General principles for recovering bootloaders on Qualcomm | HS-USB QDLoader 9008, HS-USB Diagnostics 9006, QHUSB_DLOAD, etc.



Rep: (1779)
The level of complexity of the topic: very difficult
A WARNING!!
IF YOU DO NOT UNDERSTAND THE RISK LEVEL AND THE MECHANISM OF OPERATED UTILITIES
- THAT YOU ARE BETTERDO NOT USEMATERIALS OF THIS TOPIC
--- because instead of recovery - you can MORE MORE KILL YOUR DEVICE
(and in this case, you better give the device to those who are more knowledgeable in these matters)


Before asking questions
1. need to study basic concepts (at least): in the cap " Terms (definitions) "(all) +" General theory "(release "a bit old", but gives a general idea);
++ "Ideally" - to deal with the "Listopenquestions "
2. provide "absolute minimum" necessary info ("rules of the topic"):
  1. links to //savagemessiahzine.com/ devdb / (description of the device) and the theme of the firmware (/ discussion) of the device onsavagemessiahzine.com
  2. [ under the spoiler! ] info about internal sections memory - (preferably - with the size of the sections) ( example ); maybe ask / get in the subject of your device
  3. [ under the spoiler! ] USB VID / PID of the machinein all combinations of buttons / battery: check all options
  4. [under the spoiler!] what was done with the device before it was in such a state? What was tried out of the methods / approaches given in the topic? (in detail! )
  5. [under the spoiler!] conclusionqblinfoone of the loaders (/ programmer) - with firmware (/ dump). (what for, another example of output )
  6. How many hours on (native?) charge was the device before the diagnosis?(Flcb?); preferably also battery charge level (mV / mA)?
  7. on how many PCs (/ what OS) was the diagnosis performed?
  8. [under the spoiler!] own considerations / assumptions (/ doubts (/ questions)) regarding possible solutions
in the absence of an "absolute minimum" of the necessary info - message will be deleted.

PS: if you do not have the opportunity / desire to provide information on all the points above, but there is a desire to get advice from the participants of this topic - formulate the question in the subject of your device, and here - just a link to the corresponding. post in the subject of your device;
If any of the participants in this topic have the opportunity / desire, then you will receive an answer in the subject of your device

Zyy: (recommended) -How to ask questions?

call for compiling a table of correspondence between models of chipsets and equipment manufacturers to identifiers in certificates
how and what to do (for example, SBL *) , what already is ; + also:
The qblinfo utility is officially added to qtools.
Now the current build version for Windows can always be downloaded bythis link.
=====================
qfpr2 - script to get the contents of QFUSES
So far, only for one "type" of platforms - the 2nd, according to my classification. This includes, for example, MSM8x10, MSM8x26, MSM8962, MSM8974, MSM8x92, MSM8994, APQ8084, MDM9x25, MDM9x35. This class is characterized by PBL work in the Sahara, IRAM addresses 0xf8xxxxxx.
I suggest that all owners of devices on platforms of this type run this script and post the resulting out.txt with an indication of the model of the device.
In addition to the "theoretical" benefits in terms of the development of the platform, this should help in solving the practical problem of selecting loaders.

=====================
  • Objective: "to help seekers on the difficult path to restore bricks at Qualcomm"
    The main focus of the topic will be on the "latest versions" of SoC - MSM (/ APQ) 8x ** on eMMC,
    but since “general principles” - it will probably be useful for other SoC series (MDM (/ QSD) 7x ** on NAND (/ MTD)
Tasks
  • to collect and systematize ("bring to a" user-friendly "form) general terminology and definitions
  • systematize and find common methodological principles and approaches to recovery
  • ...
  • assemble working sets ("cases") of brick restoration at Qualcomm
  • ...
  • to develop standard recommendations for the compilation of "recovery cases" of Qualcomm devices for which there are no ready-made cases
____________
"Listopenquestions "
this is probably the most important section of the topic (after "Terms (definitions)" + "General theory")
  • Is it possible to "assemble yourself" (for example, in a HEX editor) "boot" (* msi_image.mbn) from dumps (dd) respectively. partitions (sbl1 (/ 2 (/ 3)) + tz (/ + hyp)) from the working machine?see Answers
  • Why to translate from 9008 to 9006 you need to flash the entire chain of loaders? (after all, they are being re-flashed once again when uploading the full firmware (/ dump of partitions) to 9006)?see Answers
  • What are cookies (magic numbers) and why are they "generally" needed ("what is their meaning")?see Answers
  • On all qualcomm devices, the method of "starting the boot of the device from the" External SD card "(1, 2) "in the 9008th mode ??depends on the values ​​in QFUSES
  • ..
Answers
  • answersSW.* vvevvevve, : thank_you: - better to start from here - and further on the topic (minimum 2 pages)
  • Is it possible to use the same programmer (xPRG ****. Hex (/ mbn))ondifferent devices but with the same SoC? answer1
  • ...
_____________

PS: if after the "Answers" you still have "questions" - then before "restoring something":
or read the whole topic again
or give the device to restore those who are more knowledgeable in these matters
Motive
Motive (prehistory) + archive versions of the caps
__________________
Terms (definitions)
(will be replenished)
to be able to "carry on a dialogue" - the "common" definitions of "what is what"


additionally:
Abbreviations
USB Vendor IDs:http: //developer.andro.../device.html#VendorIds

_________
General theory
"literature" and related notes
prefab 1 ( "in the original theme" )
prefab 2

----------------
"interesting notes" (about fastboot) + "continuation"
nv parameter responsible for microphone amplification(by* = S =, : thank_you :)

==========
eMMC controller has switched to read-only mode:
General principles for restoring bootloaders to Qualcomm (Post acdev # 42655190)
+ ReadOnly on SD cards

PS: in the "last resort" - you can try to search andorder a memory (emmc chip) in china ...
==========
o IMEI:
General principles for restoring bootloaders to Qualcomm (Post kestua # 38839099)
General principles of restoring bootloaders on Qualcomm (Post = S = # 38869956)

Backup IMEI from QPST to Qualcomm Snapdragon 616:Xiaomi Redmi 3 - Official firmware MIUI 7 (OS 5.1.1) (Post purler # 48189506)

bootloader from source based on CAF - you can build! :General principles for restoring bootloaders to Qualcomm (Post S-trace # 48897765)

Big base of jtag pinouts formost smartphone modelsthank* Vladimirs77,
General principles for restoring bootloaders to Qualcomm (Post Vladimirs77 # 50087863)

==========

USB Vendor IDs:http: //developer.andro.../device.html#VendorIds
OEM Drivers:http: //developer.andro..s/oem-usb.html#Drivers
Google USB Driver:http://developer.android.com/sdk/win-usb.html
Attention!! Regarding "Relink HS-USB QD Loader 9008 (COM *)":
Acdev @ 02.26.2016, 14:45*
screw driver RELINK kosyachit and it must be removed.
For the place it is necessary to put Google or from the vendor.

+ QDLoader HS-USB Driver 32-64 bit
+ moreQualcomm HS-USB QDLoader 9008 driver for Windows x64 // x86
==========
How to generate the **** _ msimage.mbn (as an example; on Windows using QPST (emmcswdownload.exe))
General principles of restoring bootloaders on Qualcomm (Post wladimir_tm # 43253768)

====
Bootloader LuminesCollection of official firmware

Restore from the Hard Brick (9008) mode of the Nokia Lumia 525 (RM-998) smartphone.

UFS standards (Universal Flash Storage) - thank * Kramar111,

About transferring phones to SD 650 to EDL by shorting USB D + to ground
Information, datasheets and schemes msm 8916
____________
"Ready recovery cases"

MSM7225A (HTC Desire C)
General principles of restoring bootloaders on Qualcomm (Post -Zhuk- # 50174000)
...
Qualcomm Snapdragon 200 MSM8612:
Lenovo A785e (China Telecom)General principles for restoring bootloaders to Qualcomm (Post grass7 # 41425745)

===
Qualcomm Snapdragon 400 MSM8228:
General principles of restoring bootloaders on Qualcomm (Post vvevvevve # 40862977)

===
Qualcomm Snapdragon S4 Pro APQ8064:
ZTE Nubia Z5 (NX501)

===
Qualcomm Snapdragon 800 MSM8974:
Lenovo K910SS
LG G2 + savagemessiahzine.com: (Post kestua # 39298647) (LG G2 - Unbrick)

===
Qualcomm Snapdragon 801 MSM8974AB:
ZTE Grand S II:Restore bricks! Method number 2! Repair IMEI!

Qualcomm Snapdragon 801 MSM8974AC v3:
Moto X Gen2 General principles for restoring bootloaders to Qualcomm (Post S5610_best # 50312537)

===
Qualcomm Snapdragon 805 MSM8084:
Unbrick Motorola Droid Turbo
===
Qualcomm Snapdragon S4 Pro APQ8064
Recovery Instructions Sony Xperia Z C6602 / C6603 / C6606 / C6616
===
HTC Desire X-Qualcomm Snapdragon S4 Play MSM8225
General principles of restoring bootloaders on Qualcomm (Post kestua # 71541490)
===
Qualcomm Snapdragon 430 MSM8937 (Honor 7C)
Instructions for firmware Board, raising bricks

___________
Utilities
QLM CPU Info - Utility for reading records QFPROM
QC-Privided:
OEM Provided
Miflash (Miphone / MIUI ROM Flashing Tool):
official page with manual (EN): Download MIUI ROM Flashing Tool (alwayslatestversion + xiaomi ROMs):http://en.miui.com/a-234.html
Malchik-solnce @ 01/27/2014, 6:30 PM*
... Drivers / Utilities / Add-ons ->MiFlash
Download - MiPhone2.11.6 (Option 1)
Download - MiPhone20131108 (Option 2)
Download - MiPhone20140509 (Option 3)

MiPhone20141107:http: //bigota.d.miui.c...ls/MiPhone20141107.exe
MiPhone2015731 @savagemessiahzine.com: General principles of restoring bootloaders on Qualcomm (Post wladimir_tm # 42794251)
MiFlash 2016.03.30.0 (64bit)
MiFlash 2016.04.01.0 (64it)

QFIL (via Lenovo):
lenovo-forums.ru

utilities for working with IMEI -thankSW.* ariafan link and uv. * acdev, link


______
DEV-Provided
USBlyser:
Version: 2.1
Released: March 16, 2014
Size: 3.9 Mb
Limitations: Fully functional 33-day trial
If you want to understand seriously, then install and run a sniffer on this port - for example, USBlyzer, and post a log of such an attempt in QFIL.
Yes, when using USBlyser, you need in the settings: Capture - Capture Settings - URB Transfer Buffer Size Limit to set the maximum allowable value for your version of the program.


HEX automatic conversion file of gpt.bin values ​​(obtained dd if = / dev / block / mmcblk0 of = / sdcard / gpt.bin bs = 8 count = 2176) into text content rawprogram0.xmlexcel tools - thank * Bazzz2,

qtools project:
github, General principles of restoring bootloaders on Qualcomm (Post vvevvevve # 40306059)
++ qblinfo how and what to do (for example, SBL *)

DFS Professional CDMA Tool:
http://cdmatool.com
General principles of restoring bootloaders on Qualcomm (Post Olezhek1975 # 38804787)
General principles of restoring bootloaders on Qualcomm (Post wladimir_tm # 38808958)

NV-items_reader_writer:
[TOOL / GUIDE] Full NV Backup and Restore [SIMPLE] [08-03-2012]
+ example of instructions for working in the program


recovery script for collecting the partitions info (mmcblk0info.sh/zip):
http: //forum.xda-devel...=56569542&postcount=71

EFS Professional:
http: //forum.xda-devel…-professional-t1308546

Brixfix:
http: //forum.xda-devel...owthread.php? t = 2136738

eMMC RAW Tool @savagemessiahzine.com: eMMC RAW Tool

boot-unlocker-gnex:General principles for restoring boot loaders to Qualcomm (Post nerwin # 40222279)
https://code.google.com/p/boot-unlocker-gnex/
BootUnlocker for Nexus Devices - Unlock your bootloader without fastboot.
This application REQUIRES a Galaxy Nexus (maguro, toro or toroplus), Nexus 4 (mako), Nexus 5 (hammerhead), Nexus 7 2013 (deb or flo), Nexus 10 (manta), or OnePlus One (bacon / A0001), with root.


Qualcomm Firmware Toolby* vin2809

В®Partitions Backup & RestoreSome screenshots to explain the process:В®Partitions Backup & Restore (Post aleha81 # 39380773)
Partitions Backup & Restore v1.6.0 RUS- thank* htc 600,

aureljared / unbrick_8960:https://github.com/aureljared/unbrick_8960

WriteDualIMEI utility (W + G_eMMC)ARK Benefit A3 - Official firmware

Maud. fastboot.exe, which "can" send the "reboot-edl" command to the bootloader "directly" (without the "oem" prefix)) - using the "fastboot_edl reboot-edl" command line;
thank* emusic General principles of restoring bootloaders on Qualcomm (Post emusic # 50224890)


emmcdl:
thank* peter23, "for the find" :)
Visible support for firehose, visible ability to read a USB flash drive from the phone, and not just write (first of all, this is interesting).
General principles of restoring bootloaders on Qualcomm (Post peter23 # 50287938)

+ Found a more recent version 2.15General principles of restoring bootloaders on Qualcomm (Post peter23 # 50314988)

a set of batch files for automated read / write sections via emmcdl - thanks* emusic
General principles of restoring bootloaders on Qualcomm (Post emusic # 50332273)


______
______
Instructions

full dump flash drives:
* how to remove a full dump flash drive if there is no slot for an SD card + universal and platform-independent - script: thank_you:* vvevvevve,
* and simpler (but "not guaranteed") General principles of restoring bootloaders on Qualcomm (Post wladimir_tm # 41497005)
* on habrahabr.ru: link to instructionsGeneral principles of restoring bootloaders on Qualcomm (Post Olezhek1975 # 43247628)
--------------
** "right on the (live) device" to make a "recovery SD"

"even on WinXP" - you need to "disable signature verification" drivers: thank_you:* Magnat.mg

first 100MB backup (using app "Partitions Backup & Restore") General principles of restoring bootloaders on Qualcomm (Post wladimir_tm # 41429130)

Resistance for finding test points (resistor 75-100 ohm)

"instructions in pictures": QFIL Backup and restore EFS:Lenovo S90 - Firmwares (OS 4.4.4 - 5.X.X) (Post MATVE # 40689013)

Repair IMEI via qpstHighscreen Omega Prime Mini - Discussion General principles of recovery loaders on Qualcomm

"example" (read context):Translation instructions from Xiaomi.eu, adapted for increasing the section / data to 6 gigs (using parted)

"example" on the firmware using MiFlash:


example commands - to "see sections"

[GUIDE] How to make a backup of your computer without sdcard

approximate example:(Windows + VMWare Ubuntu) recovery chain loaders (from state 9006) (+ UBUNTU VMWARE IMAGES
orubuntu-14-04-1-lts-trusty-tahr-desktop-64-bit

as with Miflash (in "9008th mode") - you can flash "only selected partitions" + "dummy.img" = a good example of "dummy img-image"
______

Cap updates

================================
================================
== 4copying ==
absolute minimum CODE
in the header: [B] [URL = //savagemessiahzine.com/forum/index.php?showtopic=643084#aminimal animal "absolute minimum" required info: [/ url] [/ b]

version archive caps
================================
================================

20161108
About transferring phones to SD 650 to EDL by shorting USB D + to ground

20160915
fornewbiesin the subject:
A prerequisite for writing messages in this topic is: provide the "absolute minimum" of the necessary info for your device.
if it is not clear how to get this:
1. immediately look for a normal SC ("service center")
2. contact the appropriate forum section (=Tehnotrepalka)
PS: in case of non-fulfillment of this condition - messages of newcomers will be deleted (and of course - left unanswered)

If you do not have the opportunity / desire to provide information on all the points above, but there is a desire to get advice from the participants of this topic - formulate the question in the subject of your device, and here - just a link to the corresponding. post in the subject of your device;
if any of the participants of this topic have the opportunity / desire - then you will receive an answer in the subject of your device [/ i]

20160902
UFS standards (Universal Flash Storage) - thank* Kramar111,

20160624

"absolute minimum" necessary info: [/ b] [background] [list = 1] [*] links to//savagemessiahzine.com/ devdb /(description of the device) and the theme of the firmware (/ discussion) of the device onsavagemessiahzine.com [*][under the spoiler!] info about internal affairs memory - with the size of sections (example)
PS: if you do not have the opportunity / desire to provide information on all the points above, but there is a desire to get advice from the participants of this topic - formulate the question in the subject of your device, and here - just a link to the corresponding. post in the subject of your device;
If any of the participants in this topic have the opportunity / desire, then you will receive an answer in the subject of your device


[*]If you do not have the opportunity / desire to provide information on all the points above, but there is a desire to get advice (possibly) from the participant of this topic - state your question in the subject of your device, and in this topic - only a link to the corresponding. post in the subject of your device;
If any of the participants in this topic have the opportunity / desire, then you will be answered in the subject of your device


20160612
a set of batch files for automated read / write sections via emmcdl - thanks* emusic
General principles of restoring bootloaders on Qualcomm (Post emusic # 50332273)

20160611
change
"absolute minimum" required info
p.5<->p.1

Moto X Gen2(Snapdragon 801 MSM8974AC v3 / Krait 400)General principles for restoring bootloaders to Qualcomm (Post S5610_best # 50312537)

emmcdl:
thank* peter23, "for the find" :)
Visible support for firehose, visible ability to read a USB flash drive from the phone, and not just write (first of all, this is interesting).
General principles of restoring bootloaders on Qualcomm (Post peter23 # 50287938)
+ Found a more recent version 2.15General principles of restoring bootloaders on Qualcomm (Post peter23 # 50314988)

20160609
Archive updates caps

MSM7225A (HTC Desire C)
General principles of restoring bootloaders on Qualcomm (Post -Zhuk- # 50174000)

Big base of jtag pinouts formost smartphone modelsthank* Vladimirs77,
General principles for restoring bootloaders to Qualcomm (Post Vladimirs77 # 50087863)


Maud. fastboot.exe, which "can" send the "reboot-edl" command to the bootloader "directly" (without the "oem" prefix)) - using the "fastboot_edl reboot-edl" command line;
thank* emusic General principles of restoring bootloaders on Qualcomm (Post emusic # 50224890)

20160608
current QPST versions from the network (QPST2.7.422-437) - thanks!* peter23,
General principles of restoring bootloaders on Qualcomm (Post peter23 # 50215409)

20160524
MiFlash 2016.04.01.0 (64it)
Restore from the Hard Brick (9008) mode of the Nokia Lumia 525 (RM-998) smartphone.

utilities for working with IMEI -thankSW.* ariafan link and uv. * acdev, link

Partitions Backup & Restore v1.6.0 RUS- thank* htc 600,

as with Miflash (in "9008th mode") - you can flash "only selected partitions" + "dummy.img" = a good example of "dummy img-image"


CORR:
[*][under the spoiler!] cmdline off firmware and lsusb (USB VID / PID) of your device in all button / battery combinations:check all combinations

20160513
modiff:before asking questions:
from:
before asking questions:
is necessary learn the basic concepts (at least): in the cap "Terms (definitions)" (all) + "General theory" (release "a bit old", but gives a general idea);
++ "Ideally" - to deal with the "Listopenquestions "
"absolute minimum" required info: [list = 1] [*] link to a topic with a discussion of the device / firmware
[*] What did you do with the device before it was in such a state? (in detail!)
[*] Are any firmware available for him in the form of files (a) images (a)? If yes, give a link to one of them.
[*] What is USB VID / PID now? (in the device manager) //+ Also switch "view" - "on connection": there may be several devices
[*](possibly) for (native) charging for several hours; after - try to turn it on again(Flcb?)
[*] try on another PC
[*]check all combinations of clamping volume control buttons when the device is turned on and a USB cable is connected to it; also with battery disconnected
to:
before asking questions:
withof todayand for the future:
for newbies -
A prerequisite for writing messages in this topic is: provide the cmdline and lsusb of your device.
if it is not clear how to get it:
1. immediately look for a normal SC ("service center")
2. contact the appropriate forum section (= "Technical Repairs")
PS: in case of non-fulfillment of this condition - messages of newcomers will be deleted (and of course - left unanswered)
also:is necessary learn the basic concepts (at least): in the cap "Terms (definitions)" (all) + "General theory" (release "a bit old", but gives a general idea);
++ "Ideally" - to deal with the "Listopenquestions "
"absolute minimum" required info: [list = 1] [*] link to //savagemessiahzine.com/ devdb / and the topic of the discussion / firmware device
[*] What was done with the device before it was in such a state? What was tried out of the methods / approaches given in the topic? (in detail! ) + own considerations / assumptions regarding possible solutions
[*]conclusionqblinfoone of the loaders (/ programmer) - with firmware (/ dump). (what for, another example of output )
[*] USB VID / PID (better - lsusb (-tv)) in all combinations:check all combinations of clamping volume control buttons when the device is turned on and a USB cable is connected to it; also with battery disconnected
[*] How many hours on (native?) charge was the unit before the diagnosis?(Flcb?); battery charge level (V / mA)?
[*] how many PCs (/ what OS) were diagnosed?
[*] (recommended) -How to ask questions?


20160416
bootloader from source based on CAF - you can build! :General principles for restoring bootloaders to Qualcomm (Post S-trace # 48897765)

В®Partitions Backup & Restore Some screenshots to explain the process: В®Partitions Backup & Restore (Post aleha81 # 39380773)

20160415
MiFlash 2016.03.30.0 (64bit)


20160412
Backup IMEI from QPST to Qualcomm Snapdragon 616:Xiaomi Redmi 3 - Official firmware MIUI 7 (OS 5.1.1) (Post purler # 48189506)


20160328
spoiler = DEV-Provided]
USBlyser ...

20160312
DEL
fresh versions of some kvalkommovskih utilities

20160229

header:
del
!!-- subject only in the initial stage of design --!!
Mission: "to make Qualcomm as recoverable as MTC"


change list
"absolute minimum" necessary info: [/ b] [/ background] [list = 1] [*]


20160226
Attention!! Regarding "Relink HS-USB QD Loader 9008 (COM *)":
Acdev @ 02.26.2016, 14:45*
screw driver RELINK kosyachit and it must be removed.
For the place it is necessary to put Google or from the vendor.


+ QDLoader HS-USB Driver 32-64 bit
+ moreQualcomm HS-USB QDLoader 9008 driver for Windows x64 // x86

====
Bootloader LuminesCollection of official firmware

20160209

about fastboot) [/ url] +"continuation"

20160203
HEX automatic conversion file of gpt.bin values ​​(obtained dd if = / dev / block / mmcblk0 of = / sdcard / gpt.bin bs = 8 count = 2176) into text content rawprogram0.xmlexcel tools - thank * Bazzz2,

20160123
PS: in the "last resort" - you can try to search and order a memory (emmc chip) in China ...

Archive updates caps

_________




There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedderak1129 - 22.11.19, 14:03
Reason for editing: QLM CPU Info



Rep: (4332)
olezhek1975 @ 08/02/2016, 3:15*
Further work fastbut, Georgia with him rekaveri way - and you have a DAS on the hands. The old system as the world.

Where did you used to be a nice man, and all so I was only performed fastboot boot 036-recovery.img while the 036-recovery.img lying in ADB folder (see PC 9006). and then using QPST 2.7 without using the loader dumps threw (threw the boy)



Rep: (1016)
htc 600 @ 08/02/2016, 00:29*
Where did you used to be a nice person,

Well here DAS / fastbut offtopic. Did hint, but already there on the ADB / fastbutu see for yourself. And dump several ways poured into the 9006 port.
Okay. Stop flood, Congratulations.

Post has been editedOlezhek1975 - 08.02.16, 03:33



Rep: (4332)
Just phone through rekaveri not see I have to beg again flash drive (I have it restored akroniksom) because This kid's half-installed system apps removed and I do not have them, respectively, and has no IMEI number, will prompt how to put (one sim card)



Rep: (1016)
htc 600 @ 08/02/2016, 00:33*
IMEI number is not present, will not prompt how to put

Not well, who do you or I?)))) Search on the word immediately suggests IMEI article
Highscreen Omega Prime Mini - Discussion (Post Wehif # 26897599)



Rep: (4332)
olezhek1975 @ 02/08/2016, 3:39*
Not well, who do you or I?)))) Search on the word immediately suggests IMEI article

I'm sorry, I just do three things at once: lol: and thoughts before flying ....: lol:, and prosypatsya 2 hours: lol:



Rep: (7)
Hello!
Tell me how it is possible to restore the Xiaomi Mi Note Pro.
Ruth was on the phone, installed firmware from Multirom weekly. I decided to upgrade and download the stable with the Chinese off. site. TWRP put through the installation zip file, all raspokovalos and in the end I lit logo on the home screen and can also be loaded into fastbut. On your computer is not defined, tried to install wood - does not see. Tried to install the firmware through misyut - reaches 50% and hangs.
Can anyone help how to revive?



Rep: (886)
All dobra.V addition toGeneral principles of recovery downloaders on Qualcomm (Post wladimir_tm # 38106925)I do not know, we can be helpful. Hex dabbled and came across an interesting command:
fastboot oem dumppartition

RESULT
Attached Image

I am not strong in this course, but understand it flushes markup addresses. It would be interesting to look at the body of the tablet with a damaged flash acceptable. Fastbuta version 0.5 if that. More teams in any ponahodili Hex aboot th:
fastboot oem
fastboot oem unlock
fastboot oem unlock-go
fastboot oem verified
fastboot oem device-info.preflash
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem erase
fastboot oem reboot-recovery
fastboot oem reboot-testmode
fastboot oem reboot-dloadmode
fastboot oem reboot-edl
fastboot oem continue
fastboot oem ramtest

And yet ... in HELPE very well interested in:
Attached Image
I understand (according to the translation of the right side of plate) with these teams have the opportunity to(Phantom Hope)flash any section even when locked bootloader ??Try chegonit not dare to sew. Though .. you can try rekaveri original even with minimal change to shove. The time will definitely try.

Post has been editedMagnat.mg - 08.02.16, 15:17



Rep: (966)
* Magnat.mg
I described 90% of these commands
and 90% of them have to be available, they are protected mk)



Rep: (0)
And so, good evening.
Gigabyte GSmart Rio R1 able to Qualcomm HS-USB QDLoader 9008
"absolute minimum" required info:
1. Gigabyte GSmart Rio R1,theme
2. How did it happen? - Translated bodies in this mode the buttons are connected to the PC, format the partition requested Wind - Well, I told her, and did not deny)
3.Sposob forscratchingof hisTopicsdoes not work,
If I correctly understood all read here, some way must create **** _ msimage.mbn and rawprogram0.xml, then sew it all with the help of qpst. And only then sewn with the above method.
And where do we get the **** _ msimage.mbn etc.?



Rep: (1016)
cs_plan @ 08.02.2016, 19:19*
Method for raskirpichivaniya of its themes does not work,

show firmware screen. which is sewn through the Tools recovery.



Rep: (0)
And what if QFIL port sees a QPSTConfig - there is no point not add port helps



Rep: (0)
firmware files
Attached Image


Post has been editedwladimir_tm - 09.02.16, 08:17
Reason for editing: spoiler



Rep: (480)
* cs_plan,
Duc has it all?
Attached Image



Rep: (1016)
cs_plan @ 08.02.2016, 20:11*
firmware files

you've got everything completely and not have to invent anything



Rep: (0)
Hello. Anybody can help raise msimage MPRG files under the Xperia Tipo?
Or suggest how to do it. thanks



Rep: (480)
mix910k @ 09.02.2016, 14:29*
MPRG files

carry in SC

essentially - mprg not collect, they are ready. where to get? in the Internet.
but Sony approach that you find other phones that did not work (although old tube, can be).
not seen a single case study of successful recovery through Sony qpst.
You can try to dump the memory card.

Post has been editeddj60 - 09.02.16, 15:47



Rep: (1016)
mix910k @ 09.02.2016, 12:29*
MPRG files under the Xperia Tipo?

dj60 @ 09.02.2016, 12:42*
carry in SC

Absolutely agree. Sony, by any known method of 05C6: 9008 could not withdraw without odds.



Rep: (480)
olezhek1975 @ 02/09/2016, 14:48*
Sony, by any known method of 05C6: 9008 could not withdraw without odds.

humbly sweeping the exclusion from the Z1 and Z Ultra - laser made in the light version of public setool - s1tool.



Rep: (1016)
dj60 @ 09.02.2016, 12:51*
humbly sweeping the exclusion from the Z1 and Z Ultra - laser

faced, I will be kept in mind)



Rep: (1)
Guys this kind of problem, I have a phoneLenovo Vibe Shot Z90 after dancing with a tambourine around the firmware phone has ceased to be loaded
1) Earnings before writing"Initializing" and reboot .
2) On board was only drain rekaveriUpdate.zip does not roll comes to 49% and feil update! (Mod) where it happened to both began this story)
3) Is unsuccessful firmware that is in modeQualcomm HS-USB QDLoader 9008 (USB \ VID_05C6 & PID_9008 & REV_0000) It comes without any problems.
4) phone disassembledI can discard the battery and any state to withdraw in 9008 TestPoint mode
In mybranchadvised to sew on Z90a40_S209_150716_ROW_qpst as mentioned above it is useless ...
I attach process logs209 firmware via MiFlash and QFIL
Attached fileMiFlash 209.log(1.4 MB)
Attached fileQFIL 209.log(185.96 KB)

I would be grateful for any help, is ready to provide any other information, but those who understand in logag see what was going on, I experienced this for the first time!

Post has been editedYarentey - 09.02.16, 20:51


Full version    

Help     rules

Time is now: 29/02/20, 23:45