flashing and updating the Nokia X2DS phone with the Nokia Care Suite program
(
The author is not I copied from the site allnokia.ru corrected for our phone )
As usual, you should understand that all the manipulations you do at your own peril and risk that neither I, as the author, nor our website (
savagemessiahzine.com ) do not bear any responsibility for possible damage caused to the device, etc. Remember this! If you are ready to take a risk, continue to read the article, no - we go on a walk on our site.
Let's start directly to update / restore the smartphone. For this we need:
1) the firmware itself (look into the cap)
2) and the Nokia Care Suite program (look in the header)
At this time, we will prepare for the firmware, launch the Nokia Care Suite installation (if not already installed) and install the program. Next, we need to create a folder where we will then upload the downloaded firmware. Create the following folder:
include showing hidden folders
c: \ ProgramData \ Nokia \ Packages \ Products \ rm-1013
Nokia Care Suite may not have it yet.
Folder created, firmware downloaded. Download the downloaded firmware files to the created folder and launch Nokia Care Suite and select the item "Product Support Tool", the phone should not be connected to the PC.
After launching the Product Support Tool, you will be prompted to enter a login and password, which you most likely will not have. Therefore, click the "Work offline" button.
Next in the window that opens, we need to remove, if it is, the checkbox "Automatic product selection".
Next, go to
File "Open Product.
In the window that appears, enter our type, for Nokia X2 this is RM-1013, then press the "Open" button. Almost everything is ready, there are a few items left. In the lower left corner of the program, click the "Programming" item and in the drop-down menu select "Recovery".
In the window that appears, click the "Start" button, I remind you, the phone must be disconnected from the PC.
The program will start thinking and then it will display a window where retry Cancel will be written.
There, in fact, it says what needs to be done. But I repeat: turn off our phone (for whom it was turned on, for whom it was not turned on - we distort the battery), then press and hold the volume down keys and the power button, release the power button after the vibration, and after 10-15 seconds release the volume key ( the display will show NOKIA). Next, connect our smartphone to the PC and click the "Retry" button. If everything is fine, the program will start flashing the smartphone,
Sometimes the program may produce errors, for example:
"MSG_INVALID_SIZE_SECURE_FLASH_RESP: 0x00040006"
In this case, try changing the used USB port, if using USB 3.0, use the USB 2.0 port.
or
"You have not chosen to be assigned a product code, do you wish to continue?"
Says that you are using a product code other than the factory code, there is nothing terrible about this, just click "OK".
This procedure may take 5-6 minutes, after which the program will indicate that the restoration is complete, and the phone will reboot and make the sound familiar to any Nokia phone owner, NOKIA will be displayed on the screen. It remains to be patient and wait. The first launch can take up to 3-4 minutes. After launch, you will receive your favorite phone in a state like from the factory!
Post has been editedy-bee - 06.01.15, 14:15