flash driver for MTK smartphones.

P.S. For the version of Android 4.4 we change in the archiveMT6582_Android_scatter.txt(6.82 KB)


Post has been edited-baw- - 24.10.14, 16:51

Reason for editing: Completed

[-baw-]

Official firmware 4.4 for 5503
- 4.4.2;
- Improved navigation;
- improved energy saving;
- subsequent PTA updates are possible;
- the guarantee remains;
- other optimizations and updates.

Firmware

Before flashing, the settings should be as follows:


Installation Procedure:
1. Unpack the archive with the firmware (preferably to the root of drive C: or D :)
2. Turn off the smartphone. The cable is not connected to the computer.
3. Take out the battery. (You can insert, if you do not have time to update the driver - taking out, inserting - taking out akb can be repeated until the result - installing drivers).
4. Download the driver and unpack. We connect the phone to the computer with a cable. The operating system will find a new device - specify the folder with the driver for your OS version. You can try to connect with the Volume + key held down.Check in the task manager that installed.(if not installed read1, 2, 3, 4) p.s. You can experiment with installing drivers to get results.
5. Disconnect the smartphone from the computer.
6. Insert the battery.
7. Run the program Flash_tool.exe.
8. Click on the Scatter-loading button and select the MT6582_Android_scatter.txt file (it is in the folder with the firmware).
9. Click - Download
10. Connect the phone to the computer with a cable. The program should see it and start the firmware. If the phone is not found, then disconnect it from the computers, remove and insert the battery and reconnect to the computer. Or we come back to point 4.
11. After the end of the firmware disconnect the phone from the computer.
12. Done
13. Turn on the smartphone (first boot 4-6 minutes).

Download Files

Drivers in the topic header or herePrestigio MultiPhone 4500 DUO - Discussion (Post # 23795582)
Utility for firmware -SP_Flash_Tool_NO FORMAT_20141107.rar(16.59 MB)
- 100% working, official and does not allow the unintended (erroneous) format by the user.
Link to firmware

Attention!!!
1. All data will be erased and the device will be as if purchased.
2. It is not advisable to flash with a memory card.
3. Even if something does not workdo not do Format in other versions of the utility - get a brick.


Additionally, the installation process and errors are described here. - SP_Flash_Tool is the flash driver for MTK smartphones.

Official comments

Official firmware 4.2 for 5503

Download Files

Link to firmware

Post has been edited-baw- - 09.07.15, 23:37

Reason for editing: Completed

[Psixxxx]

CWM Recovery for 5503
_{(on 5517 it should work, but it was not checked)}

• Mounts an external SD card (Internal memory does not mount)
  
• Does not create problems with the radio module
  
• Stitched over any recovery

Installation

1. Install, if not already installed,Preloader driver
   
2. Download the flash tool for the firmware:SP_Flash_Tool_v5.1420.03.zip(29.88 MB)
   
   
3. Unpack the archive in any folder
   
4. Download the recovery image itself:PAP5503DUO_CWM.img(5.22 MB)
   
   
5. Download the scatter fileMT6582_Android_scatter.txt(6.82 KB)
   
   (or use the scatter file from the firmware)
   
6. Go to the folder with the unpacked SP Flash Tool, openflash_tool.exe
   
7. Do not pay attention to the error, click OK
   
8. We press the buttonDownload Agent, chooseMTK_AllInOne_DA.bin
   
9. In Scatter-loading, select our Scatter file. A list of firmware files should appear.
   
10. In lineRecoveryin the graphLocationspecify the image of our CWM.
    
11. Check that only tickedRecovery, and in the drop-down list above was selected modeDownload:
    
    
12. Push the buttonDownload; The program will wait for the phone to connect.
    
13. We take out the battery from the phone and connect it via USB.
    
14. At the end of the download, a new small window will appear with a notification. Feel free to turn off the phone and enjoy your new recovery.
    

Files separately

CWM itself:
PAP5503DUO_CWM.img(5.22 MB)

Utility for firmware:
SP_Flash_Tool_v5.1420.03.zip(29.88 MB)

Scatter file:
MT6582_Android_scatter.txt(6.82 KB)

The instruction should in theory also be suitable for TWRP.

Post has been editedPsixxxx - 26.10.14, 14:52

[Xoopu]

Yes, I figured it out. Through cwm I flashed stock_rom5503duo, then through the flashlight I filled in the stock recovery (I took the topic in the header). But it seems that on version 4.2 there are no problems with the screen - in 6 hours there is not a single glitch! Threw back 4.4 or miui - immediately appeared. Who can that prompts?

[mix_g]

Yudina_irina88,
Try to make a wipe data smartphone, I mean a hard reset, and then see if this situation repeats, if nothing changes, carry it back to the service center, let it be repaired, or go to the store where it was taken.

[kalakop]

Is there a lightweight kit-kate for our firmware? What used in the running did not hang any Google services and not understandable services, and more free RAM.

[aurquris]

Help! In general, I am trying to install drivers for the firmware, but the computer does not see the phone at all, while charging, the ability to connect only in the off state, because When you turn on ads, Navitel does not turn on any more, I tried another cable, another computer, another OS, it does not see and only charges, I can not understand what I'm doing wrong.

[griding]

enable debugging

[griding]

In Android L, I have such a problem, just install the sim and it’s the com.android.phone error. Help please firmware like to use. I tried to replace the modem files / system / lib / modules and system \ etc \ firmware with the movie did not help.

[grigoriyk3]

In what sense do I “just set a sim”? I don’t understand?

[griding]

I installed the SIM card, the phone booted up and started searching for the network and immediately an error

[grigoriyk3]

If I understand correctly, then when you flash the phone, you get the SIM card. With our sim cards, I had no problems.

[griding]

Just tried the same thing. But the most interesting thing is that I can not dial and write SMS and they can.

[griding]

and maybe porto here escho some the same

Post has been editedgriding - 14.01.15, 01:57

[grigoriyk3]

Give me the link.

[griding]

tryExplay Fresh - Firmware (OS 4.4.x.)

[goshik21]

In Android L, I also have such a problem, knocking out the error com.android.phone! how can cure?

[goshik21]

Yes, the problem is that immediately after installing the firmware (according to the instructions) and launching it, the choice of language and com.android.phone is displayed, I click OK and after 5 seconds again the same thing, etc.!