[X]Assistant

[Wedel]

Firmware BlackBerry Classic Q20
_SQC100-X
Description | Discussion >> | BlackBerry OS FAQ | BBM Groupsavagemessiahzine.com >> | Blackberry club >>

Model Information

пїЅ SQC100-1- "The whole world"
Support for LTE bands: LTE 800, LTE 850, LTE 900, LTE1800, LTE1900, LTE2100, LTE 2600 MHz. HSPA + support: UMTS 800 / UMTS 850, UMTS 900, PCS 1900, IMT 2100 MHz. Support for GSM bands: GSM850, GSM 900, DCS 1800, PCS 1900 MHz

пїЅ SQC100-2- for AT & T operator only
Support for LTE bands: LTE 700, LTE 800, LTE 850, LTE 1700, LTE 1800, LTE 1900, LTE 2100, LTE 2600 MHz. HSPA + band support: UMTS 800 / UMTS 850, PCS 1900, IMT 2100 MHz. GSM band support: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz
Optional: support wireless charging [/ list]

пїЅ SQC100-3- only for Verzion operator
Support for LTE bands: LTE 700, LTE 1700, LTE 1800, LTE 2600 MHz. HSPA + support: UMTS 800 / UMTS 850, UMTS 900, PCS 1900, IMT 2100 MHz. Support for GSM bands: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz. CDMA band support: CDMA 850, PCS 1900 MHz
Optional: support wireless charging

пїЅ SQC100-4- For North America
Support for LTE bands: LTE 700, LTE 850, LTE 1700, LTE 1900, LTE 2100, LTE 2600 MHz.
HSPA + support: UMTS 800 / UMTS 850, AWS 1700, PCS 1900, IMT 2100 MHz. GSM band support: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz

пїЅ SQC100-5- only for Verzion operator
Support for LTE bands: LTE 700, LTE 1700, LTE 1800, LTE 2600 MHz. HSPA + support: UMTS 800 / UMTS 850, UMTS 900, PCS 1900, IMT 2100 MHz. Support for GSM bands: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz. CDMA band support: CDMA 850, PCS 1900 MHz
Optional: no camera, support for wireless charging

Questions and answers

Q: Autoloader does not see the device, what to do?
A: You need to install drivers. Download and install BB Link (during installation, you can select "driver only").

Q: What is the best way to flashing?
A: The most reliable is the Autoloader with the preliminary data reset and without restoring the backup.

Q: Is it possible to lower the firmware?
A: Since version 10.3.2 this feature has been lost.

Q: Can I turn off OTA update notifications?
A: No, it is not. Starting from 10.3.X, you can disable auto-update software, but not a notification about the availability of the update. At 10.2.X this setting is not.

Q: How does BB Protect work in BB OS 10.3.2?
A: Now BB Protect works the same as Apple ID. That is, it is not erased when reset or flashing. Disable this feature before flashing the phone. If you do not have a password for Protect, do not drop or reflash your phone, otherwise you will lose its functionality completely!

Q: When flashing you need to use only the original cable.
A: No, any good quality cable will do.

Q: I do not use applications from Amazon. How do I remove them?
A: You cannot delete them, but you can hide them. To do this, go to Settings - Security and Privacy - Parental Control and there put a tick in front of the "Application Amazon".

Q: Which firmware version is better to install beta / release / leak?
A: It is better to put the official / release version, in order to avoid bugs.

Q: How to backup?
A: Backup is best done throughUltimate BackUp for BlackBerry 10.
PDF Instruction

Programs and drivers

The official BlackBerry Link program with drivers
BlackBerry USB and Modem Drivers ENG (DM4.5 B13) .msi(12.34 MB)

Firmware

Autoloader is the most cardinal and reliable way to flash the device.
Official server of firmware to choose by model

Instructions

Firmware via Autoloader

This method, in my opinion, the most reliable.
Procedure:
1. Install Blackberry Link. At this stage, we are important drivers for Blackberry. You can install only them.
2. Make a backup via Blackberry Link (Attention! A backup can "bring" old bugs to the new firmware or add your own ones. It is advisable not to backup or use Ultimate Backup for BlackBerry 10).
3. Disconnect the phone from the computer and turn it off.
4. Download and unzip the autoloader.
5. Run the autoloader (.exe file).
6. Not including, connect the phone to the computer when the inscription "Connecting to Bootrom" appears in the autoloader window.
7. Enter the device password and press enter (if necessary).
8. The green indicator will light up and the firmware will start. The firmware status (in percent) is displayed in the autoloader window.
9. Disconnect the phone when it starts to reboot, and the autoloader window is closed.
10. Congratulations, the firmware is complete.

The ideal way to flashing (IMHO): reset - autoloader - setting the device as new (without restoring from backup).

Firmware via BlackBerry Link

To update the phone in this way:
1. Set BB Link.
2. In the left menu, select "Software Updates".
3. Select "Check for updates".
4. Install the proposed update.
With this method of firmware I strongly recommend making a backup, as there is the possibility of data loss.
In the program settings there is also a device recovery point, if it does not load at all;)

Useful

Spare parts

Aluminum frame
Plastic frame (back)
Plastic spacer under the keyboard
USB cable with connector (Micro USB Charging Socket)
Battery
Speaker speaker
Back cover
SIM card tray

How is the update on the OTA BlackBerry

CuratorSAMDE

Post has been editedSAMDE - 10.04.18, 06:01

[p.5tar]

It is necessary to remove the BBID lock in 10.3.2, (BB Protect)
Help please find autoloader 10.3.1 (sqc100-1)
According to the instructions I tried to flash 10.3.2 - it did not help, it still asks for bb-id
Or maybe there are other options to get around this problem?

[DeeJay_145]

Brought Blackberry Classic to unlock. After the format asks blackberry id. During the slide issuesucha mistake. Chimera tool is not available.
And furtherthislink is not working.

Post has been editedDeeJay_145 - 25.10.16, 11:17

[Tymnev]

[email protected], 15:37

Help please find autoloader 10.3.1 (sqc100-1)
According to the instructions I tried to flash 10.3.2

According to the instructions, it is sewn 10.3.1 .... for Classic and Lip we sew firmware from zet30.

[Odissey8]

: rolleyes:

People, welcome))

On account of the debt givenBlackberry Classic - SQC100-1
Question: Is it possible to flash it under the standard in Tashkent -CDMA2000 1X ?

I do not shy at all .. thanks: lol:

[nedvorowoy]

Odissey8
Not.
Pzhlsta

[GeekAlessandro]

Guys, I have a request who can pull out native ringtones from the firmware and upload them here?

[Servbek]

Greetings to all!
Trying to unlock Leap after unsuccessful reset to factory (error 015)
I’ve downloaded an autoloader from several sources, but it doesn’t open .. you will laugh, but Blackberry also refused to install the link ... I tried it on several PCs.
Who can place a working version in the cloud and give a reference? Thank you in advance.

[nedvorowoy]

Servbek,
Use Loader for Z30

[Servbek]

It was from him that I downloaded last week. A black window for entering commands opens for a second and closes ...

[Lx_tehnology]

Hello to all
Help please find autoloader 10.3.1 (sqc100-1) to unlock id

[Tymnev]

Lx_tehnology,
On the classic swing from zet30. Especially for the classic it is not.

[grin11111]

please help who can and who does not make it difficult, Blackbarry classic, brought in by the chief (I work in the IT department) asked to clear his reset to do. I made now the phone asks to enter ID, which neither he nor his wife remember, who set it up when buying for a long time does not work. I reset the reset that now I have no idea what to do with it and have never encountered the devices of this company (((

[Tymnev]

grin11111,
and how did the reset? in the phone itself? If in the phone, how they did without knowing the password of AID

[grin11111]

It turns out that you have made the phone, well, I read it on the Internet, if you enter the password 10 times incorrectly, then all data will be reset, I did not bother and entered. I put it on my head (the only thing that I liked about this system is that it protects against incomprehensible letters when it is necessary to enter Blaberi after a certain amount, they thought it’s normal for children)

[belyak222]

Tymnev
So after all reset in the phone without problems becomes without input id. Is not it?

[Tymnev]

belyak222,
Try without a password from Aydi (if the phone is of course activated) make a reset.

[tweenfaster]

Wedel @ 02/18/16, 12:35

I would like to make corrections regarding the firmware for unlock BBID.
I did the same operation, but with developer 10.3.2.159, with a classic. My opinion, this procedure does not necessarily hold with 10.3.1. ***.
Everything went with a bang, so you are welcome. The device is unlocked, now it is sewed by an automatic star 10.3.2.2876.

I Blackberry classic (sqc100-1) was firmware 10.3.2.2836 OS 10.3.2.2876 tried to untie the BBID developer 10.3.2.159 - nothing happened, the phone was sewn, during the connection to the BBID reported that the phone is protected from theft and you need to enter data to which he was attached, others did not accept.

STA100-1 is as I understand it and is the very same z30 from which the firmware is suitable for a classic

Unbind it turned out the firmware BlackBerry 10.3.1 STA100-1 Autoloader 10.3.1.997 taken from herehttp: //developer.black...ha/allautoloaders.htmlafter which the phone automatically downloaded the firmware update to the latest version.

[andybeg]

Greetings. As always, I want something strange - I want to flash the subject with an autoloader, but there is no hand at hand (everywhere on linux machines) so that the preloader could be picked up and it would be useful to have its look and feel, would you tell me?
PS: in the depths of memory I saw that there seems to be an autoloader under linux, but maybe for some other device I could see it, I don’t remember

[maxx-com]

Comrades, tell me about the restoration of bricks. They brought a classic that was discharged during the update.
I downloaded Autoload-STA100-1-10.3.1.997 after flashing the phone was completely worn out and blinked 2 times with a red diode.

[klich007]

M

Topic closed due to lack of activity

Post has been edited$ iLence - 04.10.18, 10:31