> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Teclast Taipower X98 Air 3G - Firmware



Rep: (296)
Teclast Taipower X98 Air 3G - Firmware
PictureTeclast Taipower X98 Air 3G
Discussion » | Purchase » | Accessories » | Firmware » | Installation and discussion of Windows »

Drivers and Utilities

Official firmware

Unofficial firmware

Firmware instructions

Useful




K
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedbrant34 - 28.06.18, 07:48
Reason for editing: X98 Air 3G (C8J7) -Android4.4.4-V2.05-3E46



Rep: (127)
Manual for firmware Android 4.4.4 (2.01 / 2.05) + Windows 8.1 Russian. Dual Boot.

Windows is not hacked (not activated), and will never be hacked by me. Activate yourself ...

Upgrading while upgrading to version 2.05 is not possible. Android and Windows will have to be set from scratch.


Dual Boot firmware consists of several parts:
1. Put on the PC all the necessary drivers and programs.
2. Getting ROOT
3. Android 4.4.4 Firmware
4. Repeat ROOT
5. Firmware via Android dual-boot BIOS
6. Split the disk into several sections and install Android 4.4.4 in one of them
7. Prepare a USB flash drive for PC to install Windows
8. Windows firmware

And also, reinstallation:
9. Reinstall Android without harming Windows.
10. Reinstall Windows without harming Android.

If you have a tablet already with Android v2.00, then it is worthwhile to perform points 1->4->5->6->7->8.
If you already have a tablet with Dual-bios, then it’s worthwhile to use items 1->6->7->8.

Below I will write each item in more detail.

1. Put on the PC all the necessary drivers and programs
1. You need to download the required_software.zip archive
2. Install in the following sequence:
2.1. iSocUSB-Driver-Setup-1.2.0.exe
2.2. IntelAndroidDrvSetup1.5.0.exe
2.3. ManufacturingFlashTool_Setup_6.0.43.exe (uncheck the last window: "Run after installing the program")
2.4. Copy the file CUSTOM_CONFIG.INI to the directory: C: \ Program Files \ Intel \ Manufacturing Flash Tool (for 64-bit versions respectively C: \ Program Files (x86) \ Intel \ Manufacturing Flash Tool)
3. In Andorid, tick the box.Settings ->For developers ->USB debugging
4. Connect the tablet to the PC using USB and make sure that the device is found and the correct drivers are installed.Intel Android Phone / Intel Android ADB Interface
Attached Image

5. Disconnect the USB cable
6. Turn off the full tablet.
7. Hold [POWER] + [VOL -] + [VOL +] and hold until entering the DnX mode
Attached Image

8. Connect the tablet to the PC using USB and make sure that the device is found and the correct drivers are installed.Intel SoC / Intel SoC USB Driver
Attached Image

9. Run the Manufacturing Flash Tool and make sure the configuration is correct.
Attached Image

10. That's it! You have everything prepared for the firmware.

2. Getting ROOT
1. Download the install_root.zip archive on PC
2. Unzip the archive to the root of any disk.
3. Turn on Android
4. Enable USB debugging.
5. Connect the tablet via USB to PC
6. Run install_root \ Root_me! .Bat on the PC
7. At the end, the tablet will reboot.
8. Run the SuperSU program. She will ask to update su. Agree to normal mode.
9. At the end of the SuperSU program, restart the tablet.
10. Everything is ready! You have a ROOT.

3. Android 4.4.4 Firmware
1. Download the archive X98 Air 3G (C6J6) -Android4.4.4-V2.01.zip or X98 Air 3G (C8J7) -Android4.4.4-V2.05.zip
2. Unpack
3. Disconnect the USB cable
4. Turn off the tablet completely
5. Hold down [POWER] + [VOL -] + [VOL +] and hold until entering the DnX mode
6. Run the program Manufacturing Flash Tool
7. Go to the menuFile - Open
8. Select the full_format_and_flash_ fileXxxx_one_boot.xml from the archive, where XXXX is the firmware version
9. Connect USB to the tablet. The firmware will automatically start.
10. At the end, turn off the tablet.

4. Repeat ROOT
1. We do everything from the section2. Getting ROOT

5. Firmware via Android dual-boot BIOS
1. Download the dual_bios (C6J6 & C8J7) .zip archive to PC
2. Unpack the archive
3. Turn on Android
4. Enable USB debugging.
5. Run the dual_bios file on the PC (C6J6 & C8J7) \ flash_bios.bat
6. At the end, the tablet will reboot.
7. After that, you may go into the BIOS and exit Exit does not work. Do not worry. Hold the Power button for 10 seconds.

6. Split the disk into several sections and install Android 4.4.4 in one of them.
1. Download the archive X98 Air 3G (C6J6) -Android4.4.4-V2.01.zip or X98 Air 3G (C8J7) -Android4.4.4-V2.05.zip
2. Unpack the archive
3. Decide what disk size to give for Android. Android approximately takes 2GB. 4GB partition is enough for me.
4. Disconnect the USB cable
5. Turn off the tablet completely.
6. Hold down [POWER] + [VOL -] + [VOL +] and hold until entering the DnX mode
7. Run the program Manufacturing Flash Tool
8. Enter the menuFile - Open
9. Select the full_format_and_flash_ fileXXXX-YGB.xml from the archive, where XXXX is the firmware version and Y is the size of the disk for Android
10. Connect USB to the tablet. The firmware will automatically start.
11. At the end of the tablet off.

7. Prepare a USB flash drive for PC to install Windows
1. In the command line, run diskpart
2. The command displays a list of all devices.
list disk

3. We learn the disk number from the flash drive
4. Choose a flash drive with a command
select disk X

5. Enter the following command to clean the disk (USB)
clean

6. Then create a partition with the command
create partition primary

7. Next, enter the command
select partition 1

8. Next command
active

9. After that, format the disk with the command
format QUICK fs = FAT32 Label = "Winpe"

10. After that, enter a command to automatically assign a letter.
assign

11. On this, the command line can be finished, for this we enter the command
exit

12. Close the command prompt.
13. Copy the contents of X98Air3GWin8.1WithBing.zip archive to a clean USB flash drive.

8. Windows firmware
1. Connect the USB flash drive to OTG
2. Turn on the tablet usingPOWER + VOL + , hold the buttons until a white screen appears with the choice of system.
3. In the upper left corner, put a tick (if it is, we will always be asked about the boot option).
4. Select the win icon on the right small and press the button. This we run the installer win.
5. We are waiting to be established. The end of the installation is the text in the black window. Press any key to continue ...
6. If you have a hub and the keyboard is connected, you can press any button on it. Without the keyboard, I simply turn off the tablet, holding the power button for 10 seconds.
7. Disable everything from OTG
8. Turn on again, and we see already a large Windows selection icon.
9. Boot into Windiws. The first launch is long. Will reboot. In principle, you can not touch, on the system selection screen, it will by default be the last (windows) and the installation will continue
10. Since all drivers will be installed, configure the first run.
11. Making the tilt sensor work - install Drivers \ Kionixx \ kxaccel-1.0.13.20-win8-x86.exe from the USB flash drive. Next, for version C8J7, run 8.reg files (for other revisions, try other reg files). Reboot the system.
12. So that the time was correct at the same time in Android and Windows, you need to apply the fix_windows_time.reg file in Windows. Reboot the system.
13. We use.

9. Reinstall Android without harming Windows.
1. Download the archive from Android prepared by me and unpack.
2. Disconnect the USB cable from the tablet.
3. Turn off the tablet completely.
4. Hold down [POWER] + [VOL -] + [VOL +] and hold until entering the DnX mode
5. Run the program Manufacturing Flash Tool
6. Go to the menuFile - Open
7. Select only_flash_ fileXxxx-YGB.xml from the archive, where XXXX is the firmware version and Y is the size of the disk for Android
8. Connect USB to the tablet. The firmware will automatically start.
9. At the end of the tablet off.

10. Reinstall Windows without harming Android. (Video instruction is available)
1. First prepare the PC. Section 1.
2. Prepare a USB flash drive. Section 7.
3. Copy the entire contents of the archive X98Air3GWin8.1ProStore.zip or X98Air3GWin8.1WithBing.zip. (depending on the selected version of Windows).
4. Turn off the tablet, disconnect the USB.
5. USB flash connect to PC.
6. Run the program Manufacturing Flash Tool
7. Go to the menuFile - Open
8. Select the file USB-Flash \ MFT-Scripts \ wipe_win_all-XGB.xml. Attention!!! The version (size) is the one that you have Android.
9. Hold [POWER] + [VOL -] + [VOL +] on the tablet and hold until entering the DnX mode
10. Connect USB to the tablet. The removal of the old Windows will begin.
11. At the end of the tablet off. If not, turn it off.
12. Pull the USB-Flash from the PC and plug it into the tablet.
13. Start the tablet in OS selection mode - [POWER] + [VOL +]
14. Select the small Windows icon and start the process.
15. According to the result will be in the console window, on a black background written "Press any key for continue ...". Close the window. The tablet will reboot.
16. The flash drive can be removed.

11. Enabling Full Hibernation
1. Download the archive open-PowerCfg 0.0.1.0.zip
2. Run from admin cmd
3. Activate hibernation in the system with the command
powercfg / hibernate on

4. Set the default hibernation file size to 50% of the RAM size
powercfg / hibernate / size 50

5. Unpack on the tablet and run the file Add_Hibernate_to_menu.reg.
6. Reboot
7. Run the program OpenPowerCfg.exe
8. In the "Power buttons and cover" section, activate Hibernation to "Action to close the lid" and "Action of the power button".
Attached Image

9. Reboot.
10. Check the power button. Must go to hibernation. And after 10 seconds, turn on, Windows should boot from scratch but with applications already running.

Tips
1. Making it worktilt sensor - install Drivers \ Kionixx \ kxaccel-1.0.13.20-win8-x86.exe from the USB flash drive. Next, for version C8J7 and C6J6, run 8.reg file (for other revisions, try other reg files). Reboot the system.
2. To solve the time zone problem in Windows, you need to apply the fix_windows_time.reg file.

FAQ
Q: How to flash BIOS from under Win? How to flash BIOS if I only have Windows?
A: I do not know.

Q: I already have Windows flashed. How to flash BIOS and Android?
A: I do not know how to save your Windows. I only know the option to remove everything, install Android, then update the BIOS from it, and then install Windows.

Q: Where are the drivers?
A: Drivers are already embedded in the firmware. Prior to install, you only need a tilt sensor.

Q: How much space does Windows have?
A: With 4GB file under Android, under Windows it remains free after installing 18GB.

Q: I already have dualBoot flashed, how can I flash Win only?
A: Enter the BIOS using the keyboard. Go to the boot menu. Set the flash drive first with the top buttons + or -. Reload tablet in the "Save Changes and Exit" menu. Watch the Win installation. (not verified by me)

Q: Does the camera work fine in Windows? Not turned upside down?
A: I have a revision of the C8J7 tablet, the camera is working properly in Windows, not a mirror. The position sensor is configured in Windows correctly.

Q: Does the camera work normally in Android? Not turned upside down?
A: I have a revision of the C8J7 tablet, the camera is working properly in Android, not a mirror. The position sensor is working correctly. But if I am using the Android version of C6J6, it will be turned upside down. Observe the audit.

Q: What is the BIOS file stitching for dual?
A: Fail need to sew X98Air3GDuala.bin

Files
1. Link to the archive with the necessary software and drivers.required_software.zip
2. Link to the archive with the necessary software for rutting.install_root.zip
3. Link to the archive with Android 4.4.4 v2.01 (20141225) revision C6J6.X98 Air 3G (C6J6) -Android4.4.4-V2.01 (20141225) .zip
4. Link to the archive with Android 4.4.4 v2.05 revision C8J7 (LITE).X98 Air 3G (C8J7) -Android4.4.4-V2.05.zip
5. Link to archive with Dual BIOS revision C6J6 and C8J7.dual_bios (C6J6 & C8J7) .zip
6. Link to the archive for the installation flash drive with Win8.1 with Bing.X98Air3GWin8.1WithBing (12/21/2014_jp2008) .zip(takes 4.2GB)
7. Link to the archive for the installation flash drive with Win8.1 Pro.X98Air3GWin8.1ProStore.zip(takes 3.3GB)
8. Link to the solution to the problem of different time on Android and Windows.fix_windows_time.reg
9. Link to farhiv to enable hibernation.open-PowerCfg 0.0.1.0.zip

Video demonstrations
Demonstration of firmwarehttp://youtu.be/QT9JC98b-AM
Demonstration of flashing Windows without harm Androidhttp://youtu.be/V9R_V_D5oVk
Demonstration of Android flashing without harm to Windowshttp://youtu.be/Eiyg85-Px8E

How to hide the "left" partitions in Windows (partitions for Android)
1. Right-click on the Start menu. Select "Disk Management"
Attached Image
2. Right-click on the "left" section, select "Change drive letter or disk path"
Attached Image
3. Select the drive letter and click "Delete"
Attached Image
4. Confirm the selection by clicking "Yes"
Attached Image

DUAL BIOS Screenshots
Attached Image

Attached Image

Information about Windows revisions
Win 8.1 with Bing version is taken from Onda w975. Fasthere. All drivers from our tablet were installed into it.
Win 8.1 Pro Store Version Takenhere. Store version - only with a winsxs store without a cache based on ru_windows_8_1_pro_vl_x86 (16384 RTM), all updates for December 2014 are integrated (except KB3004394), Framework 3.5 is included, support for old games .... All the drivers from our tablet were installed.


Post has been editedkostya740 - 22.02.15, 12:38
Reason for editing: Added firmware Lite v2.02 (20141223) and v2.01 (20141225)



Rep: (219)
Instructions for fixing the microphone in firmware 2.0 (Android 4.4.4)

Requirements : Rooted X98 Air 3G with the latest Android 4.4.4 ROM (v2.0.0).

Installation : replace file in / system / etc / parameter-framework / settings / audio grant rights rw-r - r- (0644) (root) and reboot!

DOWNLOAD

OPPORTUNITIES:
  • Improved microphone when working with Google Now and Google voice input.
  • GSM / 3G voice calls are cleaner with both a built-in microphone and a Bluetooth headset.
  • Skype voice / video calls have become cleaner with both a built-in microphone and a Bluetooth headset.


Post has been editedENCRON - 18.12.14, 00:53



Rep: (219)
How to enter the DUALBOOT menu if one system is automatically loaded:

  1. Turn off the tablet.
  2. Turn on the tablet by simultaneously pressing the ENABLE and VOLUME UP buttons.
  3. Check in the upper left corner for the presence of a check mark (if it is not there, you need to click to appear)
  4. Boot by clicking on the system icon and the Chinese inscription below.



Post has been editedENCRON - 17.12.14, 19:30



Rep: (219)
How to enter the DROIDBOOT menu after installing the DUALBOOT BIOS, if the dual menu or any system is automatically loaded:

  1. Turn off the tablet.
  2. Turn on the tablet by pressing the ON and VOLUME DOWN buttons.
  3. Hold down until the first Chinese inscription and the second, where TPAD is written below.
  4. When the screen backlight will go away, as if the tablet is now turned off, stop clamping the buttons.


IMPORTANT! EXIT THE DROIDBOOT MENU TO DO ONLY THROUGH THE POWER OFF MENU!

Post has been editedENCRON - 17.12.14, 19:45



Rep: (59)
guys what to do?
Attached Image



Rep: (0)
Why lay out several options for the partition.tbl file if you can just change the value in the penultimate line of code? where 20480000 is the desired amount of memory. In this case, installed 10GB
add -b 5931048 -s 20480000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 / dev / block / mmcblk0



Rep: (296)
If MANUFACTURING FLASH TOOL does not work:

https://yadi.sk/d/1gZvEhFQdSu921140.DLL
https://yadi.sk/d/1RWqu6wQdSu941100.DLL

Throw in the windows / system32 and windows / syswow64 folders

Post has been editedterron66 - 19.12.14, 22:45



Rep: (0)
* terron66, It's just that it is not said in the instructions and I had to check the codes for a long time in order not to miss something important. Therefore, it was a bit dumb to establish this whole thing: D And why did you remove the PID and VID from the instruction? The program did not want to install the firmware for a long time: D



Rep: (219)
Complete instructions on how to fix a non-working market, after firmware up to 2.0 (2.0.1):! UPDATE! Suitable for tablet Air II with firmware 1.02
ERROR CORRECTION FIX
My recommendation is at your discretion!
OPTION 1: Make a complete wipe from Stock Recovery. even if you upgraded to 2.0.1, you have a lot of unnecessary from the last firmware, which you need to get rid of. You will be returned to 2.0, if you already managed to upgrade to 2.0.1. Nothing prevents to re-do the update. After that, you need to give the ROOT tablet rights again. How to make wipe and what is it?

OPTION 2: You can make cleaning programs with В® SD Maid - System Cleaning , in principle, will clean the system in the same way, but in terms of functionality it is still inferior to wipes. Need ROOT. He will not fly off.

IN BOTH CASES, IT IS RECOMMENDED TO REMOVE THE FOLDER system / preinstall THROUGH В® Root Explorer (File Manager)

And now in order:

1) Download В® Link2SD
2) Download apk: Google Play Services , Google Play Store . Next install. It is not necessary to clear the cache if a wipe is made or SD Maid Pro has worked.
3) In the installed Link2SD, select the conversion item to the system application.
4) Reload tablet

Unsubscribe about the work done!

P.S. THE MOST LAZY WAY NOT NEEDING KESH CLEANING (ROOT NEEDED):
1) REMOVE THE PREINSTALL FOLDER (LOCATED AT SYSTEM \ PREINSTALL)
2) THROUGH LINK2SD PROGRAM, MAKE THE NATIVE MARKET SYSTEM
3) REBOOT.


The installed market will auto-update and glitches are possible with the new version. I advise you to disable the auto-update of the market if it is more than comfortable with the functionality. To do this, you need to hack it, replacing the usual one with the vzlmannym:Google Play (Post # 35523618)
Its features:
Description of the features of the modified Google Play
  • In this mode of the market, the license verification library (LVL) is changed, now it responds to the application that its license is correct if a negative answer about the license comes from Google. This means that if you download the original unchanged version of the application (for example, from this forum), it will work as legally purchased. It even works offline, i.e. when there is no internet on the device.
  • Changed button "Return payment". Now, after pressing it, the application remains on your device, and the money is returned. But remember that you can only return the application once. When you buy the second time, he will not offer you to already refuse with the button "Return Payment". The application for which the money was returned is not updated on Google Play itself, you need to look for new versions on the Internet in the forums.
  • The auto update of the market is disabled, i.e. it will not update itself until you manually reinstall it yourself.
  • In this mode, it is NOT DOWNLOADABLE DOWNLOAD FREE PAID APPS!
  • This type of application cheating may not work with online checks on developer servers and other tricks (this is not a panacea).
  • Billing from Google works in the original mode without any changes.




Rep: (31)
Is there any lightweight firmware with the whole Chinese cut out and immediately with the root?



Rep: (59)
Is there any lightweight firmware with the whole Chinese cut out and immediately with the root?

download

Based on 2.0 Stock
Deodexed
Zipaligned
Chinese Apps eliminated (system should boot ES locale)
Nova Launcher as default Launcher
Rooted (Should be SuperSU)
Google Play Fixed (integrated on System partition)
Audio fix by frontier
Two XML, 1Gb System, 512Mb Cache and 5Gb Data (for Dual Boot).

Post has been editedASHOT1234 - 17.12.14, 23:37



Rep: (219)
* ASHOT1234,
With remote Chinese only for revision C8J7, the SUPERCOWS assembly is what I threw to you in lichku.



Rep: (22)
* ASHOT1234, Is this firmware suitable for c6j6?



Rep: (127)
And why did you remove the PID and VID from the instruction? The program did not want to install the firmware for a long time: D

And what, after the instruction point
2.4. Copy the file CUSTOM_CONFIG.INI to the directory: C: \ Program Files \ Intel \ Manufacturing Flash Tool (for 64-bit versions respectively C: \ Program Files (x86) \ Intel \ Manufacturing Flash Tool)


Will it not be automatically set?

Posted 12/18/2014 00:16:

download

Neatly. This can kill the Windows.

Post has been editedkostya740 - 18.12.14, 00:16



Rep: (59)
* jasa821,
She for C6J6 and there is

Will it not be automatically set?

I also did not start, I had to manually register the PID and VID



Rep: (22)
* ASHOT1234, How does it work? The processor does not overheat?



Rep: (171)
what to do?


What to do if Manufacturing Flash Tool 6.0.43 does not start
Download and copy the wdapi1140.dll file to the right places.Attached filewdapi1140.dll(152 KB)

(After downloading the file, right-click on the file properties and make sure that it is not locked by your system. If the file is locked, click unlock)
In Win7 64, put this file in these 3 places:
C: \ Windows \ System32
C: \ Windows \ SysWOW64
C: \ Program Files \ Intel \ xFSTK \ iSocUSB \ driver
If the system is different, search for the wdapi1100.dll file and place the file from the attachment next to it.
After that, the Manufacturing Flash Tool should start.

Posted 12/18/2014 02:05:

Will it not be automatically set?

Not.
So this place should be corrected in the instructions, as in the original link.



Rep: (59)
* jasa821,
I did not set, I have another revision :)



Rep: (31)
* ASHOT1234,
With remote Chinese only for revision C8J7, the SUPERCOWS assembly is what I threw to you in lichku.

And could you throw it here? So to say, for everyone, but I do not find something on the XDA forum.



Rep: (219)
* Vian,
http: //forum.xda-devel...p=56172506&postcount=2


Full version    

Help     rules

Now: 07/14/19, 15:44