[X]Assistant

[joni007]

DiscussionDNS AirTab MC1011
DNS AirTab MC1011
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

DNS model AirTab MC1011
Black colour
Screen
Screen size 10.1 "
Screen resolution 1280x800
The screen cover is
IPS screen technology
Type of touch screen capacitive
Multi-touch screen is
System
Android operating system
RockChip RK3188 processor / chipset
The number of processor cores 4
1600 MHz processor frequency
Mali-400MP4 video processor
The size of RAM 2048 MB
16 GB internal memory
Memory card slot available
Type of micro SD memory card
The maximum size of a memory card is 32 GB
Wireless connection
Wi-Fi support is
Wi-Fi 802.11b / g / n standard
Bluetooth support is
Bluetooth 4.0 version
Wireless Module (Mobile Internet) 3G
Work in cell phone mode
Camera
Rear camera is
The number of rear camera megapixels 5.0
Front camera there
The number of megapixels front camera 2.0
Nutrition
Battery capacity 6000 mAh
Sound
Built-in speaker is
Stereo sound
Built-in microphone is
Functionality
GLONASS navigation system support no
GPS receiver no
Automatic screen orientation is
Accelerometer sensors (G-sensor)
Qwerty virtual keyboard
Connection
USB type micro USB connectors
Mini HDMI video outputs
MHL support is
Audio interfaces audio output / headphone
Connector type mini-jack headphones 3.5 mm
Additional Information
Body material metal, plastic
Warranty card, charger, OTG cable, protective film, instruction manual
Dimensions, weight
Width 171.5 mm
Height is 257 mm
Thickness 10.05 mm
Weight 625 g

Photo

Firmware

Of firmware
Instructions on firmware

Useful

Install ROOT Kingo Android Root
Compatible tach

Being in this topic you must comply with:Resource rulessavagemessiahzine.comand Section RulesAndroid - Devices"

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you need to add links or contact directly toQMSresponsible for the sub-moderatorAn enlightened grandfather.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(having previously studied the topic header and all materials for curators) or will contact directly the moderator responsible for the subsectionAn enlightened grandfather.

Post has been editedEnlightened grandfather - 19.07.16, 16:54

Reason for editing: Compatible Touch

[Sergey_Ace]

M

The topic has been moved to subsection “DNS�
Since your device is not yet in the databaseDevdb, you can not add it to the description and select in the profile.
You need to fill out an application for adding a device to the database at this address:http: //savagemessiahzine.com/ devdb / pad / new /.

[amapkopd]

With a flash drive, you can flash it or only with a PC and whether it will help off. Firmware return sound? More battery. I watched for 8,000 watched but the charge does not hold, it takes a long time to charge and sits down quickly.

Posted on 01/24/2015, 16:53:

Does my firmware have this mc_1011_v21_10.02.2014_01 version of the kernel 3.0.36+ in the header is the same?

[lionnio339]

amapkopd, I’m not going to tell you about the version (as far as I remember, the release date of the software in the header corresponds exactly to what you indicated), but in all such tablets that you brought, the audio connector was the reason for the lack of sound. Less often the speakers themselves. The firmware is most likely nothing to do with. But the batteries very often come into disrepair. Charge fully, check if the time is consistent with what is indicated on the site (for example, in the movie playback mode).

It is easiest to flash using Rock Batch tools 1.7; older versions of the tablet utility cannot be seen.

Post has been editedlionnio339 - 25.01.15, 17:25

[amapkopd]

By sound, it is there, but only in the settings you can hear, and when you turn on the music or movie, then only in the headphones, how to choose the battery for it, you just need one that costs or comes in size, do not tell the original z. to it goes on how many watts?

[amapkopd]

And yet, this model of the tablet that they brought to you all of them are so constrained in the sense of not very fast as it works smoothly, everything does not slow down, of course, but you don’t feel the flight? Can I speed it up?

[lionnio339]

Well, yes, there are signs and such with a non-working connector (it is necessary to ring the pins of the audio connector to say). To ping, you need to at least unsolder the antenna (foil) of the 3G module - it will interfere. When the headphone plug is pulled out, two contacts to the left of the connector must "ring". Also the right two. But when inserting headphones should not be called. Batteries put and others, just to fit in size. Tried also from the model m100 / m100g. The size fits perfectly (it is thinner), but there already 7200mah are declared. But it is much easier to rise from a deep discharge. Often a faulty battery also affects performance, but the question about the “brakes” is quite subjective, in general, the device is quite smart, although of course with what to compare.

The power supply unit is suitable for any compatible parameter (5V 2A), but also 5V 2.5A is possible, even more remarkable.

Post has been editedlionnio339 - 25.01.15, 18:25

[amapkopd]

Check the firmware archive, when unpacking writes file is damaged. And what are the numbers inside the dns m1035?

[lionnio339]

amapkopdchecked out. The link is all OK. Retrieved correctly. Apparently when you downloaded it was "broken."

m1035 - presumably the name of the model (the Chinese equivalent of our tablet), or to be more precise, the original name of this model

Post has been editedlionnio339 - 31.01.15, 17:05

[ostego1]

What clones does this device have?

[Napalm2009]

The question is who has backup dns airtab mc 1011 firmware skinte link

[ostego1]

Napalm2009 @ 05/03/2015, 19:59

The question is who has backup dns airtab mc 1011 firmware skinte link

http://ftp.dns-shop.ru/Tablet_PC/MC1011/

[Napalm2009]

[email protected], 22:20

ostego1

thank

[Sittter]

And where to get USB drivers for firmware?

[joni007]

The people who can copy and post the trial touchscreen driver file file - ft5x0x_ts.ko be here / system / lib, with me there will be a huge plus

[shurup48]

presented to his nephew for his birthday, he is 6 years old. Two weeks later he broke the charging connector. I gave it to a friend to solder. In the end, the phone is slowly, but charging. The charging process itself is not displayed. The battery icon stands still, or rather behaves as if charging is not connected. Tobish charging falls. If you turn off and turn on the tablet, the charge level increases. That is, in fact, the tablet is charging, but the process is not visible. The computer also does not see the tablet. Any thoughts?

[Mefix]

Who sorted out? Can I have a photo of the tail plume? Or the desired labeling. It is necessary to find a replacement touch, and then a friend broke up. The touchpad still plows, but when parsing, you can finish off the touch, so it's best not to disassemble once again in my case.

[iveyka]

http://ul-phone.ru/sho...ver-40-rs-m101-tf-440/
Touch for him. Only the frame is different. The frame can be removed, but the touch in it is planted on glue. So very neat.

Posted 06/04/2015 10:31:

Guys, is there a scheme for it? Google is silent

Post has been editedcherva70 - 14.09.15, 16:36

Reason for editing: In the header

[oleggy]

Instructions on how to flash:

1. unplug the device
2. press and hold the СЂРѕРј ()) button
3. Connect the tablet to the computer with a USB cable.
4. An unknown device should appear on the system on which Windows will start looking for drivers, as a result, the Rockusb Device device should be installed

then you can use the program RKBatchTool

[Peugeot406max]

пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ Rockchip

download

We will need:
1. firmware program

Rockchip Batch Tool v1.7

Rockchip_Batch_Tool_v1.7.rar(797.51 KB)

2. the firmware itself
Instructions on firmware
1. Download and unpack Rockchip Batch Tool v1.7
2. Turn off the tablet and get the memory card.
3. Clamp and hold the "volume up" button and connect the tablet to the computer. We do not release the key until the computer finds new hardware.
4. The computer will offer to install drivers for our tablet. Specify the driver manually; it is located in the folder with the newly unpacked utility.Rockchip Batch Tool on the way / Rockchip Batch Tool / RockusbDriver
5. Run the Rockchip Batch Tool and see this window:

If you did everything correctly, then the square in green should be lit in the bottom of the Connected device (as in the screenshot).

6. Click on the ellipsis in the FW Path field and specify the path to your firmware in * .img format.
7. The path indicated to the firmware, now click on the "Restore" button and wait for the end of the firmware:

8. As soon as the firmware process is complete, your device will reboot. Now you can disconnect it from the computer and start using.

[Peugeot406max]

Install ROOT

Kingo Android Root

Kingo Android Root

Post has been editedcherva70 - 14.09.15, 16:34

Reason for editing: In the header