[X]Assistant

[SergejM2]

Nomi C07000 - Firmware

Description | Firmware пїЅ

Important! Varieties of the model!

Drivers and Utilities

Tablet driver
Driver for Preloader mode
SP Flash Tool is a flash driver for MTK smartphones.

Official firmware

Firmware (FlashTool firmware)

unofficial firmware

Firmware for Nomi C07000 on elink-mz706-d3-v2 Android 4.2.2 board
Firmware for USB flash drive for Elink-MR706
NVRAM backup from Nomi C07000 on elink-mz706-d3-v2 board

NomiC07000-3GbUsrdata(The size of the internal memory is increased to 3 GB, the size of the internal SDcard is reduced to 2.62 GB. Root is embedded in the firmware. Flash the firmware with the firmware according to the instructions (file! Read.txt).)

Instructions

We charge the battery at least 50%.
Unpack the driver, FlashTool, firmware. Better to the root of the disk C.
Install the driver (installation instructions in the file Instruction.bmp).
Start FlashTool, click on "Skatter - loading"
We indicate to the program the file "MT6582_Android_scatter.txt" from the folder with the firmware that you unpacked.
Turn off the tablet.
Click on "doownload" and connect the tablet to the PC.
If the system asks for a driver, we point to the folder with the drivers.
We are waiting for everything to be established.
After the end of the firmware, a green circle will come out - you can disconnect the tablet from the PC and use it.

If after clicking "download" and connecting the tablet to the computer, the Flash Tool swears, then select the "Firmware Download" tab instead of "Download Only".

Getting ROOT Rights

Nomi C07000 - Firmware (Post 77romantik77 # 48547259)

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 20.05.17, 23:57

Reason for editing: Firmware for Elink-MR706 revision flash drive

[Nikoz47]

M

We move to subsection "Other brands"

Post has been editedNikoz47 - 03.12.14, 23:25

[1 week 11]

Tell me I bought a nomi A07000 device in Allo, everything seems to be working, but when connected, WI-FI displays several available networks, one of which is mine. When connected to it, the tablet connects for a long time (authentication, connected and protected, etc.), but there is no Internet. Sometimes after several times on / off. Wi-fi still connects but not for long, then it is chopped off. A laptop and 2 smartphones are connected to the router, I tried to change the channels on it and the connection methods and also made the network open not a fig helped. I sin on the buggy module of the tablet or firmware. Who has any thoughts on this?

Right now, I reset the settings in the tablet, it rebooted and when you turn on the waffle, it does not find more than one network, a constant search for available networks.

Post has been edited1 week 11 - 19.12.14, 14:27

[1 week 11]

Can someone tell me if the firmware from S07000 is suitable for A07000, or at least where to get the firmware for NOMI A07000

[SergejM2]

1 wife @ 12/23/2014, 12:33

Can someone tell me if the firmware from S07000 is suitable for A07000, or at least where to get the firmware for NOMI A07000

Link to post with firmware
Help me find the firmware (Post # 35957919)

[m3f1k]

Who will tell you how to get on this unit Root?
Preferably without a PC.

[xbox360k550]

Hello to all. How are things going with the battery life of this device? With an Akum of 2100 mAh, I personally have a charge of 4 to 4.5 hours (with a good start). I do not know the problem, or it should be ...

[SergejM2]

m3f1k @ 12/29/2014, 5:29 PM

Who will tell you how to get on this unit Root?
Preferably without a PC.

Both firmware in this thread already with root inside. Enough to flash. Or use KingoRoot.

[sydo]

Tell me please please the firmware build number of this device? Very necessary!

[Viser]

Tell me if there is a native firmware from the manufacturer? When trying to flash, the flash unit issues:
FLASHTOOL ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
There is no file yet yet!
1.Please check if the DA path is correct.
2.Please check if all the ROM files exist.
3.Please check if the ROM files.
How can this be fixed?

[1 week 11]

The forum users need your help, today the tablet (Nomi A07000), has become buggy, goes into a constant reboot after 10 seconds. work. The tablet before that, I reflashed the firmware from this thread from Intexa. I decided to flash it again, for this I launched RockChip Batch Tools I pointed out the firmware, connected the tablet (I pressed the + buttons and turned it on), the prog recognized the green square on it. After that, I uploaded the firmware at the end and said that everything was successful (a green bar in the prog). But the joy was premature, when turned on at the boot stage, everything hangs. Behind the reset button, to withdraw it from a stupor but everything repeats. Already flashed the same result several times. What to do with it?

[SergejM2]

sydo @ 01/06/2015 11:19

Tell me please please the firmware build number of this device?

Here is

[SergejM2]

Viser @ 01/06/2015, 18:46

When trying to flash, the flash unit issues:
FLASHTOOL ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Sew the official in Download only mode.
Or, see which checkboxes in the USB flash drive are not set, because no files were found (for example, cache, usrdata) and make copies of the boot.img file, renaming them to cache.img, usrdata.img. In the scatter file, check that the appropriate sections CACHE, USRDATA in the line file name indicate the file name, respectively cache.img, usrdata.img. Firmware in firmware upgrade mode. In this case, after the firmware is not including another tablet, go to recovery and make a wipe.

[Viser]

[email protected], 13:14

Sew the official in Download only mode. Or, see which checkboxes in the USB flash drive are not set, because no files were found (for example, cache, usrdata) and make copies of the boot.img file, renaming them to cache.img, usrdata.img. In the scatter file, check that the appropriate sections CACHE, USRDATA in the line file name indicate the file name, respectively cache.img, usrdata.img. Firmware in firmware upgrade mode. In this case, after the firmware is not including another tablet, go to recovery and make a wipe.

Thank you, these files were really not registered in the scatter, the firmware that is here as official is also modified (root is built in), in both firmware I have jambs in account synchronization, and in both when installing a third-party launcher it’s not possible to add widgets; . Please, who can lay out the firmware from a bare tablet.

[SergejM2]

[email protected], 13:04

In both firmwares, I have shoals in account synchronization, and in both, when installing a third-party launcher, it is not possible to add widgets, the application setting drops

In the Settings application, there really are incorrect labels (in all languages, indexes are shifted). But rebuild it will not be easy. But the synchronization itself works fine for me on different types of accounts.
As for widgets, I have a Google launcher besides my native launcher. In both launchers, widgets are perfectly added and work. Other launchers did not install.

[Viser]

Does anyone have a backup under the flash tool of the original firmware? The problem with a bad connection, you need to carry it back (you need to bring it to its original form. If there is, please post it.

[kara111]

Tell me, I have a tablet Nomi C07000, downloaded the game and popped up this. what to do? or how to make factory reset?

Post has been editedsnekt @ - 26.04.15, 14:42

Reason for editing: The rules of the section "Android - firmware" p.3.8.

[SergejM2]

[email protected], 15:12

How to make factory reset?

Recovery:
1. Press and hold simultaneously the "Volume +" and "Turn On" buttons.
After 5-6 seconds, four lines appear on the screen, the last two of them, "Recovery mode" and "Normal boot".
2. Release both buttons.
3. Make sure that the arrow points to the "Recovery mode" line. If the arrow points to the "Normal boot" line - use the "Volume +" button to move the arrow to the "Recovery mode" line.
4. Press the "Volume -" button
After 5-10 seconds, Recovery will boot.
5. Press the "Volume -" button to select the line "wipe data / factory reset".
6. Click the "Enable" button.
7. Press the "Volume -" button to select the line "Yes - delete all user data".
8. Click the "Enable" button.
Wait 5-10 seconds for the process to finish.
9. Press the "Volume -" button to select the line "reboot system now", if not selected.
10. Press the "Enable" button.
The tablet will reboot into normal mode.

[dfyz202]

how to install root

[freyddj]

dfyz202
With kingi rootKingo Android Root (Post # 37094700)First you need to roll on the computer under the tablet.

Post has been editedfreyddj - 24.01.15, 01:38

[freyddj]

Getting Root rights for NOMI tablets using a PC
1. Install drivers for your device.
2. Download the kingo root programKingo Android Root
3. Install Kingo ROOT.
4. Start Kingo ROOT and connect the phone with USB debugging enabled and with the tick set to "Unknown sources".
5. Kingo ROOT will start downloading drivers and install them automatically. (If the driver is not downloaded / installed)
6. After installing the driver, the ROOT button will appear, click on it.
7. We are waiting for the root to be set and restart the tablet.
8. We rejoice at the resulting root.
[Quote] please add to the header :-)