After the rise of "problems" with Bittorent Sync decided to switch to Syncthing.
I use the current stable version - v0.10.30 on three devices:
1.
Android4.0.4 in the Sony Ericsson Arc S - Syncthing-Android 0.5.28 of the Market.
2.
Windows7 x64
2.a.
Syncthing -
https://github.com/syn.../releases/tag/v0.10.302.b.
SyncTrayzor -
https://github.com/can...r/releases/tag/v1.0.15This program allows you to manage Syncthing through the "normal" window, not just via the web. Plus, this should immediately inform Syncthing about changes in folders, ie no need to wait for the scan time.
3.
network storageQnap HS-210 - Forum Service
http://forum.qnap.com/...opic.php?f=320&t=97035Arising nuances:
Are common. 1. BTSync comes from the key exchange "
folders"And make sure Syncthing
devicesand only then you can specify which folders are synchronized from the "first" device "second". At any time possible inclusion of a "home folder" option, then all other devices it should be "read-only".
2. Any change in the general settings or to customize individual folders require a restart.
3. The option "Enable the UPnP" does not work. Maybe he nahitril with the router.
4. "Global Detection" I have reached the end of IPv6 only, but for the ip v4 pinged everywhere. Indication of the state - "server announcements - 1/2" or "Global Detection - 1/2".
5. As a result of the previous claims had to manually are forwarding a port on the router and register on android IP address and port. IP address from a static mmenya, "white". After this synchronization to work.
6. Synchronization Status has to look at the device
from wherethere is a synchronization since the device
wherealmost always 100%.
Upd. Already corrected - on the device, where there is a sending, you can see that it is not synced. With the division into folders.
7. During synchronization, do not have enough information about what files are left to synchronize. UPD. I was wrong - you can see through vebinterfeys in the "out of sync". A new window opens with a list.
8. The synchronization time creates ".syncthing.ORIGINAL_NAME" file after downloading zaverzheniya renames the original name. Which is very good.
Android 1. Periodically, when entering the program long hanging message "Waiting for the API."
2. Some operations can only be done through a "web GUI". The easiest call via the program menu.
3. Quite a heavy load on the processor.
4. Sometimes there are situations that took place not restart cleanly - it was necessary to kill the program.
5. Not enough options - Energy savings = "is not used at a charge of less than XX%".
6. I do not understand how the option works "are always working on background" and as a consequence of the "Sync over WiFi only."
UPD . I understood that the inclusion of these two ticks happens next - how to just see a connection via Wi-Fi started Synching and synchronization occurs.
7. The maximum download speed that I saw - 11MB / s. When the load on the CPU reached 97%. ~ 30MB RAM
8. To be able to "bind" devices via QR-code, it requires an external reader.
Windows 1. After installing SyncTrayzor management has become more convenient.
2. When scanning uses a hard drive completely, to a state of single-tasking. When was the initial scan folder size is 66GB caused difficulties.
3. In large file download mode and "idle" CPU utilization is hardly felt ~ 3%.
4. If a lot of files synchronized, the message in the tray "xxx finished synchronization" appears many times.
For the rest, no complaints.
network storage processor ARM.
1. When scanning and downloading operations CPU load to the maximum - I came to 97%. While putting a ~ 30%. At this point, problems with access to the device.
2. Unlike BTSync should work with symlink.
3. It is very convenient that when you specify a folder for synchronization works "autosubstitution" ways and if the folder does not exist, creates.
4. Package qpkg put regular way, but not through the repository. Stop / start as the rest, control settings sync across the web face.
Verdict - usable.
P.S. While I am writing out v0.11.0:
- "Syncthing v0.11 does not support synchronizing with older versions (v0.10 or older)."
- "CPU Usage Improvements"
https: //forum.syncthin...1-0-release-notes/2426https://github.com/syn...g/releases/tag/v0.11.0For my store yet this version, so I do not try.
P.S.S used on their NAS - QNAP HS-210. Stable. Storage on ARM, therefore, when scanning otzhiraet to 95% of the CPU time.
Post has been editedCd_spb - 25.04.18, 19:15Reason for editing: Data on the NAS.