[X]Assistant

[leocom]

DiscussionAinol AX2
Ainol AX2 - MTK 8312/8382, Numy Vegas
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Reviews

Review, tablet disassembly

ROOT

Getting ROOT - method 1
Getting ROOT - Method 2

Recovery, FlashTool, Firmware

Native firmware, flash drive, driver
CWM recovery, FlashTool v3.1344.0.212 Firmware

The topic is closed. If necessary, you can open a topic. For all questions regarding the topic contact the moderator subsection

Post has been editedSergey_Ace - 13.10.16, 23:24

Reason for editing: Reduced to standard section

[bizonUa]

"Native"firmware
Flashlight
Drivers
P.S. This is for Ainol Numi 3G Vegas (as written on its back cover). I’m clarifying that, unlike the specifications in the header, there is no HDMI connector on my head.His description with pictures.

Post has been editedEnlightened grandfather - 16.02.15, 23:03

Reason for editing: In the header

[leocom]

CWM recovery fits perfectly from AX3, from that theme, it is sewn with a USB flash drive, there is a tablecloth in the set.
CWM + AX3.zip(5.24 MB)

The driver approached me this, others that did not go deleted from the dispatcher, Vin7 OS.
AdbDriverInstaller.zip(8.41 MB)

Here's another driver, pulled from different versions of Ainolov firmware, all under MTC.
Driver.zip(20.72 MB)
Drivers.zip(8.65 MB)

Flashlight used this one.
FlashTool v3.1344.0.212.zip(7.87 MB)


It is stitched as standard for MTK, Flashstool is launched, a tablecloth is selected, we press the download button and insert the cable into the tablet, turn off the tablet beforehand.

Firmware from 07/29/14firmware 115656
Firmware from 05-08-14firmware 085120
It is the last from the Chinese, but the firmware from 01-07-14, which changed it did not understand yet.
Firmware from 05-08-14firmware 085120
This is from the Chinese.
This is also from the Chinese, the tablecloth came up, took its firmware from the merged, after flashing it on the screen saver, it hangs on the splash screen, made a recovery from the wipe, then the tablet started up, the processor became 8312, did not understand much, returned the July one.firmware 8312

Now I clean the July version of the trash.
To be continued. :)

Post has been editedEnlightened grandfather - 16.02.15, 22:59

Reason for editing: In the header

[bizonUa]

Routed from the device usingDingDong Root(I used Version: 1.3.8 Rus, then putSuperSU + Pro + v2.14PatchedRUS, killed DingDong Root, cleaned from unnecessary).

Post has been editedEnlightened grandfather - 16.02.15, 23:01

Reason for editing: In the header

[leocom]

Root did MtkDriodMtk droid, superuser, rutexplorer and mobile-uncle are added too.

Post has been editedEnlightened grandfather - 16.02.15, 22:59

Reason for editing: In the header

[leocom]

The screen is excellent, I do not know the type of matrix, but the viewing angles are very good, the transition to the negative is not visible.

The tablet weighs 266g, in Antutu version 5.5 showed 16,790 parrots, in version 3.4 showed 13,378 parrots.

I disassembled the tablet, the procedure is simple and already standard, unscrew two screws under the cover for the sim card, unscrew the card in the slot and go around the perimeter of the case, just do not insert it deeper than a few millimeters.

Posted on 02/16/2015 22:23:

The 2500 2500 battery, a place to increase it is not much, but there is.

Posted on 02/16/2015 10:27 PM:

The speaker is very quiet, I can not even hear the call, I was looking for ways to solve the problem. As a result, the speaker was added (from the old Samsung) parallel to the native one, the resistance of both of them is 7.8 ohms, 3.9 ohms came out in parallel, the bell became almost normal to hear, for music and cinema anyway it is weak. He took off the velcro and foam rubber, turned the native speaker into the side of the car with a diffuser, and put the second one on top, the case closes normally.

Post has been editedEnlightened grandfather - 16.02.15, 23:02

Reason for editing: In the header

[bizonUa]

For those who know and understand the risk of rash acts -
entrancemeans of the devicein the engineering menu - *#*#3646633#*#*

[AlexanderL]

M

The topic is closed due to a long absence of activity and moved toArchive section Android - Devices