[X]Assistant

[Biecpi]

Thl 4000 - Firmware
THL 4000
Description | Discussion пїЅ | Firmware пїЅ

Important information!

ATTENTION! Everything you do with the phone, you do at your own risk!
The authors of manuals and firmware are not responsible for the wrong actions of the owners!
Before installing the firmware, it is strongly recommended to backup the current firmware version in recovery in case of rollback.

Useful information

Why deleted my post?

The answer (s) to your question (s) are on the surface - in the topic header (under tags and / or under spoilers).

Before asking the question (s), you are too lazy to use the search on the topic (in the right upper or lower left corner of each page) and scroll through at least 3-5 last pages.

With your message, you ignored the established communication style of users in the topic.
The most frequently broken recommendations are:
discussion / comparison of other / third-party software
handicraft (including Cyrillic and vice versa) alien nicknames
screenshots not hidden under spoiler
links to third-party resources that are not hidden under the tag or "hidden text" under the spoiler

The information in your message is hopelessly outdated and not relevant for extreme builds / releases

Not only the Curator keeps order in the subject, but also the Moderators help keep the topic clean, for which they thank you so much!

FIRST AID

Dear owners of this devicealways REMEMBER! That in your hands is not just a phone, but a smartphone in which an operating system is installed.The OS always has a lot of “necessary” settings, which, if changed, can change the functionality of the phone, limit it. Also, any installation of the software can cause conflicts in the OS, as a consequence of all of the above, and various kinds of failures can occur, failures in the software and hardware part, or just any function can be disabled, by chance, by the user.

If any strange things started to happen to your phone, or any function of the smartphone, etc., suddenly stopped working. then:
1) The first thing to do is to reboot the device (reboot).
2) If the first item did not give a result, then try to analyze after what actions the “weirdness” started to occur, it is possible to change some settings, install programs, games, try to return the system state to the state “before the problem appears”.
3) If the problem persists, try resetting the cache (wipe cash) through the recovery.
4) If the problem is still present: use the search on the forum "Firmware" or "Discussion" by keyword.
5) The problem is still present then you can reset the settings to factory settings. The probability that your problem will be eliminated is 99.9%. It is advisable to do it through recovery mode item wipe data / factory reset.BUT REMEMBER! When you reset the settings, all user information will be deleted: contacts, messages, installed applications, various settings, the phone will return to the state from the box. If the device was made root and deleted the "stock" programs, the reset will not return all the deleted applications, the superuser's rights will remain
6) If after all of the above and done you still have a problem, then feel free to contact the forum!
.

Respect your and other people's time, try to be specific and describe in detail the problem and data about the system. Specify:

1)пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ, пїЅ пїЅ.пїЅ.
2)пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ
3)пїЅпїЅпїЅпїЅпїЅпїЅпїЅ/пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ Root
4)пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ (пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ-пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ c пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ)
5)пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ, пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

Memo for users

The firmware is laid out as is and claims are not accepted!This applies to any firmware.Read the main forum rule -"here no one should NOT give anything to anyone!"
You can contact the author of the firmware through a forum or a QMS message and inRespectful formreport a problem. Any sayingsAMENDABLEcharacters willignored or moderated, and sheer disrespect and rudeness are severely punished!

Drivers and Utilities

MTK(USB, Vcom-port)Android_MTK_Drivers_.zip(18.08 MB)
SPFTfor firmware-Flashtool.zip(58.86 MB)

Official firmware

Off firmware from2015.06.10for FTool -MEGA
Off firmware from2015.03.19for FTool -Mail.ru (Yandex.disk)
Off firmware from2014.11.28for FTool -Mail.ru (Yandex.disk)
Stock Recovery -recovery.img(5.79 MB)

Unofficial firmware

Android 4.4

Lewa os v5/v6
VibeUI 1.5 / 2.0 / Updated 2.0
Stok_lite
EMUI v3
Stockmod
DEXP port
THL ENERGY
Sony xperia
CM11Beta
LAUDE S800
Lollipop White/Dark
LG G3
HTC ROM
IOS UI
Muiu v5/v6/v7/v8
Freeme
Samsung S5
Jiayu os
Cubot S200
Color OS
MIX_MOD + addition
AOSP

Android 5.0 / 5.1

CyanogenMod 12 / 12.1

Cyanogen Mod 12.1 R37
CM 12.1

BETAAOSP 5.0.2 (3.10.54)

Android 6.0.1

CyanogenMod 13 / 13.1

Ressurection remix 5.7.1

Android 7.1.1

Lineage OS 14.1

Instructions

All actions you perform at your own risk! Administration of the forum, as well as its users are not responsible for the possible damage to your phone!

Getting root access, as well as custom recovery
The program for firmware Recovery and Boot without a PC
Memory re-layout method
Get Root right quicklyPC or without pc
SuperSU for CWM

Instructions for firmware via TWRP RECOVERY

We put the necessary firmware in the zip-archive on the SD-card.

Download the phone to TWRP recovery (turn off the phone - the screen goes off - when you turn off completely - give a vibration signal, turn on - press and hold the Power and then Volume + and hold both buttons until the blue wallpaper with the word TWRP)

Save the current firmware - the "Backup" item - select ALL partitions (Boot, Cache, Data, Recovery, Android Secure, System, Nvram, Uboot), to save space - Enable compression. To speed up backup - Skip MD5 generation during backup. Tap on the Storage strip - select the sdcard if not previously selected. Via Set Backup Name, you can specify a name for the backup. Swipe to the right along the "Swipe to Back Up" strip to start the process - the "Backing Up System" window appears. When saving is finished - click the arrow back 2 times to exit to the main menu.

We do Wipe-s (data cleansing before rolling in new firmware). Through the menu "Wipe ->Advanced Wipe "select items: Dalvik Cache, Cache, Data, emmc (*), Android Secure, System.
Running wipe also through swipe on the words "Swipe to ..."

After wipes (they MUST be done!) - go to the Install main menu item - select the file with the firmware in the zip-archive, the "Zip file signature verification" checkbox is NOT STACKED. Swipe to Confirm Flash. We are waiting for the firmware to finish and click Reboot - System.
========

To install the mods on the firmware, we always first save the current firmware (DO NOT LAZY!), Then use the "Advanced Wipe" menu to make wipes only Cache and Dalvik Cache and through the Install menu we also select the zip file and flash it.

(*) emmc - built-in phone flash drive, if you store something important there, then you can not do wipe

Instructions for firmware via CWM Recovery

Navigate the menu using the volume buttons, select (confirm) with the power button, return to the previous menu with the back button)
Download the desired firmware and dump it to the root of the memory card
We go in CWM Recovery (On the phone off, hold down the volume + and on keys)
Select Wipe data / Factory reset, Wipe cache partition, advanced-wipe dalvickcache (This will delete all your data in the phone’s memory)
Go to Mounts and storage and do the format / system
Choose install zip from sdcard ->Choose zip from sdcard (Chose zip from external sdcard)
Select the archive, wait until the installation is complete
Reboot system now and wait for the phone to turn on, usually after flashing the phone loads longer than usual, so do not get scared and wait patiently

Instructions for the restoration of "brick"

1. Final NVRAM recovery in tablet memory
2. If for any reason you received a “brick” - as a result of unsuccessful firmware, turned off the lights during the firmware, or just unsuccessful experiments, then just flashing the official firmware (short instruction ) through Flashtool and rejoice

IMEI repair instructions

1- In the native diver type * # * # 3646633 # * # * - after dialing the last asterisk you will immediately get into the engineering menu
2- Under the Connectivity tab, select CDS information
3- Choose Radio Information
4- Choose Phone1 (for the first imei)
5- at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.7," "(where in" "enter IMEI 1 sim) (should look like AT + EGMR = 1.7, "xxxxxxxxxxxxx" (xxxx is your imei)
6- click send command
7- should see the message "sent to mSend".
8-Then go back and select “Phone2”
9-at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.10,” "(where in" "enter IMEI 2 sim)
10-click send command, we reboot the phone
11-Dial * # 06 #, in order to check your IMEI.
GPS improvement method
Battery calibration

Useful(CUSTOM RECOVERY, GAPPS, etc.

Ready files for porting firmware!

Modified RECOVERY

TWRP Recovey 2.8.5.0 - Here
CWM Recovery - HERE
TWRP recovery 2.8.1.0 (THL4000) - HERE
Hanuma50 TWRP Recovery- HERE
Philz Recovery - Here

NVRAM donor

NVRAM donor -Here

Disable Smart-wake on custom firmware

Disabling Smart-wake on custom firmware -Here

Script for FULL WIPE (custom recovery

Script for FULL WIPE (custom recovery) -HERE--->How to use?

Patch to maximize sound

Patch to maximize the volume of all speakers (including speaking) / smoothly adjusting the volume both down and up (universal patch) -HERE

Increase memory for applications

Memory remapping (3 options) -HERE

Xperia Keyboard

Xperia Keyboard -HERE

Patch "curve" animation charging when off

Patch -Here

AROMA Filemanager

AROMA Filemanager for our device -HERE

Custom LOGO

Black boot logo -HERE

Kernels

Kernel for STOCK FIRMWARE with init.d- supportHERE

Battery patch

Battery Patch -HERE

Fix NVRAM errors (Wi-Fi)

Fix -nvram_fix.zip(151.68 KB)

Energy saving on the example of cellular frequencies

Energy saving on the example of frequencies of cellular communicationLink

A few words on the battery

A few words on the battery -link

Poll results

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply by creating a new topic in the sectionI want to be curator(having previously studiedRules and recommendations for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddestroyer71 - 14.02.19, 05:40

Reason for editing: editing

[Nikoz47]

M

We move to subsection:Thl

[evgen_vasgen]

Drop someone file from the prosh -Lollipop Dark Ui v.2:
\ system \ vendor \ pittpatt \ models \ recognition \ face.face.y0-y0-22-b-N \ full_model.bin
And then my firmware downloaded with an error and this file is just damaged. Unfortunately I can not download.
Thank you in advance.

[Biecpi]

evgen_vasgen,
Your filefull_model.zip(7.92 MB)

[evgen_vasgen]

Thank you, I have the first plus, which will give to put;)
The question is how many files should there be in this firmware? I have 1613 files and 99 folders. I want to verify it because the zip archive was restored, the abuse of the reducing agent was only on one of the above files, but what the hell is not joking. The brick is very few people want to get

[Biecpi]

evgen_vasgen,

[shumeiko]

Biecpi
Please make Deodex Settings.zip
THL 4000 - Discussion (Post by Antonbeard # 36890273)
from this post.
I want to install this Deodexed stock firmware (from 20141128) with root for CUSTOM Recovery.

[evgen_vasgen]

Biecpi
I wanted to clarify before the firmwareLollipop Dark Ui
do you need to make a factor cuts, and after WIPE CACHE & DAVLIK CACHE?
If everything is indicated in the description of this firmware so that people do not attack the rake.

[Biecpi]

evgen_vasgen,
I wrote the installation process there, if everything is done according to the instructions there will be no problems during the installation

[evgen_vasgen]

Biecpi
Now for the work of the firmware itself: KingJuser is appointed as the root rights manager, I cannot find in it how to disable pop-up notifications about rights granting. It seems not critical, but constantly pop-up notifications are straining. In SuperSu, this moment is easily turned off.

[Biecpi]

evgen_vasgen,
Solution: Delete KingUser (it will be written in the menu), reboot into the recovery and make a reboot to the system, after which the recovery will offer to install the SU to which we agree ... and then as usual

[Biecpi]

Remapping memory!

1) System 1400MB, Data 2900MB -1.4S2.9D.rar(1.29 KB)

2) System 1400MD, Data 2000MB -1.4S.2D.rar(1.29 KB)

3) System 900MB, Data 2900MB-0.9S.2.9D.rar(1.29 KB)

4) STOCK -STOCK.rar(1.31 KB)

Installation strictly via FTool (Backup NVRAM to MtkDroidTools, since the memory is formatted completely for new data!)

Post has been editedBiecpi - 21.04.15, 13:40

[Nevio]

BiecpiThanks, but is it possible to make a patch so that in the Lollipop Dark Ui firmware in the "About phone" menu in Easter eggs version of the android was not "K" but in the lollipop style?

[lexasush]

Help - the recovery through the mobile uncle is not installed - it seems to set, and after rebooting into the recovery it is always loaded into the same thing - the standard chtoli.

[lexasush]

I can not edit my message, so I add this.
Many times I tried to throw different recovery through my mobile uncle, but always overloaded to the android with an open belly, when you press the power button, it crawls out

Post has been editedlexasush - 22.02.15, 14:51

[Biecpi]

Script for FULL WIPE (custom recovery) -Full.zip(292.04 KB)

[jonchestars]

touchscreen does not work what to do Port with LAUDE S800 installed back drain and everything is OK

Post has been editedjonchestars - 22.02.15, 18:47

[Biecpi]

Lollipop Dark FINAL

On some neoff. firmware can be bugs (bugs were, are and will be! Therefore, they are called unofficial!)

Put through a modified Recovery

Download FINAL -Mail.ru

Dolby digital -DolbyDigital.zip(15.67 MB)

Battery Setup -3MinitBatterySettings_update.zip(5.68 MB)

Changelog

System amendments
Removed KingSU
Added SPN configs for many operators

Screenshot

ALL YOU DO AT YOUR OWN RISK !!!

DO NOT FORGET TO MAKE A BACKUP !!! NVRAM section especially !!!

Post has been editedBiecpi - 21.05.15, 11:41

[hrysem]

Installing Lollipop Dark FINAL ...
wrote "Successful"
but also ..
"E: Unable to mount '/ data'"
This is normal?

[vldp0-10]

BiecpiBut will it be possible after the release of the final Windows 10 to flash the phone not an android, but this Windows?

[krash42zzz]

[email protected], 23:30

"E: Unable to mount '/ data'"

And I have this, but not the date, but the cache. Also wondering if this is normal?