> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo P70-A - Firmware



Rep: (62)
Lenovo P70-A - Firmware
PictureLenovo P70-A
Description | Discussion пїЅ | Purchase пїЅ | CyanogenMod firmware, AOSP, AICP пїЅ | Firmware пїЅ

Important information!
Before any actions with the smartphone, it is highly recommended to backup NVRAM and other memory blocks.
Before asking the topic a question about the problem that you will encounter after upgrading to Android 5.1 -strongly recommended to readFAQ!
Using firmware fromBUTversions forT
Drivers and Utilities

Firmware
P70-A firmware
Official firmware
Unofficial firmware
Legend
32bit - Firmware with 32 bit word length;
64bit - with firmware word length of 64 bits;

Post with a selection of firmware
Firmware reviews

Android 4.4 KitKat
VIBEUI
Other ports

Android 5.x Lollipop
MIUI
VIBEUI
Flyme os
Other ports

Android 6.0 Marshmallow
VIBEUI
Other ports


P70-t firmware
Instructions
Recovery / Kernels
Modifications / Patches
miscellanea
Survey Screenshots
1. What firmware based on Android 5.x are you using?
Attached Image

2. What firmware version of Android are you using?
Attached Image



There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedderak1129 - 26.05.20, 21:29
Reason for editing: Editing.



Rep: (19)
Not custom stitched on the VDT. However custom of savyol also not sewn.

Attached Image


Post has been editedImperial Basilisk - 28.08.15, 20:01



Rep: (58)
* Imperial Basilisk, just the same canoe jumped. Tried perezagruzit- hung on the logo (the system vaypnuta). I uploaded in rekaveri and again tried to sew it happened. Upon entering the rekaveri requested something like a re-initialization system- agreed, after the firmware has gone.



Rep: (353)
Imperial Basilisk @ 08/28/2015 20:00*
Not custom stitched on the VDT. However custom of savyol also not sewn.

Yes, then we need a reboot, a feature rekaveri (



Rep: (0)
The Thailand group found in SE. There are many different firmware for our smarta
https://www.facebook.com/groups/124720314527060/

The theme of Lenovo P70-A on XDA:http: //forum.xda-devel...al/lenovo-p70-t3057750

Post has been editedGlebasiK - 06.01.16, 19:00



Rep: (0)
When firmware of recovery gives an error: "Eror executing updater binary in zip" (Further path on firmware). How to fix?
Recovery TWRP-2.8.7.0_by_SevenMaxs, tried different EEPROM: Lenovo P70-A custom firmware (savyol edition) S132, VDT_P70A_S134.

Post has been editedGlebasiK - 15.11.15, 14:43



Rep: (19)
* kurbat .., this is the norm.
Installation instructions custom firmware from a TWRP:

1. Go in Enhanced Recovery TWRP ( How to enter Recovery mode );
2. We choose Wipe - Advanced Wipe;
3. Select the check boxes for the items wipe (format): Dalvik Cache, System, Cache, Data, InternalSDcard (Internal Storage);
  • Please note that the firmware file must be located on a memory card;
    If the memory card you do not, then do not format InternalSDcard (Internal Storage) - that is, the internal memory, because there you put the firmware;
  • Internal memory (phone memory) is formatted with the system. Save your data beforehand;
4. After formatting, leave the arrow back to the main menu and select Reboot - Recovery;
5. Install the firmware through the Install - * choose * file with proshivkoy.zip;

P.S .: Format InternalSDcard (Internal Storage), in fact, not necessarily. But if you want the new firmware is not left "tails" of applications from the old firmware - it is still better to be formatted. If you installed the firmware without a memory card (and therefore does not format the internal memory), you can reformat it after insertion. Simply make a first start, make sure that the firmware is successfully established, and then reboot into Recovery mode and there Wipe - Advanced Wipe tick InternalSDcard (Internal Storage) and format it.

Post has been editedGlebasiK - 22.12.15, 09:44



Rep: (0)
Guys may noob question - phone warranty if shyus and then return the drain insertion - warranty remains?



Rep: (1285)
* droll91, Yes, it is checked, carried in the service.



Rep: (0)
guys help please, where you can change the number of digits to determine the numbers? Search did not really give. In advance thank you all for your help.



Rep: (4)
* stingacel,
Gravity only through boxing



Rep: (0)
Good day. Forum ran, I did not seem to find, if you suddenly did not see much point. And the question is: when receiving Ruta phone reboots with a full discharge or not?



Rep: (2305)
* Wraithalex,
Not.



Rep: (8)
To a question about installing drivers if there are conflicts with the old drivers (as was I).
The method as shown and remove the old drivers is described here:

ATTENTION:
Some entries in the Registry, you can not remove due to insufficient access rights.
In this case, you need to give yourself the right to this (or parent) branch in RegEdit (PTP - Permits).
But this may not be enough time to run the RegEdit utility use PsExec from SysInternals:
start psexec.exe -i -s -d regedit.exe
This will allow to remove any records, but .... BE CAREFUL !!! All at your own risk ... I'm just giving information.

Also apparently(Not tested!*** )You can use this method (Reveal hidden drivers) and to install the driver for the firmware Flash Tools (which flashes for 2 seconds - the procedure simply I catch him). And in this case it has to be highlighted permanently and driver can be installed:
Ports (COM and LPT)
Mediatek Preloader USB VCOM Port (COMx)

*** I do not want to experiment ...

Post has been editedVictor_Man - 18.04.16, 16:49



Rep: (788)
* juvusark,
Put Ruth rekaveri and patch sensor.



Rep: (183)
Well, I bought myself P70-A, in return for P780.
Immediately struck by the camera ... ... or rather soft image quality is low ...
I replaced the camera with my P780.
Now the quality of sound mind. Even more.
If anyone should be ....

Attached files

Attached fileCamera_P70_3.5.6_ (P780) .zip(34.98 MB)


Post has been editeddim_x - 06.10.15, 10:39



Rep: (514)
So, a little trick - Brightness Control (Auto Brightness):

1. Download the archive and unpack throw in / systems with replacement
2. We set the rights rw-r-r
3. Reboot and enjoy.
Attached filesetting.rar(3.96 MB)


Post has been editedGlebasiK - 03.02.16, 13:40



Rep: (4)
Friends help forum users how to correct the time more precisely the time zone, it is worth 3, Moscow, and elsewhere (call history, SMS) forward an hour shows help



Rep: (39)
* allvi,
Put the city of Minsk, the old Trouble ....

Post has been editedandroidmen - 11.10.15, 21:36



Rep: (67)
on firmware Vibe UI 134 noticed a glitch with LED - when the battery is low - LED is red, but when the phone lying on a charge and is charged on 100 - the LED does not change its color to green, and then lights up red, although notice 100% charge appears
and even sometimes reboot does not appear at the menu and reboot the device immediately if you press 2 seconds on the on / off button

as compared with 134 during the official firmware VibeUI battery life at times a half or two more steel during the night of 1-2% of the total, the truth has set for thisLBE security masterandAtlllantis AutoRun Manager [ROOT]to non-systemic, including by Yandex limit

Post has been editeddeustech - 17.10.15, 13:50



Rep: (1285)
Who cares, Behold, this program controls the LED on our devayse on firmware s134 off.Na unprepossessing appearance, but the notification work, green, red and can be backlit with a soft knopok.Akkuratney neutron can pay off the backlight.
В® ButtonLed

Post has been editedALKhod - 17.10.15, 19:26


Full version    

Help     rules

Time is now: 13/07/20, 19:52