240 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> ASUS RT-AC66U - Discussion | [wifirouter] Discussion, settings, help
ramblefish
Message#1
16.03.14, 19:29
mood on ██████████] 99%
*******
[offline]

Topics Curator
Group: Curators
Messages 744
Check in: 19.09.12
Samsung Galaxy J1 (2016) SM-J120F / DS

Reputation:-  32  +

ASUS RT-AC66U - Discussion

Attached ImageAttached ImageAttached ImageAttached ImageAttached Image


A photo:
Attached ImageAttached Image
Attached Image

Description:
Wi-Fi 802.11ac and Gigabit Ethernet dual band router

• Support for high-speed standard Wi-Fi 802.11ac;
• Cloud service ASUS AiCloud;
• Gigabit Ethernet wired ports;
• Powerful removable antennas provide a large wireless coverage area;
• Convenient graphical interface;
• System of offline download of files Download Master;
• Two multifunctional USB ports.

��������������: download

Supported Network Standards
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.3u, IPv4, IPv6

Product Segment
AC1750 ultimate AC performance; 450 + 1300Mbps

Data rate
802.11a: 6,9,12,18,24,36,48,54Mbps
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11n: up to 450Mbps
802.11ac: up to 1300Mbps

Antenna
Detachable antenna x 3

Operating Frequency
2.4G ~ 2.4835GHz /5.1~5.8GHz

Encryption
64-bit WEP, 128-bit WEP, WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise

Firewall & Access Control
Firewall: SPI intrusion detection, DoS protection
Access control: Parental control, Network service filter, URL filter, Port filter

Management
UPnP, DLNA, DNS Proxy, NTP Client, DDNS, Port Triger, Virtual Server, DMZ

VPN support
Ipsec pass-throuth
PPTP Pass-Through
L2TP Pass-Through
PPTP server

WAN Connection Type
Internet connection type: Automatic IP, Static IP, PPPoE (MPPE supported), PPTP, L2TP
Dual Link support
Multicast Proxy support

Utilities
.Download master
- support BT, NZB, HTTP, ED2K
- support encryption, DHT, PEX and magnet link
- upload and download bandwidth control
- download scheduling
.Media server:
Image: JPEG
Audio: mp3, wma, wav, pcm, mp4, lpcm, ogg
Video: asf, avi, divx, mpeg, mpg, ts, vob, wmv, mkv, mov
.QoS:
WMM
User definable rules for IP / MAC / Port. Upload and Download bandwidth management.
ACK / SYN / FIN / RST / ICMP with Highest priority
.Guest Network
2.4GHz guest network x 3, 5GHz guest network x 3
Printer Server: multifunctional printer support (Windows nly), LPR protocol support
.File server: Samba and FTP server with account management
.PPTP VPN server
.Network map
.Traffic monitor

Ports
1 x RJ45 for 10/100/1000 BaseT for WAN, 4 x RJ45 for 10/100/1000 BaseT for LAN, Support Ethernet and 802.3 with max. bit rate 10/100/1000 Mbps and auto cross-over function (MDI-X)
USB 2.0 x 2

Button
WPS Button, Reset Button, Power Button

Led indicator
PWR x 1
LAN x 4
WAN x 1
AIR x 2
USB x 1

Power supply
AC Input: 110V ~ 240V (50 ~ 60Hz)
DC Output: 19 V with max. 1.58 A current

Dimensions
207 x 148.8 x 35.5 mm (WxDxH)

Weight
450 g

Completion
RT-AC66U Dual Band 3x3 802.11AC Gigibit Router
Router stand
RJ-45 cable
Support CD (User manual and utility software)
Power adapter
Quick start guide
Warranty card

Router Special Features
3G / 4G data sharing AiCloud Printer server Download Master Multiple SSIDs Parental Control.
Information:
Ways to reset settings and clean up NVRAM
Method number 1
1. Disable the router.
2. ClampWPSand without lowering we include a router.
3. Hold downWPSwithin 10-15 seconds.
4. We are waiting for the full load of the router.

Method number 2
1. Go to the WEB interface of the router (IP address192.168.1.1)
2. Next, go to the tabAdministration - System.
3. Put a tick in against - EnableTelnet. After -To apply.
4. Using the utilityPuTTY(download) go to the router interface.
5. To do this, in the program itself, on the main screen, tick theTelnet.
6. Enter the address of the IP address192.168.1.1, then click onOpen.
7. After the window appearsCMDwhere you need to enter your username and password to access the router.
8. Then we enter the command -mtd-erase -d nvram- and after the end of the operation the commandreboot.
9. We are waiting for the full load of the router.

Recovery firmware

WEB interface test screen

Types of firmware
Asuswrt- official (or stock) firmware from ASUS. Take in advance and version for older, in case of rollback.

Asuswrt-merlin- Project by Eric Sovazho (RMerlin). The goal of the project is to fix the jambs of the factory firmware, a number of small tweaks and a very limited addition of new functionality. The firmware will always be kept as close as possible to the factory one and will never become overgrown with a mountain of new features. Due to the fact that Merlin is in contact with ASUS, some of his fixes sometimes become part of the factory firmware.

Merlin fork- This is a branch from asuswrt-merlin two years ago. John Bacho's goal is to keep the last version of the firmware afloat with “loud” Wi-Fi drivers. Let me remind you that starting with .376, ASUS, at the request of the FCC, limited the power of the Wi-Fi transmitter to legislative norms and blocked the possibility of changing the region. From the new firmware, John takes only security fixes.

Hugo gomes firmware- another branch from asuwrt-merlin. Hugo Gomez also set himself the task of bypassing regional locks, but he still refused to open his code, allegedly closed his project under pressure from public criticism, but in reality leads further. In addition, Hugo updated the minidlna, dnsmasq, dropbear and other (about 80) firmware components of the firmware to the latest versions in the firmware. At the time of publication of the article, Hugo did hide his repository :(

Tomato firmwareorTomatoUSB- TomatoUSB collects Michal Rupental (aka Shibby) - a system administrator from Poland.

DD-WRT- free alternative firmware for a number of wireless routers, mainly consumer class, based on BroadCom / Atheros / Xscale / PowerPC chips.

Installing and configuring TomatoUSB

Connect USB flash drive, or external HDD to Asus router

Configuring Asus RT-AC66U

ASUS RT-AC66U Questions and Answers

Wi-Fi Setup and Troubleshooting

IPv6: yesterday, today, tomorrow

Links to information sources

Firmware:
Soft:
*** This software is intended for advanced users ***
Attached fileASUS Firmware Restoration.rar(144.99 KB)
Utility to restore the firmware
Attached fileCFE Editor.rar(571.94 KB)
CFE Editor
Attached fileinSSIDer.rar(12.82 MB)
Utility to find a free Wi-Fi channel
Attached fileJPerf.rar(2.66 MB)
Cross-platform console client-server program
Attached filePuTTY.rar(360.5 KB)
Client for various remote access protocols
Attached fileWinSCP.rar(5.67 MB)
This is a graphical SFTP client (SSH File Transfer Protocol)
Attached fileXSpider.rar(11.47 MB)
Utility for detecting vulnerabilities in network resources


A WARNING!
Everything you do, you do at your own peril and risk! No one
except you, is not responsible for your actions and their consequences!
Therefore, think carefully before you do something.


Topics Curator ramblefish For filling caps write to QMS

Post has been editedAndrewP_1 - 15.02.19, 14:25
turkinsasha
Message#2
01.01.17, 14:23
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 12.10.15

Reputation:-  0  +

People help in general the situation is, there was a TP LINK TL-WR1045ND router, the signal was not bad, but the maximum antenna was not everywhere. Suppose the telly received a signal of 4 sticks out of 5 possible. It helped change the region in the settings from the Russian Federation to the USA everything earned by 5. Then there were many new devices with the ability to receive 5G. I decided to buy RT-AC66U, since TP Link did not distribute 5G, only N! As a result, the telly on 5G became a signal to catch 3 sticks out of 5 possible, the range N 4 sticks out of 5 possible, in general, the N range has the same reception as on TP LINK TL-WR1045ND but with the RF region. 5G is weaker, but I understand that 5G is more attenuated. In the settings in the web face, the power is at maximum speed but the signal is weaker.
The question is such as the region in the asus change or increase the signal power ???
I live in a foreign house, there are no routers in the neighborhood! So the increase in power will not bother anyone. The firmware is the last, updated yesterday. Can change firmware to merlin or something else ??
k1601
Message#3
01.01.17, 14:34
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1368
Check in: 16.11.09
Sony Xperia XZ1 G8341 / G8342

Reputation:-  122  +

Can change firmware to merlin or something else ??

The original firmware from Merlin will not help, it has the same limitations as in the official one. See firmware Merlin fork, hgg and Tomato.
turkinsasha
Message#4
01.01.17, 16:01
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 12.10.15

Reputation:-  0  +

k1601 @ 01.01.17, 14:34*
See firmware Merlin fork, hgg and Tomato.

Are they even stable?
5G does not fall off?
Did you use them?
And where to get them? Is there a hat?
k1601
Message#5
01.01.17, 16:21
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1368
Check in: 16.11.09
Sony Xperia XZ1 G8341 / G8342

Reputation:-  122  +

Are they even stable?
5G does not fall off?
Did you use them?
And where to get them? Is there a hat?

I have a fork, not particularly complaining. Firmware based on the long-standing stable Merlin, where the power has not yet been underestimated, dorobotka conducted only in terms of security patches. But to fully unlock the power, you need to reflash the bootloader (and this is risky and not quite easy). If I don’t change the bootloader, I can’t say how much better it will be, then I have to try. Hgg is also based on Merlin, but with all the latest updates, so it may be less stable. I have not tried it myself (although I’m thinking about it), the people have some problems with the latter by connecting different media equipment (TV and so on) to the common resources, but not everyone.
About tomato in general, I know very little, this is a separate topic.
Take - search for the idea. Only Hgg is sent by the author after the letter to him personally, since he does not officially distribute for his own reasons.

Post has been editedramblefish - 27.05.17, 04:33
ky
Message#6
01.01.17, 20:37
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 304
Check in: 11.10.05

Reputation:-  18  +

* turkinsasha, flashed hgg not so long ago. It works stably. The signal is excellent, nothing falls off. Definitely better runoff. Recommend
turkinsasha
Message#7
01.01.17, 22:40
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 12.10.15

Reputation:-  0  +

And how to flash on merlin fork it does not work out the router says something like you have a newer firmware and they say you can not roll back!
fatspirit
Message#8
01.01.17, 23:01
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6042
Check in: 05.01.10
LG G6

Reputation:-  493  +

* turkinsasha,asus firmware restoration utility


--------------------
fat spirit of little spaceman / lg g6 [ds / ame] / syno ds413j
LinXP
Message#9
02.01.17, 01:07
Engineer
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 2285
Check in: 06.09.06
Lenovo A706

Reputation:-  1038  +

* k1601,
removed cfe from his (merlin 380.57) ..
cfe (txt)
boardtype = 0xF5B2
boardnum = 00
boardrev = 0x1100
boardflags = 0x00000110
boardflags2 = 0x00000000
sromrev = 8
clkfreq = 600,300,150
xtalfreq = 25000
et0phyaddr = 30
et0mdcport = 0
et0macaddr = (deleted)
vlan1ports = 1 2 3 4 8 *
vlan1hwname = et0
vlan2ports = 0 8u
vlan2hwname = et0
landevs = vlan1 wl0 wl1
wandevs = et0
lan_ipaddr = (deleted)
lan_netmask = (deleted)
gpio4 = wps_button
boot_wait = on
gpio7 = robo_reset
watchdog = 3000
pci / 1/1 / venid = 0x14E4
pci / 1/1 / boardvendor = 0x14E4
pci / 1/1 / sromrev = 9
pci / 1/1 / boardflags = 0x00003200
pci / 1/1 / boardflags2 = 0x00100000
pci / 1/1 / devid = 0x4332
pci / 1/1 / macaddr = (deleted)
pci / 1/1 / aa2g = 7
pci / 1/1 / ag0 = 0
pci / 1/1 / ag1 = 0
pci / 1/1 / ag2 = 0
pci / 1/1 / txchain = 7
pci / 1/1 / rxchain = 7
pci / 1/1 / antswitch = 0
pci / 1/1 / tssipos2g = 1
pci / 1/1 / extpagain2g = 3
pci / 1/1 / pdetrange2g = 0
pci / 1/1 / triso2g = 3
pci / 1/1 / antswctl2g = 0
pci / 1/1 / elna2g = 0
pci / 1/1 / maxp2ga0 = 0x64
pci / 1/1 / pa2gw0a0 = 0xFE74
pci / 1/1 / pa2gw1a0 = 0x1A2D
pci / 1/1 / pa2gw2a0 = 0xF999
pci / 1/1 / maxp2ga1 = 0x64
pci / 1/1 / pa2gw0a1 = 0xFE85
pci / 1/1 / pa2gw1a1 = 0x1C2D
pci / 1/1 / pa2gw2a1 = 0xF924
pci / 1/1 / maxp2ga2 = 0x64
pci / 1/1 / pa2gw0a2 = 0xFE75
pci / 1/1 / pa2gw1a2 = 0x1971
pci / 1/1 / pa2gw2a2 = 0xF9C8
pci / 1/1 / cckbw202gpo = 0x1111
pci / 1/1 / cckbw20ul2gpo = 0x1111
pci / 1/1 / legofdmbw202gpo = 0x74111111
pci / 1/1 / legofdmbw20ul2gpo = 0x74111111
pci / 1/1 / mcsbw202gpo = 0xDA741111
pci / 1/1 / mcsbw20ul2gpo = 0xDA741111
pci / 1/1 / mcsbw402gpo = 0xFC963333
pci / 1/1 / mcs32po = 0x9999
pci / 1/1 / legofdm40duppo = 0x4444
pci / 1/1 / parefldovoltage = 35
pci / 1/1 / ccode = US
pci / 1/1 / ledbh0 = 2
pci / 1/1 / ledbh1 = 5
pci / 1/1 / ledbh2 = 4
pci / 1/1 / ledbh3 = 11
pci / 1/1 / ledbh12 = 7
pci / 1/1 / leddc = 0xFFFF
pci / 1/1 / temps_period = 5
pci / 1/1 / tempthresh = 120
pci / 1/1 / temps_hysteresis = 5
pci / 1/1 / phycal_tempdelta = 0
pci / 1/1 / tempoffset = 0
pci / 1/1 / ATE_Brand = ASUSTek
pci / 2/1 / boardrev = 0x1305
pci / 2/1 / boardflags = 0x10000000
pci / 2/1 / boardflags2 = 0x00300002
pci / 2/1 / boardflags3 = 0x0
pci / 2/1 / boardnum = 21059
pci / 2/1 / boardtype = 0x621
pci / 2/1 / boardvendor = 0x14e4
pci / 2/1 / devid = 0x43a2
pci / 2/1 / venid = 0x14e4
pci / 2/1 / macaddr = (deleted)
pci / 2/1 / ccode = US
pci / 2/1 / rxgains5gtrelnabypa0 = 1
pci / 2/1 / rxgains5gtrelnabypa1 = 1
pci / 2/1 / rxgains5gtrelnabypa2 = 1
pci / 2/1 / rxgains5gtrisoa0 = 7
pci / 2/1 / rxgains5gtrisoa1 = 6
pci / 2/1 / rxgains5gtrisoa2 = 5
pci / 2/1 / rxgains5gelnagaina0 = 1
pci / 2/1 / rxgains5gelnagaina2 = 1
pci / 2/1 / rxgains5gelnagaina1 = 1
pci / 2/1 / pa5ga0 = 0xff39,0x1a55,0xfcc7,0xff38,0x1a7f, 0xfcc3,0xff33,0x1a66,0xfcc4,0xff36,0x1a7b, 0xfcc2
pci / 2/1 / pa5ga1 = 0xff3a, 0x1b0b, 0xfcba, 0xff38,0x1b37,0xfcb4,0xff37,0x1aa1,0xfcc0,0xff37,0x1aef, 0xfcb7
pci / 2/1 / pa5ga2 = 0xff3a, 0x1b28,0xfcb4,0xff38,0x1aaa, 0xfcc2,0xff35,0x1a93,0xfcc1,0xff38,0x1aab, 0xfcbe
pci / 2/1 / maxp5ga0 = 100,100,100,100
pci / 2/1 / maxp5ga1 = 100,100,100,100
pci / 2/1 / maxp5ga2 = 100,100,100,100
pci / 2/1 / mcsbw205glpo = 0x99753333
pci / 2/1 / mcsbw405glpo = 0x99975333
pci / 2/1 / mcsbw805glpo = 0x99975333
pci / 2/1 / mcsbw1605glpo = 0
pci / 2/1 / mcsbw205gmpo = 0x99753333
pci / 2/1 / mcsbw405gmpo = 0x99975333
pci / 2/1 / mcsbw805gmpo = 0x99975333
pci / 2/1 / mcsbw1605gmpo = 0
pci / 2/1 / mcsbw205ghpo = 0x99753333
pci / 2/1 / mcsbw405ghpo = 0x99975333
pci / 2/1 / mcsbw805ghpo = 0x99975333
pci / 2/1 / mcsbw1605ghpo = 0
pci / 2/1 / mcslr5glpo = 0
pci / 2/1 / mcslr5gmpo = 0
pci / 2/1 / mcslr5ghpo = 0
pci / 2/1 / sb20in40hrrpo = 0
pci / 2/1 / sb20in80and160lr5glpo = 0
pci / 2/1 / sb40and80hr5glpo = 0
pci / 2/1 / sb20in80and160hr5gmpo = 0
pci / 2/1 / sb40and80hr5gmpo = 0
pci / 2/1 / sb20in80and160hr5ghpo = 0
pci / 2/1 / sb40and80hr5ghpo = 0
pci / 2/1 / sb20in40lrpo = 0
pci / 2/1 / sb20in80and160hr5glpo = 0
pci / 2/1 / sb40and80lr5glpo = 0
pci / 2/1 / sb20in80and160lr5gmpo = 0
pci / 2/1 / sb40and80lr5gmpo = 0
pci / 2/1 / sb20in80and160lr5ghpo = 0
pci / 2/1 / sb40and80lr5ghpo = 0
pci / 2/1 / dot11agduphrpo = 0
pci / 2/1 / dot11agduplrpo = 0
regulation_domain = EU
regulation_domain_5G = EU
secret_code = (deleted)
hw_version = 1.5
bl_version = 1.0.1.4
bootflags = 1
ntype = 0
serial_no = (removed)
odmpid = ASUS
model = RT-AC66U
wait_time = 3
pci / 1/1 / regrev = 13
pci / 2/1 / regrev = 13

and not aware of how to look at the current power?
k1601
Message#10
02.01.17, 01:55
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1368
Check in: 16.11.09
Sony Xperia XZ1 G8341 / G8342

Reputation:-  122  +

LinXP @ 02.01.17, 01:07*
and not aware of how to look at the current power?

Power depends on several parameters, I don’t remember everything exactly + the limitations of the drivers wired into the firmware.
You can view the current values ​​of the parameters with the command:
nvram show | grep -E 'maxp2ga [0-9] | maxp5ga [0-9] | wl [0-9] _TxPower' | sort

On some models, there are still some txpwr_target_max and txpwrlimit (in my opinion, we don’t have it, but I don’t remember again)

Here is an excerpt from one of my links above:
# AC68U - 500 mW Output:
#
# Default: 106 = 25 dBm (316 mW)
#
# Highest setting is 120 = 28.50 dBm (708 mW)
#
# “Wl txpwr_target_max” Shows the current output power in dBm.
#
# 4 = 1 dBm (1.3 mW) / 114 = 27 dBm (500 mW)
LinXP
Message#11
02.01.17, 02:06
Engineer
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 2285
Check in: 06.09.06
Lenovo A706

Reputation:-  1038  +

* k1601,

exhaust
admin @ RT-AC66U: / tmp / home / root # nvram show | grep -E 'maxp2ga [0-9] | maxp5ga [0-9] | wl [0-9] _txpower' | sort
size: 53501 bytes (12035 left)
pci / 1/1 / maxp2ga0 = 0x64
pci / 1/1 / maxp2ga1 = 0x64
pci / 1/1 / maxp2ga2 = 0x64
pci / 2/1 / maxp2ga0 = 76
pci / 2/1 / maxp2ga1 = 76
pci / 2/1 / maxp2ga2 = 76
pci / 2/1 / maxp5ga0 = 100,100,100,100
pci / 2/1 / maxp5ga1 = 100,100,100,100
pci / 2/1 / maxp5ga2 = 100,100,100,100
wl0_txpower = 100
wl1_txpower = 100


0x64 I understand it is 100qdBm, then 20dBm, and the rest is not up to date?
maxp2ga2 = 76 (is it already in qdBm? that is, 18.81dBm)

Post has been editedLinXP - 02.01.17, 08:47
lac5
Message#12
02.01.17, 07:29
Novice
***
[offline]

Group: Active users
Messages 40
Check in: 21.11.11
Xiaomi Redmi Note 3 Standard Edition

Reputation:-  0  +

Iguana78 @ 12/31/16, 10:56 PM*
lac5,
and what are your connection types to an Internet?

PPPoE
k1601
Message#13
02.01.17, 10:33
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1368
Check in: 16.11.09
Sony Xperia XZ1 G8341 / G8342

Reputation:-  122  +

LinXP @ 02.01.17, 02:06*
maxp2ga2 = 76 (is it already in qdBm? that is, 18.81dBm)

Well, yes, 0x64 is 100 in the 16th form. Why somewhere in the decimal, something in hexadecimal - I did not find.
It looks like qdBm. And txpower is in mW.

120 = 28.50 dBm (708 mW)
106 = 25 dBm (316 mW)
94 = 22 dBm (159 mW)
82 = 19 dBm (79 mW)
rahimov_1
Message#14
03.01.17, 14:10
Visitor
**
[offline]

Group: Active users
Messages 20
Check in: 12.10.12
Xiaomi Mi Max Pro

Reputation:-  0  +

Good day.
Who did not encounter a problem in the native firmware, when in the dhcp settings I can only assign 9 device names?
Those. I want each device to assign its name, and it turns out to assign only 9 devices. The tenth, eleventh and further devices remain with the name "New device". This is not very convenient in further settings.

Can someone in the know how to assign names to all devices prescribed in dhcp, even if there are 20 of them?
Attached Image
STNVIDNOYE
Message#15
04.01.17, 13:42
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 122
Check in: 15.11.05

Reputation:-  4  +

I have about 20 devices registered, there are no problems with the names. Firmware used always from Merlin, now from Hugo.
I think it makes sense to do a full reset and after restoring the firmware reconfigure everything manually, without restoring settings from backup
rahimov_1
Message#16
04.01.17, 14:13
Visitor
**
[offline]

Group: Active users
Messages 20
Check in: 12.10.12
Xiaomi Mi Max Pro

Reputation:-  0  +

Strangely, the device "only from the store", connected the external cable, he asked for an update - updated and started to configure everything from scratch.
I will try with a complete reset and reset. If the official does not work, you will have to sew custom.
STNVIDNOYE, please share a reference to the firmware from Hugo. He has an interface in Russian by the way, as he is not very friendly with enemy languages.
Thank.
Band
Message#17
05.01.17, 16:50
Novice
***
[offline]

Group: Active users
Messages 39
Check in: 03.12.07
Asus p535

Reputation:-  0  +

Has anyone encountered a problem - every 5-15 minutes, drops the connection by cable?
Wi-fi does not reset - the wi-fi Internet does not disappear.
At the same time, the old d-link at the same place works without cliffs.
I changed the firmware - I updated my own, put fresh from merlin. I also reset the settings between them.
Regardless of the firmware - 5-15 minutes and reset the connection.
Then the computer automatically reconnects and the next 5-15 minutes there is a connection.
Idle time (reconnection) 15-17 sec.
The intervals are different each time.
Is it with iron?
fatspirit
Message#18
05.01.17, 17:31
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6042
Check in: 05.01.10
LG G6

Reputation:-  493  +

* Band,to the computer goes gigabit?


--------------------
fat spirit of little spaceman / lg g6 [ds / ame] / syno ds413j
Band
Message#19
05.01.17, 18:05
Novice
***
[offline]

Group: Active users
Messages 39
Check in: 03.12.07
Asus p535

Reputation:-  0  +

fatspirit, probably - and how to look at it?
Band
Message#20
05.01.17, 18:18
Novice
***
[offline]

Group: Active users
Messages 39
Check in: 03.12.07
Asus p535

Reputation:-  0  +

I switched the cable from lan1 to lan4 and disconnected the second cable from lan2 (to the second computer - but it is turned off).
The router thought for 35 minutes and dropped the connection.
After that, I dropped it after 18 minutes, then after 2 minutes, then after 4 minutes, and now the 32nd minute is without a reset.
Before that I tried to assign an IP address manually. Does not affect.

upd - dropped the connection at 38 minutes.

Post has been editedBand - 05.01.17, 18:35
fatspirit
Message#21
05.01.17, 19:15
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6042
Check in: 05.01.10
LG G6

Reputation:-  493  +

* Band,need what's in the Speed ​​line:
Attached Image


--------------------
fat spirit of little spaceman / lg g6 [ds / ame] / syno ds413j
Asus
 

240 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19, 09:23