If you need help with any problem arising with the ViperOne firmware, so that the help is correct, It is necessary to provide maximum information about the system, firmware version, what was, what did, etc. All posts that do not contain the necessary information can be deleted without warning !!!
Before asking a question, read the information in the header or use the search by topic!
Do not forget to backup before any actions with the phone! Everything that you do - you do at your own peril and risk! The authors of the manuals are not responsible for the curves of the hands of the owners!
Express thanksLiftreputation!
Use the buttonIn those posts that need to be added to the header!
Theme ViperOneM8 on XDA
Instructions
How to install the firmware
The firmware can be installed both on S-OFF devices, and on S-ON with an unlocked bootloader and installed custom recovery !!!
Download the firmware and place it in the internal memory
Reboot the device to bootloader mode (hold Power + Volume down)
Log in to Recovery (for ViperOne firmware, the developer recommends usingTWRP Recovery)
Select "Install" and select firmware
Follow the instructions in the installer Aroma
Reboot device
Fixing the "Not enough space" error in ViperOneM8 v4.5.0
Boot into TWRP recovery
Select "Advanced" and then "File Manager"
Go to / sdcard / Android and press "select" in the bottom right corner of the TWRP screen.
Font like bvl in the tincture of the drain and remained in the wiper in the settings
I asked specifically about the application menu, because in other places it is normal, and if you turn on the increased one, then in other places it will also become more
Hello! Viper 4.2.0 firmware strangles all notifications from applications in the status bar (sms, slowdown, power saving ...) already rummaged everything, where to dig?
Viper 4.2.0 firmware strangles all notifications from applications in the status bar (sms, slowdown, power saving ...) already rummaged everything, where to dig?
The people are such a problem, after installing 5.0+ Sometimes the brightness settings are set at a very low level (with automatic mode) and do not rise until the phone is rebooted. And the flash drive fell off already three times, again, the reboot helps.
Brightness settings are set at a very low level (in automatic mode) and do not rise until the phone is rebooted. And the flash drive fell off already three times
It seems you have one with the other. tried to change a flash drive?
Hello. I want to ask me such a problem to cost the last viper I have a mobile router huawey E5776 and when my bluetooth is on, my internet speed drops by 200-300 kb and when it’s off, everything’s fine with a home router Other phones also tried to install the service firmware, it works only on the wiper. Thanks in advance.