GU is a small constructor, which consists of how many devices.
Each such device is running its own FW firmware.
In SPH-DA120 there are 3 such modules that we can and should be updated:
- Basic FW - latest version 1.19 -download
- FW BT module - the latest version 3.41.12 - updated with the main FW, see instructions
- FW system uCOM - latest version 8.57 -pick up here
update instruction
on ENG sph-da120_fw_update_instruction_ver114.pdf (1.4 MB)
for those who have difficulty translating: The update takes place in 2 stages. 1st - SOC firmware update. 2nd - Update BT Module
- update requires a 2GB or more USB disk in fat32 format
- update occurs only in the USB port 1
- never turn off the ignition during the upgrade
- You can update your device only when your car is stopped and set to the handbrake.
- This update is only for the European version including Russia.
Stage 1: Main Firmware Update - Download the file archive update
- unpack the downloaded file
- copy the folderAVIC5000NEX to usb disk to root
- insert USB drive into port 1
- Go to the main screen, clickHome
- settings - >systemic - >System information- >Software Update
- update takes 10 to 15 minutes.
- During the update, the GU will reboot several times.
Stage 2:Update BT module, if you do not need to update version 3.41.11! - The update takes place from the same flash drive as the main firmware
- During the update, you need to disconnect all BT devices from the GU
- Go to the main screen, clickHome
- settings ->BT->BT software update
- restart GU after update
FW history: 1.07 Basic working version.
1.08 was released to support iDatalink Maestro, which is available on US models but not available in Europe.
For convenience, version 1.08 is pre-installed on European devices. But this has no advantage over version 1.07.
1.09 was released for the American version, to solve small problems with work (iDatalink and Pandora)
European devices do not support these services. Therefore, this update will not be available for them.
1.11 in addition to the main firmware, there is an updated firmware for the BT module W03.41.11
1.12 Separate firmware for the SPH-DA120 was not, but met pre-installed.
1.13 Fixed translation errors for German. Added button for language selection in OSD
1.14 The update was released in early 2017. Increased speed.
change log:
- Improve the virtual keyboard problem on iOS 9.x.
- Bluetooth Handsfree mode in Thai.
- Fix the music display problem on iOS 8 and later.
- Minor bug fixes
1.15 - system changes, new protection, new keys for access to Testmode
1.19 from 13.07.2018
- Improve Apple CarPlay connectivity - improved connection CarPlay
I upgraded to version 1.11 but I still have the old FW BT SW03.21.30
Upgrading the BT module firmware to SW03.41.11 - Make sure your choice of sources is worth it.OFF
- and all BT devicesdisabled
- These settings will be available only if the machine is stopped and stands on the handbrake.
- Never turn off the device during the update !!!
Procedure: - Press keyHOME to go to the main screen
- Press keySetting then BT
- SelectUpdate Bluetooth software
update takes about 6 minutes (I have 15-20)
Reboot the device. Check BT version BT module I updated the European FW. - This firmware is not worth updating the device !!! It is not for the DA120, although the version is exactly the same.
https://mega.nz/#!DJwE...rYAJ4-9RlQ2KcF-UnGIdXQUnzip the firmware files to a USB drive of at least 2Gb formatted in FAT32.
PS Compared the version of the firmware BT module. Yes, indeed, FW from the European and American versions are different Easy way to upgrade BT Module to version SW03.41.11
Download the archive
Unpacking
Check CheckSum, run the CheckMd5.bat file.
If all the sum of all files is
OK copy the contents of the folder
Updatefiles on to a usb drive in FAT32
Paste into USB1, turn on ACC ON. GU will boot into testmode
Choose an item
2. Write Program Forcedly => 1
0. Write Bluetooth USB source, Press HOME
After the update process, go to testmode and check the version of the BT module in
1. Version information