Instructions for the firmware via smartphoneSP Flash Tool v5.xx Before any action is recommended to do a full backup system in case of self-reassurance. 1. Download and install the driver firmware mode to a computer, follow
Instructions for installing drivers 2. Unpack the archive with the firmware download to a folder that does not contain the path to her spaces and Cyrillic
3. Download the program SP Flash Tool to the root of drive C: / (D: / or E: /) and run it
SP_Flash_Tool_exe_Windows_v5.1504.00.000.rar(23.18 MB)
4. Make sure that you have selected the desired Download Agent - MTK_AllInOne_DA.bin
5. Push the button «Scatter-loading» and choose the scatter-file
Attention: Scatter-file must be located in the same folder where the firmware is unpacked, you are going to install
Note that when you select a scatter-file there is a certain "feature" - if you're using Android 5.1 and firmware installed on your smartphone: - as an OTA update on your smartphone, the memory layout when updating does not change and, therefore, for further manipulation of the phone is suitable scatter on Android 4.4;
- using SP_Flash_Tool and PC then there was the memory perarazmetka during flashing and consequently for further manipulation of the phone need a scatter of Android 5.1;
If SP_Flash_Tool still gives an error message «PMT changed for the ROM; it must be downloaded » - this is a sign that is not currently used suits you scatter. Try one from the list below (PTP - Save link as):
MT6752_Android_scatter.txt(7.89 KB)
MT6752_Android_scatter_4.4.txt(7.89 KB)
MT6752_Android_scatter_5.1.txt(7.88 KB)
6. In the Option menu in the bar put the check in the Download section DA DL All with Checksum
7. Change the flashing mode with «Download Only» in the «Firmware Upgrade» and click on the arrow button «Download» to start the process
8. Make sure that you have disabled "Quick download" smartphone (after flashing you can turn back):
- In Android 4.4: When you click "Turn off" to turn off the menu uncheck the item "Quick download" if such it is worth;
- In Android 5.1: Go to Settings - Spec. opportunities - against the item "Quick download" turn off the switch when it is activated;
9. Turn off the smartphone and connect it via cable to USB-port PC (it is desirable to ensure that the proceeds from the motherboard, that is, the back of the system unit)
10. We are waiting for the end of the firmware (full backup files) in the program
11. After copying the (appearance of the green checkmark in the box) - To disconnect the smartphone, close the program
12. Turn on your smartphone, wait until the first full load
P.S .: If the tufted Stock firmware from Lenovo, after the first boot the smartphone need to change the region code device: - Open dialer (dialer)
- Introduce a combination #### 6020 #
- Choose your region (country), confirm selection
- Smartphone will reboot to the Recovery and apply the new area code
- After the change the region code will be made with a hard reset by removing the user data
Recommendations for connecting the unit to a PC for firmware
(If you have problems):
It can help both individually and in aggregate:
- remove all the old drivers using phoneUSBDeview You can also and other old / inactive USB drivers, which may interfere with;
- reinstall the drivers from the caps, followingInstructions for installing drivers ;
- reboot Windows, sometimes it helps to reboot into safe mode;
- disable antivirus, firewall, Windows Defender and other programs of this functionality;
- battery must be charged not less than 50%;
- connect your smartphoneafter pressing the arrow button «Download» in SP_FlashTool;
- connectTurning off the machine ;
- connect with a straight forward cable;
- connect without any adapters \ extension cords and hubs;
- connected with the rear side of the chassis in the USB port on the motherboard;
- Connect preferably to USB 2.0 ports, with 3.0 there may be problems;
- analyze log SP_FlashTool (usually C: \ ProgramData \ SP_FT_Logs \ "folder with the date of" \ SP_FLASH_TOOL.log)
- try using a different version SP_FlashTool (for example, SP_FlashTool_v5.1428.05.000);
- if all else fails, try on another computer.
Post has been editedGlebasiK - 05.02.16, 09:12