> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


92 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> MTS SMART Sprint - Firmware (OS 4.4.2)
AleksandrN1
Message#1
16.01.15, 18:04
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

MTS SMART Sprint - Firmware (OS 4.4.2)
PictureMTS Smart Sprint
Description | Discussion � | Firmware � | Camera talk »

Drivers and Utilities

Official firmware
off 1.1.8
Attention!!!For firmware, you need 40% of the battery charge, in rare cases, there is a bootlap or flasher that fails to flash the device.
If this is your first time flashing your FT smartphone, then look at the spoiler "Instructions"

V1.0.7 With a kernel to replace memory andSuperSU
V1.0.7 With memory re-layout and useful software
V1.1.5 (backup TWRP)
Backup firmware stock for twrp

OTA updates

Unofficial firmware

ROOT, Recovery, backup

Instructions
Instructions on firmware
1. Unpack the firmware in a convenient place.
2. Run FT
3. Connect the device without battery
4. Click on "Options" and select "USB mode"
5. Click on "Scatter-loading"
6. Go to the folder with the firmware and select the ".txt" file
7. Click on "Download"
8. At the end of the firmware, a green bagel will pop out.
9. Turn off the phone

Anyone who has infinitely MTS-logo!
Instructions for making a backup, the restoration of the "brick" firmware
Remapping memory for MTS Smart Sprint
Porting firmware to devices with MTK6572 processor
Turn off unused frequencies

miscellanea


There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links or throughQMSto the author of the topic.


Post has been editedvaalf - 21.09.17, 21:29
Reason for editing: Backup firmware stock for twrp
hanuma50
Message#2
24.11.14, 22:21
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2957
Check in: 30.10.12
Huawei P20 Lite ANE-LX1

Reputation:-  1975  +

TWRP Recovery 2.8.1.0 download


Screen TWRP
Attached Image

Installing Recovery with the Flash Tool
1. After installing Recovery, go into it and click "Reboot">"System"
Recovery will offer to install SuperSU, We agree
(Root received)

Download TWRP Attached fileTWRP_Recovery_2810.rar(5.9 MB)


Carliv Touch Recovery v2.5 (CWM 6.0.4.4) (NVRAM backup)
Backup NVRAM
Added menu "NVRAM backup / restore" in the section "Carliv"
A backup will be created in the ClockworkMod / backup folder as nvram.img.
This will help if you lose IMEI and other communication features.

CTR screenshots
Attached Image
Attached Image
Attached Image

Installing Recovery with the Flash Tool Attached fileFirmware Recovery.pdf(321.07 KB)

Download CTR Attached fileCTR_Recovery_V2.5.rar(4.74 MB)

100% ROOT, Install archive from CWM / TWRP Recovery HERE

Flash tool V3.1344 HERE
MTK drivers HERE

QMS Questions


Post has been editedhanuma50 - 03.04.15, 21:57
Reason for editing: Replaced Flash Tool and Native scatter.txt
picabiv
Message#3
26.11.14, 18:52
have been sitting here for a long time ..
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 416
Check in: 30.10.05
Pocophone F1 6/64

Reputation:-  16  +

The USB flash drive is not flashing, the modified one (without this error) cannot be touched - right away the kerpich

So, everything turned out.
Here is the backup of the firmware with the nested mode of recovery
https://cloud.mail.ru/…5a562/SMART-Sprint.zip

Here's a program that sewshttp: //savagemessiahzine.com/forum/d..lMod+fly-droid.org.zip

then just go into the recovery and when you exit, she will offer to install the root

There is no system.img in this backup, so it is not suitable for restoring it.
In the archive, all boot sections + mod rekoveri and scatter
The program is free from error 8038 and sews regardless of partition markup.
It is necessary to flash all partitions from backup except drain rekoveri (replacing it with a mod)

MUST HAVE YOUR OWN BEKAP OF THESE SECTIONS WITH MARK !!!

Post has been editedpicabiv - 05.12.14, 16:19


--------------------
OSX86:
mother ASUS P8B75-V
percent Intel Xeon e3-1270
Gigabyte ATi HD7850 GV-R785OC-2GD video
Sacks
Message#4
01.12.14, 19:48
Visitor
**
[offline]

Group: Active users
Messages 28
Check in: 31.08.10
Explay HD Quad

Reputation:-  1  +

* zmei.,

Here ishereMy backup, made as soon as they installed CWM.
axell2580
Message#5
04.12.14, 23:20
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 183
Check in: 19.03.07
Samsung Galaxy Note8 SM-N950F / DS

Reputation:-  31  +

How to backup:
-- DownloadingdriversandSP Flash Toolor modifiedSP Flash Tool Modif the original SP Flash Tool gives an error.
-- DownloadingMTK Droid Tools.
-- Install the driver, connect the phone in MTP mode (media device) to the computer. Must stand dawUSB debuggingin settings. If not all drivers are installed, then we put the missing ones.
-- We launch MTK Droid Tools, the program should see the smart, if not seen, then we check the drivers again (the program works fine with the included smartphone).
-- Click on the button that saysBlock map ->Create scatter filethen in the folder with MTK Droid Tools create the file MT6572_Android_scatter.txt, do not close the program, we will need it later.
-- Run the SP Flash Tool, click on the buttonscatter-loadingand select the file we created earlier, MT6572_Android_scatter.txt.
-- Next, go to the tabReadbackand clickAdd, double click on the block, save, a window will openReadback block start address. Do not close it! Next, open the MT6572_Android_scatter.txt file with a regular notepad (I recommend Notepad ++) and find the partition_name: CACHE block, copy the value from the linear_start_addr: field and paste it into the second field of the window and click OK.
-- Disconnect the phone from the computer. Turn off and remove the battery. Push the buttonReadbackin the Flash Tool and connect the phone off. After connecting, a red bar will run quickly right away, then a blue one, wait for completion ... (OK green box), after you finish you will create a file in the folder with the SP Flash Tool called ROM_.
-- Go to the unclosed window MTK Droid Tools. In the program tabroot, backup, recoverypush the buttonCreate backup from ROM flashand select the saved ROM_, do not pay attention to 2 errors in the report.
-- All backup firmware created. It is in the folderMtkDroidTools_253 \ backups \ SMART-Sprint _ ****** _ ForFlashtoolFromReadBack _ ****** - ******

How to restore the phone after unsuccessful experiments:
-- Open upSP_Flash_Tool
-- Go to the tabDownload, check what is in the "Download only" mode.
-- Click onScatter-loadingand point to the fileMT6572_Android_scatter.txt
-- In the last columnLocationsoppositeUBOOT, Booting, RECOVERY, ANDROIDclick and point to the corresponding files that are in the folderMtkDroidTools_253 \ backups \ SMART-Sprint _ ****** _ ForFlashtoolFromReadBack _ ****** - ******:
UBOOT - uboot.bin (not sure whether you need it, but just in case I also requested it)
BOOTING - boot.img (not sure if you need it, but just in case I also flashed it)
RECOVERY - factory_NONmodified_recovery.img (restore the original recovery) or recovery.img from the archiveTWRP_Recovery_2810.rarif you want TWRP recovery.
ANDROID - system.img (the firmware file itself)
-- Push buttonDownloadat the top.
-- Turn off the phone, remove the battery, connect the phone without the battery to the computer with a wire.
-- If all the drivers have been previously installed, the download bar will run down below.
-- Upon completion, a green window will come outOK. All, you can disconnect the wire and turn on the phone.

How to flash custom recovery and get root-rights:
-- Open upSP_Flash_Tool
-- Go to the tabDownload, check what is in the "Download only" mode.
-- Click onScatter-loadingand point to the fileMT6572_Android_scatter.txt
-- In the last columnLocationsoppositeRECOVERY, click and point to the file recovery.img from the archiveTWRP_Recovery_2810.rar.
-- Push buttonDownloadat the top.
-- Turn off the phone, remove the battery, connect the phone without the battery to the computer with a wire.
-- If all the drivers have been previously installed, the download bar will run down below.
-- Upon completion, a green window will come outOK. Everything, it is possible to disconnect a wire.
-- We go in TWRP recovery - on the phone off we hold 2 buttons:volume +andOnbefore the appearance of the logo and release. TWRP recovery will be loaded. There's a button on the menuRebootthenSystemAnd you will install SuperSU (root-rights).

How to restore the phone "brick" (ie, it does not turn on at all, the screen does not light up):
-- Open upSP Flash Tool Mod, the original did not work, gave the error "S_FT_ENABLE_DRAM_FAIL (4032)", so we take a mod.version.
-- Go to the tabDownload.
-- Click onScatter-loadingand point to the fileMT6572_Android_scatter.txt
-- In the last columnLocationsoppositePRELOADERclick and point to the filepreloader.binwhich are in the folderMtkDroidTools_253 \ backups \ SMART-Sprint _ ****** _ ForFlashtoolFromReadBack _ ****** - ******The rest of the checkboxes are removed so that only one remains - the preloader.
-- Push buttonDownloadat the top.
-- Turn off the phone, remove the battery, connect the phone without the battery to the computer with a wire.
-- If all the drivers were previously installed, then at the bottom, first a strip will quickly run through, and then the second (file download). If the second does not go, see if all the drivers are installed, reinstall.
-- Upon completion, a green window will come outOK. All, you can disconnect the wire and turn on the phone.

Post has been editedaxell2580 - 19.06.15, 13:35
Reason for editing: Added brick restoration instructions
ruBorS
Message#6
05.01.15, 03:48
Visitor
**
[offline]

Group: Active users
Messages 27
Check in: 30.08.13
PiPO S1

Reputation:-  6  +

Remapping memory for MTS Smart Sprint

Everything that we do with our device - we do at our own peril and risk - everything works for me, I am not responsible for other people's phones

The goal of memory re-allocation has become the needin increasing memoryfor the installation of large-volume applications.

As a result of re-marking the memory of MTS, Smart Sprint got the following result:
1. Int. memory is a section of USRDATA - part of the flash memory of the smartphone (for noFATmod - 2.42 GB).
2. The phone's memory is an external SD card that we insert into the smartphone (exactly as much as it was inserted. The SD card is a must-have :)).
3. The SD card is a FAT partition — part of the flash memory of the smartphone (for noFATmod, 0 b). In order not to mount an empty SD card - corrected boot_noFATmod.img.
In section"Memory" in MTS Smart Sprint it looks like this:
Screenshots
Attached Image
Attached Image

And connect an empty SD-card is no longer possible :).

After redevelopment, the modified memory structure becomes native for the re-sized device:
MtkDroidTools (v2.5.3) ->Block info
Attached Image


The sequence of actions for memory re-marking:
1. You need root, and you need to make sure that MtkDroidTools (v2.5.3) manages to get a temporary root.

2. Make a full backup of your firmware using MtkDroidTools (v2.5.3) (as a result of the flashing of the device, the current state of the smartphone should be fully preserved). And prepare in MtkDroidTools (v2.5.3) a backup for firmware via the SP Flash Tool (v5.1420.03).

3. Sure to! To restore IMEI at the end of a crashed - do in MtkDroidTools (v2.5.3) backup IMEI / NVRAM: tab "Information about the phone" ->"IMEI / NVRAM" ->backup

4. In order for the data not to be gone - we transfer all data from the internal SD card (the one that is physically part of the flash memory of the smartphone and will be formatted and re-allocated) to the external SD card (as a result of the device’s flashing, the current state of the smartphone must be fully preserved).

5. Download the modified scanner, markup files and bootloader:Attached filenoFATmod.zip(4.02 MB)


6. Prepare an assembly from the backup of its firmware and modified scanner, memory markup files and bootloader for firmware via the SP Flash Tool (v5.1420.03). You can immediately change and Recovery.
Download the scanner to the SP Flash Tool (v5.1420.03), as a result, on the tab"Download" it turns out something like this:
SP Flash Tool (v5.1420.03). Files prepared for the firmware
Attached Image

Here is the scanner, as well as the files for downloading to the MBR, EBR1, BOOTIMG sections modified from the archive in p.5, the rest of the files from the backup + Recovery are the one that is more like.

7. Go to the SP Flash Tool (v5.1420.03) tab"Format" and format flash smartphone like this:
SP Flash Tool (v5.1420.03). Formatting the memory of the smartphone
Attached Image

In no case can not format the section "BOOTLOADER" - on the tab "Download" is the section "PRELOADER".
This is the bootloader and flash memory flash of the smartphone, physically located at the beginning of the flash memory of the smartphone.
Without special need, you should never reflash BOOTLOADER / PRELOADER - it can be either "broken" or "not native" and then you get a full brick.

Push"Start" We connect the smartphone to the PC, after formatting we disconnect from the PC.

8. Go to the SP Flash Tool (v5.1420.03) tab"Download" (photo on item 6). Push "Download" , we connect the smartphone to the PC, wait for the download, disconnect from the PC. Reboot and ... until we rejoice.

9. Download MtkDroidTools (v2.5.3), get a temporary root and restore your IMEI / NVRAM: tab "Information about the phone" ->"IMEI / NVRAM" ->Restore (ask for two files, first an image, then an archive). Reboot and enjoy: D.

10. Save the modified scanner, MBR_noFATmod, EBR1_noFATmod, boot_noFATmod.img from the archive of step 5 - now they are native to your smartphone. Further modified, MBR_noFATmod, EBR1_noFATmod, boot_noFATmod.img, if necessary, flashing these sections when flashing, the scanner can be obtained from the smartphone using MtkDroidTools (v2.5.3) ->tab "Information about the phone" ->scatter from firmware.info.

Ps. For MtkDroidTools and SP Flash Tool in brackets are the versions of software that are used.
AleksandrN1
Message#7
07.01.15, 19:38
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69    +

CWM Status

CWM STATUS. DECRYPTING CWM ERROR CODES

CWM Status 6 this error code arose due to the fact that the updater-scpript file cannot
be read since it was not created in Unix format and Android OS cannot install
this update.
Solution of Status 6 error: Download and install the program on NotePad PC
++ and change the format to Unix and re-save the updater-scpript file.

CWM Status 7 This error code arose due to the fact that this firmware or archive
update is not compatible with your Android device, it is recommended that you carefully
double-check whether you are mistaken (maybe firmware on another smartphone or
the tablet)!
The solution to the error Status 7: If you are sure that there is no error and the device
truly compatible with the firmware or archive-update, then open on
PC program NotePad ++ and delete the lines with models at the beginning

CWM Status 0 This error code occurred due to the fact that the file update-scpript or
update-binary is missing from the firmware or update file.
Solution of Status 0 error: Add these files to the archive-update either
replace update-binary with another update-binary file.

CWM Status 255 This error code arose due to the fact that the update-binary file is not
fits
Status 255 error resolution: Replace update-binary with another update- file
binary.

CWM Status 1 This error code was caused by the wrong paths.
mount partitions.
Solution of the Status 1 error: check with the command in the mount terminal and
fix updater-scpript.


Post has been editedAleksandrN1 - 07.01.15, 19:40
AleksandrN1
Message#8
10.01.15, 19:35
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

Backup IMEI / NVRAM
Installation:
1. Unpack right into the root of SDKarta
2. Start TWRP
3. Choose Restore
4. Choose "backup nvram mts"
5. Draw a blue circle to the right
6. Click Reboot System

Download: Attached fileTWRP.zip (17.26 KB)


Post has been editedAleksandrN1 - 10.01.15, 19:36
vredniiy
Message#9
17.01.15, 16:08
Zhuikoved
*********
[offline]

Group: Honorary Gameday
Messages 3907
Check in: 29.10.11
Xiaomi Redmi Note 3 Pro Standard

Reputation:-  1676  +

M
We move to a subsection.
Fruitful communication!


Post has been editeda - x93-07 - 17.01.15, 23:20
Nikolaha53rus
Message#10
18.01.15, 08:39
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 350
Check in: 07.12.13
Cubot manito

Reputation:-  20  +

And where to get the firmware M536-MTC-RU-QB18S-EMMC-6572KKV1.1.2 or M536-MTC-RU-QB18S-EMMC-6572KKV1.1.5? Have people updated. Throw off please.
AleksandrN1
Message#11
18.01.15, 10:10
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

I can not backup. I did not have an update.
Apparently we bad people.

Post has been editedAleksandrN1 - 18.01.15, 10:11
CEDbMOY
Message#12
18.01.15, 10:41
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 205
Check in: 22.10.13

Reputation:-  19  +

Is the firmware in the topic already with re-partitioning and a corrected external flash drive?

Post has been editedCEDbMOY - 18.01.15, 10:41
AleksandrN1
Message#13
18.01.15, 11:41
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

Disable unused frequencies to save battery
Open the "Engineering menu" (* # * # 3646633 # * # *), find and select the item "BandMode", there will be the item "SIM1". You need to enter this item, and remove the checkmarks from the items "GSM850" and "PCS1900", then press the "SET" button.


Post has been editedAleksandrN1 - 18.01.15, 11:43
Nikolaha53rus
Message#14
18.01.15, 12:05
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 350
Check in: 07.12.13
Cubot manito

Reputation:-  20  +

To enter the engineering menu, you can use the program Mobileuncle Tools. In it, you can change the speaker's speaker volume, tests and GPS settings, IMEI backup and many, many things. Root required

Post has been editedNikolaha53rus - 18.01.15, 12:07
DJM.A.X2018
Message#15
18.01.15, 18:40
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1645
Check in: 11.05.12
Google nexus 5

Reputation:-  118  +

And where to get the firmware M536-MTC-RU-QB18S-EMMC-6572KKV1.1.2 or M536-MTC-RU-QB18S-EMMC-6572KKV1.1.5? Have people updated. Throw off please.

Remove root or build standard firmware or wipe and upgrade
P.S. I would put standard firmware on your place


--------------------
Google Nexus 5 D820
[ROM] AEX v6.4 (9) | [Kernel]stock rom |[TWRP] 3.3.0-0 | [Root] MAGISK 18.1
mazix
Message#16
19.01.15, 00:37
Novice
***
[online]

Group: Active users
Messages 41
Check in: 22.06.13
Google Nexus 7 LTE (2013)

Reputation:-  1  +

Who has the update, share. You can fill in for example on the disk and post a link here.
martossiti
Message#17
19.01.15, 09:25
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 472
Check in: 16.02.14

Reputation:-  12  +

And I received an update, the size of the written null and disappeared
ra3vgv
Message#18
19.01.15, 12:22
Novice
***
[offline]

Group: Active users
Messages 47
Check in: 15.10.08

Reputation:-  0  +

Guys, my phone says "enter the PIN code of theft protection". I stitched the firmware from the cap, nothing has changed, I did the dumps, it also does not help. How to overcome it?
AleksandrN1
Message#19
19.01.15, 12:31
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

Guys, my phone says "enter the PIN code of theft protection". I stitched the firmware from the cap, nothing has changed, I did the dumps, it also does not help. How to overcome it?

Format system and data, then flash the firmware from the header
ra3vgv
Message#20
19.01.15, 12:33
Novice
***
[offline]

Group: Active users
Messages 47
Check in: 15.10.08

Reputation:-  0  +

It did just that, it does not help.
AleksandrN1
Message#21
19.01.15, 14:25
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 504
Check in: 26.02.14
Huawei P Smart FIG-LX1

Reputation:-  69  +

It did just that, it does not help.

"google"
Mts
 

92 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/29/19 10:59